Electronic user’s guide released subject to "Nokia User’s Guides Terms and Conditions, 7th June, 1998" User’s Guide for Nokia 6800 9354470 Issue 1
DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product NHL-6 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/. Copyright © 2003 Nokia. All rights reserved.
Contents FOR YOUR SAFETY ..............................................................................................11 Access codes ........................................................................................................14 Overview of the phone functions ......................................................................16 Messaging concept ...................................................................................................................................
Switching the phone on and off ...........................................................................................................31 Opening the flip .........................................................................................................................................33 Switching the keyboard lights on or off..........................................................................................36 Keypad lock (Keyguard) ...........................................................
Editing a name, number or text item ..................................................................................................53 Erasing names and numbers...................................................................................................................54 Copying contacts .......................................................................................................................................54 Sending and receiving a business card .......................................
Inbox, Outbox, Saved and Sent items folders.............................................................................77 Multimedia messages memory full ...............................................................................................77 Deleting messages .................................................................................................................................78 E-mail messages..............................................................................................
Auto update of date and time ........................................................................................................95 Call settings .............................................................................................................................................95 Call divert..............................................................................................................................................95 Anykey answer.................................................
Security settings.................................................................................................................................. 104 Restore factory settings .................................................................................................................... 105 Organiser (Menu 5) ................................................................................................................................ 106 Alarm clock ..................................................
Saving and changing personal card information ................................................................... 123 Personal notes .................................................................................................................................. 124 Wallet settings ................................................................................................................................. 124 Guidelines for paying for your purchases with wallet..........................................
Direct calling..................................................................................................................................... 141 Ending a WAP connection ................................................................................................................ 141 Appearance settings of the WAP browser ................................................................................... 141 Bookmarks...................................................................................
FOR YOUR SAFETY Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed information is given in this manual. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Don’t use a hand-held phone while driving. INTERFERENCE All wireless phones may get interference, which could affect performance. SWITCH OFF IN HOSPITALS Follow any regulations or rules.
QUALIFIED SERVICE Only qualified personnel may install or repair phone equipment. ACCESSORIES AND BATTERIES Use only approved accessories and batteries. Do not connect incompatible products. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user’s guide for detailed safety instructions. Do not connect incompatible products. BACKUP COPIES Remember to make backup copies of all important data. WATER-RESISTANCE Your phone is not water-resistant. Keep it dry.
■ Network Services The wireless phone described in this guide is approved for use on the EGSM 900 and GSM 1800 networks. Dualband is a network dependent feature. Check with your local service provider if you can subscribe to and use this feature. A number of features included in this guide are called Network Services. These are special services that you arrange through your wireless service provider.
Access codes • Security code (5 to 10 digits): The security code protects your phone against unauthorised use, and is supplied with the phone. The preset code is 12345. When you have changed the code, keep the new code secret and in a safe place separate from your phone. To change the code, and to set the phone to request it, see Security settings on page 104. If you key in an incorrect security code five times in succession, the phone may display Code error. Wait for five minutes and key in the code again.
If the codes are not supplied with the SIM card, contact your local service provider. • Barring password (4 digits): The barring password is required when using the Call barring service, see Security settings on page 104. You can obtain the password from your service provider. • Module PIN and signing PIN: The module PIN is required to access the information in the security module. See Security module on page 144. The signing PIN is needed for the digital signature. See Digital signature on page 147.
Overview of the phone functions Your Nokia 6800 phone is approved for use on EGSM 900 and GSM 1800 networks. It provides many functions which are practical for daily use, such as the messaging keyboard for easy and convenient writing, calendar, clock, alarm clock, countdown timer, calculator, games and many more. ■ Messaging concept Your phone combines the functions of a normal mobile phone and a messaging device.
sound components presaved in your phone as ringing tones and message alert tones. The phone supports Scalable Polyphonic MIDI (SP-MIDI) format. You can receive polyphonic ringing tones via the multimedia service, see Reading and replying to a multimedia message on page 76 or you can download them via the gallery menu, see Gallery (Menu 8) on page 114, or via PC Suite, see PC Suite on page 149.
■ Loudspeaker This feature allows you to use your phone as a loudspeaker during a call, such as a conference call, and carry out other tasks simultaneously, while you talk. You can, for example, write messages, check your calendar notes or play games. See Loudspeaker on page 42. ■ MIDP JavaTM applications Your phone supports Java and includes some Java applications and games that have been especially designed for mobile phones.
