Programs After Market Services (PAMS) Technical Documentation NMP Part No.0275557 NPM–9 SERIES CELLULAR PHONES – NOKIA 6510 – NPM–9 issue 1: 02/2002 Copyright 2001. Nokia Corporation. All Rights Reserved.
NPM–9 Foreword PAMS Technical Documentation AMENDMENT RECORD SHEET Amendment Page 2 Date Inserted By Comments 02/2002 OJuntunen First issue. Nokia Corporation.
PAMS Technical Documentation NPM–9 Foreword NPM–9 SERIES CELLULAR PHONES SERVICE MANUAL CONTENTS: 1. Foreword 2. General Information 3. System & UI Module 4. Part lists 5. Product Variants 6. Service Software & Concepts 7. Service Tools 8. Disassembly Instructions 9. Troubleshooting Instructions 10. Accessories (Non–serviceable) 11. CARK132 Installation Guide 12. Schematic Diagrams Issue 1 02/2002 Nokia Corporation.
NPM–9 Foreword PAMS Technical Documentation IMPORTANT This document is intended for use by qualified service personnel only. Company Policy Our policy is of continuous development; details of all technical modifications will be included with service bulletins. While every endeavour has been made to ensure the accuracy of this document, some errors may exist. If any errors are found by the reader, NOKIA Corporation should be notified in writing.
PAMS Technical Documentation NPM–9 Foreword Warnings and Cautions Please refer to the phone’s user guide for instructions relating to operation, care and maintenance including important safety information. Note also the following: Warnings: 1. CARE MUST BE TAKEN ON INSTALLATION IN VEHICLES FITTED WITH ELECTRONIC ENGINE MANAGEMENT SYSTEMS AND ANTI–SKID BRAKING SYSTEMS. UNDER CERTAIN FAULT CONDITIONS, EMITTED RF ENERGY CAN AFFECT THEIR OPERATION.
NPM–9 Foreword PAMS Technical Documentation ESD Protection Nokia requires that phone repair places have sufficient ESD protection (against static electricity) when servicing cellular phones. A cellular phone, which is ready for use, can be handled normally without ESD protection. The SIM card and battery can be replaced in normal conditions of use. To replace the color cover ESD protection must be applied, except for the phone covers which can be replaced by the customer.