User guide

14
Get started
■ Charge the battery
Always switch the device off and disconnect the charger before removing the battery.
Charging the BL-4CT battery with the AC-4 charger takes about 1 hour and 30
minutes while the phone is in the standby mode.
1. Connect the charger to a wall socket.
2. Connect the lead from the charger to the charger
connector on the side of your phone.
If the battery is completely discharged, it may take
several minutes before the charging indicator appears
on the display or before any calls can be made.
■ Open and close the phone
To open the fold, press the
open fold key (1). The fold
swings open (2) to about 161
degrees. Do not try to force
the fold open more.
Close the fold manually.
When the phone is switched
off, or the battery charge is
low, open the fold manually.
Keep the magnet and anchor plate clean for the open fold key to function
properly.
■ Switch the phone on and off
1. Press and hold the power key.
2. If the phone asks for a PIN or a UPIN code,
enter the code (displayed as ****), and select
OK.
When you switch on your phone for the first time,
and the phone is in the standby mode, you are
asked to get the configuration settings from your
service provider (network service). Confirm or
decline the query. See “Configuration,” p. 36 and
“Configuration settings service,” p. 15.