■ Shared memory The following features in this phone may share memory: contacts, text and multimedia messages, images and ringing tones in gallery, calendar, to-do notes, Java games, applications, notes application and e-mail. Using any such features may reduce the memory available for any features sharing memory.
1. Your phone ■ Keys (flip closed) 1. Power key Switches the phone on and off. For example, when the keypad is locked, briefly pressing the power key turns the phone’s display lights on for approximately 15 seconds. 2. Volume key Adjusts the volume of the earpiece, the headset and the loudspeaker. 3. Selection keys and The function of the keys depends on the guiding text shown on the display Copyright 2003 Nokia. All rights reserved.
above the keys, for example Menu and Contacts in standby mode. 4. 4-way joystick Enables scrolling through names, phone numbers, menus or settings. The 4way joystick is also used to move the cursor up and down, and right and left when writing text, using the calendar, and in some game applications. 5. 6. 7. dials a phone number, and answers a call. In standby mode it shows the most recently called number. ends an active call. Exits from any function. - enter numbers and characters.
■ Keys (flip open) When you open the flip, the display graphics are rotated 90 degrees and the left and right selection keys change positions, but the guiding texts above the left and right selection keys do not change. For using the keys to write and edit text, see Writing text using the messaging keyboard on page 44. 1. Keyboard light key switches the keyboard light on or off to provide additional lighting while using the keyboard. See also Switching the keyboard lights on or off on page 36. 2.
5. Shift keys and enter upper case letters and symbols. You can either press the shift key first and then the desired key or press both keys at the same time. 6. Space bar keys and enter a space. 7. Power key/ Left selection key switches the power on, when the phone’s messaging keyboard is open and the phone is switched off. The function of the left selection key depends on the guiding text shown on the display above the key. 8. Character key (Chr) opens a set of characters and symbols during editing.
5. The right selection key in standby mode is Contacts. See also Essential indicators in standby mode on page 24. Screen saver With the flip closed, the phone automatically activates a digital clock screen saver to save power in standby mode. It will be activated after a certain length of time when none of the phone functions have been used, see Screen saver on page 102. Press any key or open the flip to deactivate the screen saver. Note that if you have not set the time, 00:00 is displayed.
The phone’s keypad is locked. See Keypad lock (Keyguard) on page 36. and Security keyguard on page 98. The phone does not ring for an incoming call or a text message because Incoming call alert is set to Off and Message alert tone is set to Off. See Tone settings on page 102. The alarm clock is set to On. See Alarm clock on page 106. The countdown timer is running. See Countdown timer on page 128. The stopwatch is running in the background. See Stopwatch on page 129.
Calls are limited to a closed user group. See Security settings on page 104. The timed profile is selected. See Profiles (Menu 3) on page 93. , or A headset, handsfree or loopset accessory is connected to the phone. To enable the phone to show the time and date in standby mode. See Clock on page 94 and Date on page 95. ■ Headset Connect the HDS-3 or HDB-4 headset to the Pop-Port connector of your phone as shown in the picture. Copyright 2003 Nokia. All rights reserved.
You can carry the headset as shown in the picture. Copyright 2003 Nokia. All rights reserved.
2. Getting started ■ Installing the SIM card and the battery • Keep all miniature SIM cards out of the reach of small children. • The SIM card and its contacts can easily be damaged by scratches or bending, so be careful when handling, inserting or removing the card. • Before installing the SIM card, always make sure that the phone is switched off and then remove the battery. 1. With the back of the phone facing you, press the back cover release button (1) and slide the back cover off the phone.
2. To release the SIM card holder, slide the card holder backwards (2) and lift it up (3). 3. Insert the SIM card into the SIM card holder (4). Make sure that the SIM card is properly inserted and that the golden contact area on the card is facing downwards. 4. Close the SIM card holder (5) and slide it back to its place (6). Copyright 2003 Nokia. All rights reserved.
5. Replace the battery (7). 6. Direct the back cover towards the locking catches on the front cover 8) and slide the back cover until it locks into place (9). Copyright 2003 Nokia. All rights reserved.
■ Charging the battery 1. Connect the lead from the charger to the socket on the bottom of your phone. 2. Connect the charger to an AC wall socket. The text Charging is displayed briefly if the phone is switched on. If the battery is completely flat, it may take a few minutes before the charging indicator appears on the display or before any calls can be made. You can use the phone while the charger is connected. The charging time depends on the charger and the battery used.
