PAMS Technical Documentation NPM–9 Series Transceivers Disassembly Instructions Issue 1 02/2002 Nokia Corporation
NPM–9 Disassembly Instructions PAMS Technical Documentation CONTENTS Disassembly of NPM–9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NPM–9 Disassembly Instructions PAMS Technical Documentation Disassembly of NPM–9 1. DISASSEMBLY INSTRUCTIONS Attention : Before starting this procedure you must take care of ESD precautions like being in your ESD– area and connecting your arm wrist. Push the unlock–button and move the battery cover in direction to the System Connector. Pull the A–Cover and B–Cover apart to open the unit. Remove the six screws with screwdriver Torx T6 in Before removing the UI module LU9 this clip has the shown order.
NPM–9 Disassembly Instructions PAMS Technical Documentation you need to change the speaker you shouldn t grab it at the spring connectors. Take tweezers and lift the speaker as shown in the picture. Turn around the B–Cover. If the System Connectoris The System Connector contains Vibra Motor and Microphone, which can be easily pushed out of the System Connector. Grab the Keymatand remove it. It is always good to protect the window also from the inner side.