Note that if the phone displays Insert SIM card even though the SIM card is properly inserted, or SIM card not supported, contact your network operator or service provider. Your phone does not support 5-Volt SIM cards and the card may need to be changed. • If the phone asks for a PIN code, key in the PIN code (displayed as ****), and press OK. See also PIN code request in Security settings on page 104 and on page 104.
■ Opening the flip 1. Hold the phone with both hands and open the flip as shown in picture (1). Copyright 2003 Nokia. All rights reserved.
2. Turn the flip until you hear it click into place (2). Make sure that the golden contacts of the flip and the phone touch each other. 3. Turn the phone to a horizontal position and hold it as shown in picture (3). The loudspeaker function automatically activates when the flip is open. Copyright 2003 Nokia. All rights reserved.
Copyright 2003 Nokia. All rights reserved.
Switching the keyboard lights on or off • The keyboard lights are not lit automatically, when you open the flip. To turn on the lights, press the light key on the top left corner of the keyboard. The keyboard lights are switched off after a certain time, but they are turned on again as soon as you press any key. • To switch the keyboard lights off, press the keyboard light key or close the flip.
For locking the keypad during a call, see Options during a call on page 42 and for setting the security keyguard, see Security keyguard on page 98. Note: When Keyguard is on, calls may be possible to the emergency number programmed into your phone (e.g. 112 or other official emergency number). Key in the emergency number and press . The number is displayed only after you have keyed in its last digit. Copyright 2003 Nokia. All rights reserved.
3. Call functions ■ Making a call 1. Key in the phone number, including the area code. If you key in an incorrect character, press Clear to delete it. With the flip open in standby mode, pressing any number key starts a call procedure. For international calls, press twice for the international prefix or + if the flip is open, (the + character replaces the international access code) and then key in the country code, the area code without the leading 0, if necessary, and finally the phone number. 2.
Calling your voice mailbox • In standby mode when the flip is closed, press and hold , or press and When the flip is open, press and hold the corresponding number key on the keyboard. If the phone asks for the voice mailbox number, key it in and press OK. See also Voice messages on page 85. Speed dialling a phone number Before you can use speed dialling, do as follows: 1. Press Menu, select Settings, Call settings and Speed dialling. Set the setting to On. See also Speed dialling on page 96. 2.
Making a conference call Conference calling is a network service that allows up to six people to take part in a conference call. 1. Make a call to the first participant. 2. To make a call to a new participant, press Options and select New call. 3. Key in the phone number of the new participant, or retrieve it from the memory, and press Call. The first call is put on hold. 4. When the new call has been answered, join the first participant in the conference call. Press Options and select Conference. 5.
■ Answering or rejecting an incoming call Press to answer an incoming call and press Press to reject an incoming call. to end the call. If you press Silence, only the ringing tone is muted. Then either answer or reject the call. If the HDB-4 or HDS-3 headset is connected to the phone, you can answer and end a call by pressing the headset key. Tip: If the Divert if busy function is activated to divert the calls, for example to your voice mailbox, rejecting an incoming call will also divert the call.
■ Options during a call Many of the options that you can use during a call, are network services. Press Options during a call for some of the following options: Mute or Unmute, End call, End all calls, Contacts, Menu and Hold or Unhold, New call, Conference, Private, Answer, Reject and Loudspeaker or Handset. Lock keypad to activate the keypad lock. Send DTMF to send DTMF tone strings, for example passwords or bank account numbers. Key in the DTMF string or search for it in contacts and press OK.
• When the flip is closed, press Options and select Handset or press Handset, if available. If you have connected the CARK126 handsfree unit or the headset to the phone, Handset in the options list is replaced with Handsfree or Headset and the selection key Handset with Handsfr. or Headset respectively. The loudspeaker is deactivated automatically when you end the call or call attempt, connect the handsfree unit or headset to the phone, or close the flip.
4. Writing text Your phone is especially designed for easy and comfortable text writing. The easiest way is to write with your thumbs using the messaging keyboard. You can, for example, start writing a message using the keyboard, close the flip and continue writing the same text using either traditional or predictive text input. Note that the predictive text input is not available, when the flip is open.
consecutively, or press and hold both the shift key and the desired letter key at the same time. To write in upper case only, press or twice. • To delete characters from the display, press or Clear. Pressing backspace briefly clears one character at a time, while longer keypress deletes characters more quickly. • To add a space, press one of the space keys ( bottom of the keyboard. • To force a line feed, press or ) at the .
■ Writing text when the flip is closed You can use predictive or traditional text input when the phone’s flip is closed .When you are writing text, predictive text input is indicated by and traditional text input by on the top left of the display. You can change the character case, indicated by , or by pressing . The number mode is indicated by , and you can switch between the letter and number modes by pressing and holding .
Example: To write Nokia when the English dictionary is selected, press once for N, once for o, once for k, once for i and once for a. To insert a number while in letter mode, press and hold the desired number key. For more instructions for writing text, see Tips for writing text on page 48. 2. When you have finished writing the word and it is correct, confirm it by adding a space with or by moving the joystick to the right.
To insert a number while in letter mode, press and hold the desired number key. • If the next letter you want is located on the same key as the present one, wait until the cursor appears, or move the joystick to the right, and then key in the letter. • The most common punctuation marks and special characters are available under the number key . More instructions for writing text, see Tips for writing text on page 48.
• To insert a special character when using traditional text input, press or when using predictive text input, press and hold , or press Options and select Insert symbol. Move the cursor with the joystick to a character and press Use to select it. You can also scroll to a character by pressing and select it by pressing . , , or , The following options are available when writing text messages: • To insert a phone number while in the letter mode, press Options and select Insert number.
5. Contacts You can save names and phone numbers (contacts) in both the phone’s memory and in the SIM card’s memory. • You may save up to 500 names with numbers, addresses and text for each name in the phone’s memory. The number of names that can be saved depends on both the length of the names, and the number and length of the phone numbers and text items. Contacts use shared memory, see Shared memory on page 19. • The phone supports SIM cards that can save up to 250 names and phone numbers.
4. Memory status to see how many names and phone numbers are currently saved and how many can still be saved in the selected memory for contacts. ■ Saving names and phone numbers (Add contact) Names and numbers will be saved in the memory in use, see Selecting settings for contacts above. 1. Press Contacts and select Add contact. 2. Key in the name and press OK. See Using traditional text input on page 47. 3. Key in the phone number, and press OK. To key in numbers, see Making a call on page 38. 4.
1. Make sure that the memory in use is either Phone or Phone and SIM. See Selecting settings for contacts on page 50. 2. To access the list of names and phone numbers, move the joystick up or down in standby mode. 3. Scroll to the name saved in the phone’s internal contacts to which you want to add a new number or text item, and press Details. 4. Press Options and select Add number or Add detail. 5. Select one of the following number types: General or text types Note.
■ Searching for a name in contacts 1. Press Contacts and select Search. 2. You can key in the first characters of the name you are searching for in the pop-up window. Move the joystick up or down to scroll through the names in the list, and right or left to move the cursor in the pop-up window 3. Scroll to the name you want, and press Details. Scroll to view the details of the selected name. Tip: To quickly find a name and phone number, move the joystick up or down in standby mode.
■ Erasing names and numbers Press Contacts and select Delete. • To delete names and numbers one by one, select One by one and scroll to the name (and number) that you want to delete. Press Delete and press OK to confirm. • To delete names and numbers in contacts simultaneously, select Delete all and then scroll to contacts, Phone or SIM card and press Delete. Press OK and confirm with the security code.
• If you select All or Default numbers, press OK when Start copying? or Start moving? is displayed. ■ Sending and receiving a business card You can send and receive a person’s contact information as a business card either via IR or as an Over The Air (OTA) message if supported by the network. Receiving a business card To receive a business card via IR, make sure that your phone is ready to receive data through its IR port, see Infrared on page 130.
■ Speed dialling To assign a number to a speed dialling key, press Contacts, select Speed dials and scroll to the desired speed dialling key number. Press Assign, press Search, and select first the name and then the number you want to assign. If the Speed dialling function is off, the phone asks whether you want to activate it. Press Yes to activate it, see Speed dialling on page 96. To make a call using the speed dialling keys, see Speed dialling a phone number on page 39.
■ My numbers The phone numbers assigned to your SIM card are saved in My numbers if this is allowed by the card. To view the numbers press Contacts and select My numbers. Scroll to the desired name or number, and press View. ■ Caller groups You can arrange the names and phone numbers saved in contacts into caller groups.
6. Using the menu The phone offers you an extensive range of functions, which are grouped into menus. Most of the menu functions are provided with a brief help text. To view the help text, scroll to the menu function you want and wait for 15 seconds. To exit the help text, press Back. See Help text activation on page 100. ■ Accessing a menu function By scrolling 1. To access the menu, press Menu. 2.
• To access the menu, press Menu. Key in quickly, within two seconds, the index number of the menu function you want to access. Example: To set the Anykey answer to On, press Menu, , and . Press Back to return to the previous menu level, and Exit to exit the menu. Note that accessing the menu functions in menu 1, press Menu, and the rest of the digits of the shortcut number. Copyright 2003 Nokia. All rights reserved.
■ List of menu functions 1. Messages 1. Text messages 1. Create message 2. Inbox 3. Sent items 4. Archive 5. Templates 6. My folders 7. Distribution lists 8. Delete messages 2. Multimedia msgs. 1. Create message 2. Inbox 3. Outbox 4. Sent items 5. Saved items 6. Delete messages 3. E-mail 1. Open 1. Create e-mail 2. Retrieve 3. Send now 4. Send and retrieve 5. Inbox 6. Outbox 7. Deleted items Copyright 2003 Nokia. All rights reserved.
8. Sent items 9. Drafts 10.Archive 11.Settings 2. Web access 3. Service settings 4. Details 4. Chat 5. Voice messages 1. Listen to voice messages 2. Voice mailbox number 6. Info messages 1. Info service 2. Topics 3. Language 4. Info topics saved on SIM card 5. Read1 7. Message settings 1. Text messages 2. Multimedia msgs. 3. Other settings 8. Service commands 2. Call register 1. Missed calls 1. This menu is shown only if any info messages are received. Copyright 2003 Nokia. All rights reserved.
2. Received calls 3. Dialled numbers 4. Delete recent call lists 1. All 2. Missed 3. Received 4. Dialled 5. Call duration 1. Last call duration 2. Received calls’ duration 3. Dialled calls’ duration 4. All calls’ duration 5. Clear timers 6. Call costs 1. Last call units 2. All calls’ units 3. Call cost settings 7. GPRS data counter 1. Data sent in last session 2. Data received in last session 3. All sent data 4. All received data 5. Clear counters 8. GPRS connection timer 1. Duration of last session 2.
3. Profiles 1. General 1. Activate 2. Personalise 3. Timed 2. Silent (same submenus as in General) 3. Meeting (same submenus as in General) 4. Outdoor (same submenus as in General) 5. Pager (same submenus as in General) 4. Settings 1. Time and date settings 1. Clock 2. Date 3. Auto-update of date & time 2. Call settings 1. Call divert 2. Anykey answer 3. Automatic redial 4. Speed dialling 5. Call waiting 6. Summary after call 7. Send my caller identity 8. Line for outgoing calls1 3. Phone settings 1.
1. Language 2. Memory status 3. Security keyguard 4. Cell info display 5. Welcome note 6. Network selection 7. Confirm SIM service actions 8. Help text activation 9. Start-up tone 4. Display settings 1. Wallpaper 2. Colour schemes 3. Operator logo 4. Screen saver timeout 5. Display brightness 5. Tone settings 1. Incoming call alert 2. Ringing tone 3. Ringing volume 4. Vibrating alert 5. Message alert tone 6. Keypad tones 7. Warning tones 8. Alert for 6. Accessory settings1 1.
7. Security settings 1. PIN code request 2. Call barring service 3. Fixed dialling 4. Closed user group 5. Security level 6. Access codes 8. Restore factory settings 5. Organiser 1. Alarm clock 2. Calendar 3. To-do list 6. Notes 7. Radio 8. Gallery 1. View folders 1. Graphics 2. Tones 2. Add folder 3. Delete folder 4. Rename folder 5. Gallery downloads 1. Image downloads Copyright 2003 Nokia. All rights reserved.
2. Tone downloads 9. Games 1. Select game 2. Game downloads 3. Memory 4. Settings 1. Game sounds 2. Game lights 3. Shakes 10.Applications 1. Select application 2. App. downloads 3. Memory 11.Extras 1. Calculator 2. Wallet 1. Cards 2. Personal notes 3. Settings 3. Synchronisation 1. Synchronise 2. Settings 4. Countdown timer 5. Stopwatch Copyright 2003 Nokia. All rights reserved.
12.Connectivity 1. Infrared 2. GPRS 1. GPRS connection 2. GPRS modem settings 13.Services 1. Home 2. Bookmarks 3. Service inbox 4. Settings 1. Connection settings 2. Appearance settings 3. Security settings 4. Service inbox settings 5. Go to address 6. Clear the cache 14.SIM services1 1. Only shown if supported by your SIM card. The name and contents vary depending on the SIM card Copyright 2003 Nokia. All rights reserved.
7. Menu functions ■ Messages (Menu 1) Note: When sending messages via the SMS network service, your phone may display the words "Message sent". This is an indication that the message has been sent by your phone to the message centre number programmed into your phone. This is not an indication that the message has been received at the intended destination. For more details about SMS services, check with your service provider. You can read, write, send and save text, multimedia, and e-mail messages.
Note: Picture message function can be used only if it is supported by your network operator or service provider. Only phones that offer picture message features can receive and display picture messages. Writing and sending messages The number of available characters and the current part number of a multi-part message are shown on the top right of the display. 1. Press Menu and select Messages, Text messages and Create message.
• To send a message using a message profile, select Sending profile and then the desired message profile. For defining a message profile, see Message settings on page 86. Reading and replying to a message When you have received a message, the indicator and the number of new messages followed by message(s) received are shown. The blinking indicates that the message memory is full. Before you can receive new messages, delete some of your old messages.
Select Use detail to extract numbers, e-mail and website addresses from the current message. When viewing a picture message, select Save picture to save the picture in the Templates folder. 4. Select Reply to reply to a message. Select Original text to include the original message in the reply, or select a standard answer to be included in the reply, or select Empty screen. 5. Press Options, select Send, and press OK to send the message to the displayed number.
Inserting a text template into a message • When you are writing or replying to a message, press Options. Select Use template and select the template that you want to insert. Inserting a picture into a text message • When you are writing or replying to a message, press Options. Select Insert picture and select a picture to view it. Press Insert to insert the picture into your message. The indicator in the header of the message indicates that a picture has been attached.
Distribution lists You can save distibution lists in the phone’s memory, containing a fixed number of people to whom you regularly send messages. If the message fails to send, an Undelivered folder will appear containing a list of the recipient(s) who did not receive the message. 1. Press Menu, select Messages, Text messages and Distribution lists. 2. Press Add to create a new list. The option is shown, if you have not saved any lists in the folder. Or: Press Options and select Add list. 3.
The phone supports multimedia messages that are up to 45 kB in size. If the maximum size is exceeded, the phone may not be able to receive the message. Depending on the network, you may receive a text message that includes an Internet address where you can view the multimedia message. If the message contains a picture that is larger than the display area, the phone scales it down to fit the display area.
2. Key in a message, see Writing text on page 44. You can insert one picture in a multimedia message. To insert a picture, press Options and select Insert image. The list of available folders in the Gallery is shown. Open the desired folder, scroll to the desired picture, press Options and select Insert. The indicator on the header of the message indicates that a picture has been attached. To insert a name from contacts, press Options, select More options and Insert contact.
The messages that you have sent will be saved in the Sent items folder if the setting Save sent messages is set to Yes, see Settings for multimedia messages on page 88. Reading and replying to a multimedia message When your phone is receiving a multimedia message, the animated indicator is displayed. When the message has been received, the indicator and the text Multimedia message received are shown.
• Edit to edit a message. You can only edit messages you have written. See Writing and sending a multimedia message on page 74. • Message details to view the subject, size and class of the message. • Details to view the details of the attached image or sound • Play to listen to the ringing tone that is contained in the message. • Save sound clip to save a ringing tone in the Gallery. • Save image to save the picture in the Gallery.
message, press Options, select Save message and delete old messages by first selecting the folder and then the message to be deleted. To discard the waiting message, press Exit and Yes. If you press No, you can view the message. Deleting messages • To delete text messages, press Menu and select Messages, Text messages and Delete messages. To delete all text messages from all text message folders, select All messages and when Delete all messages from all folders? is displayed, press OK.
E-mail messages Writing and sending an e-mail Note: When sending e mails, your phone may display the words Message sent. This is an indication that the e-mail has been sent by your phone to the e-mail server. This is not an indication that the e-mail has been received at the intended destination. For more details about e-mail services, check with your service provider.
3. You can key in the subject for the e-mail if you want, then press Options and select Save. 4. Key in the e-mail message, see Writing text on page 44. The number of characters that you can key in is shown on the top right of the display. 5. To send the e-mail message, press Options and select Send e-mail. Select • Send now to send the e-mail immediately. If you have not already connected to the e-mail account, your phone establishes the connection first and then sends the e-mail.
2. Your phone makes a connection to the e-mail service. A status bar is shown, while your phone is downloading e-mail messages to your phone. 3. Press Select to view the new message in Inbox, or press Back to view it later. Reading the e-mail later: Press Menu and select Messages, E-mail, Open and Inbox. 4. If more than one message is received, select the message that you want to read. An unread text message is indicated by . Replying to an e-mail message 1.
• Deleted items for e-mails that have been deleted. • Sent items for saving e-mails that have been sent. • Drafts for saving unfinished e-mails. • Archive for organising and saving your e-mails. E-mail settings 1. Press Menu and select Messages, E-mail, Open and Settings. 2. Select Mailbox in use to view a list of mailboxes, then scroll to the one that you want to edit and select it. You have five mailboxes that you can use for the e-mail settings of your phone for saving and retrieving e-mail messages. 3.
• Use SMTP authorisation. If your e-mail service provider requires authentication for sending e-mails, set the setting to on. You must also define your SMTP user name and SMTP password. • SMTP user name. Key in the name that you have obtained from your email service provider to access your mailbox. • SMTP password. Key in the password that you want to use to access your mailbox. If you have not defined a password, you may be asked to define one when your phone connects to your e-mail account.
• Secure login APOP. Select On if your connection requires a secure login, otherwise leave it to Off. Contact your service provider if in doubt. This option is shown only, if you have selected POP3 as your mailbox type. • Retrieve mails. Select All if you want to retrieve all your e-mails at once or select User defined if you want to retrieve only some of them at a time. Options available for an e-mail application • Web access to restrict the application for accessing the network.
1. To start a chat, press Menu, select Messages and Chat. Key in or search in contacts for the phone number of the person with whom you want to chat and press OK. Another way to start a chat: When you have received a message, press Show to read it. To start a chat, press Options and select Chat. 2. Key in your nickname for the chat and press OK. 3. Write your chat message, see Writing text on page 44. 4. To send the message, press Options and select Send. 5.
• Listen to voice messages to call your voice mailbox at the phone number that you have saved in the Voice mailbox number menu. Each phone line may have its own voice mailbox number, see Line for outgoing calls on page 97. • Voice mailbox number to key in, search for or edit your voice mailbox number and press OK to save it. If supported by the network, the indicator will show new voice messages. Press Listen to call your voice mailbox number.
Settings for text messages 1. Press Menu and select Messages, Message settings,Text messages andSending profile. 2. If more than one message profile set is supported by your SIM card, select the set you want to change. • Select Message centre number to save the phone number of the message centre that is required for sending text messages. You will receive this number from your service provider. • Select Messages sent as to select the message type: Text, E-mail, Paging or Fax.
• Select Rename sending profile to change the name of the selected message profile. The message profile sets are only displayed if your SIM card supports more than one set. Overwrite settings When the text message memory is full, the phone cannot receive or send any new messages. However, you can set the phone to automatically replace old text messages in the Inbox and Sent items folders with the new ones.
• Connection settings. Define WAP connection settings for retrieving multimedia messages. Activate the set where you want to save the connection settings and then edit the settings. • Settings’ name. Key in a new name for the connection set and press OK. • Homepage. Key in the homepage address of the WAP service that you want to use, press for a dot, and press OK. • Session mode. Select Permanent or Temporary. • Data bearer . Select GPRS. • Bearer settings. Select the settings for the selected data bearer.
also visit Club Nokia’s website (www.club.nokia.com). Availability may vary by country. Font size setting To select the font size for reading and writing messages, press Menu and select Messages, Message settings, Other settings, and Font size. Service commands Press Menu and select Messages and Service commands. Key in and send service requests (also known as USSD commands), such as activation commands for network services, to your service provider.
Recent calls lists Press Menu and select Call register and then select • Missed calls to view the list of the last ten phone numbers from which somebody has tried to call you (network service). The number in front of the (name or) phone number indicates the amount of call attempts from that caller. Tip: When a note about missed calls is displayed, press List to access the list of phone numbers. Scroll to the number you would like to call back and press .
Press Menu and select Call register and then select • Call duration. Scroll to view the approximate duration of your incoming and outgoing calls in hours, minutes and seconds. The security code is required to clear the timers. Each phone line has its own call timers and the timers of the selected line are displayed. See Line for outgoing calls on page 97. • Call costs (network service).
• GPRS connection timer. Scroll to check the duration of the last GPRS connection or the total GPRS connection time. You can also clear the timers. The security code is required to clear the timers. ■ Profiles (Menu 3) Your phone has a group of profiles that allow you to personalise the tone settings of your phone and to activate a profile for different events and environments. Available profiles are General, Silent, Meeting, Outdoor, and Pager. Press Menu and select Profiles.
Tip: To quickly change the profile in standby mode • when the flip is closed, press the power key that you want to activate and press Select. , scroll to the profile • when the flip is open, press the profile key , scroll to the profile that you want to activate and press Select. ■ Settings (Menu 4) Time and date settings Clock Press Menu and select Settings, Time and date settings and Clock. Select Show clock (or Hide clock ) to show (or hide) the time on the top right of the display in standby mode.
Date Press Menu and select Settings, Time and date settings and Date. Select Show date (or Hide date) to show (or hide) the date on the display in standby mode. Select Set the date to adjust the date. You can also select the date format. Auto update of date and time Press Menu and select Settings, Time and date settings and Auto-update of date & time (network service). To set the phone to automatically update the time and date according to the current time zone, select On.
To set the divert setting to on, select Activate and then select the timeout after which the call is diverted, if this is available for the call divert option. To set the call divert to off, select Cancel. To check whether the call divert is activated or not, select Check status if this is available for the divert option. Several divert options may be active at the same time. To see the divert indicators in standby mode, see Essential indicators in standby mode on page 24.
Call waiting Press Menu and select Settings, Call settings and Call waiting. Select Activate and the network will notify you of an incoming call while you have a call in progress (network service). See Call waiting on page 41. Summary after call Press Menu and select Settings, Call settings and Summary after call. Select On and after each call the phone will briefly display the duration and cost (network service) of the call.
For more information on availability, contact your network operator or service provider. Tip: In standby mode, you can switch from one line to the other by pressing and holding . Phone settings Language Press Menu and select Settings, Phone settings and Language. Select the language for the display texts. If Automatic is selected, the phone selects the language according to the information on the SIM card. Memory status Press Menu, and select Settings, Phone settings and Memory status.
2. Key in the security code and press OK. The security keyguard code is the same as your security code, see Security settings on page 104. 3. Select On, if you want to activate the security keyguard. To activate the security keyguard, press Menu and , when the flip is closed. To deactivate the keyguard, press Unlock and OK, if the flip is open. If the flip is closed, press Unlock and , then key in the security code. Cell info display Press Menu and select Settings, Phone settings and Cell info display.
If you select Manual, you can select a network that has a roaming agreement with your home network operator. If No access is displayed, you must select another network. The phone stays in manual mode until the automatic mode is selected or another SIM card is inserted into the phone. Confirm SIM service actions See SIM services (Menu 14) on page 148. Help text activation To set the phone to show or not to show the help texts, press Menu and select Settings, Phone settings and Help text activation.
To select wallpaper 1. Press Menu and select Settings, Display settings and Wallpaper. 2. Select Change image to view the folder list in the Gallery menu. 3. Open the image folder and scroll to the desired image 4. To set the image as wallpaper, press Options and select Set as wallpaper Note that the wallpaper is not displayed when the phone activates the screen saver. To activate or deactivate the wallpaper Press Menu and select Settings, Display settings and Wallpaper.
Screen saver A digital clock screen saver is used for power saving in standby mode. It is activated when no function of the phone has been used for a certain time while the phone’s flip is closed. Press any key to deactivate the screen saver or open the flip. The screen saver is also deactivated when the phone is out of the network coverage area. Press Menu and select Settings, Display settings and Screen saver timeout. Select the timeout after which the screen saver will be activated.
Select Ringing tone for incoming voice calls. To select ringing tones that have been saved in the Gallery, select Open gallery from the ringing tone list. Select Ringing volume and Vibrating alert for incoming voice calls and incoming messages. The vibrating alert does not work when the phone is connected to a charger, a desktop stand, or a car kit. Tip: If you donwload a ringing tone or receive one via OTA, you can save it in the Gallery.
• Select Default profile to select the profile that you want to be automatically activated when you connect to the selected accessory. You can select another profile while the accessory is connected. • Select Automatic answer to set the phone to automaticallt answer an incoming call after five seconds. If the Incoming call alert is set to Beep once or Off, automatic answer will not be used. • Select Lights to set the lights permanently to On.
When the fixed dialling is on, GPRS connections are not possible except while sending text messages over a GPRS connection. In this case, the recipient’s phone number and the message centre number must be included in the fixed dialling list. • Closed user group. Closed user group is a network service that specifies the group of people whom you can call and who can call you. For more information contact your network operator or service provider. • Security level.
■ Organiser (Menu 5) Alarm clock The alarm clock uses the time format that has been set for the clock. The alarm clock works even when the phone is switched off. Press Menu and select Organiser and Alarm clock. • Select Alarm time, key in the alarm time and press OK. To change the alarm time, select On. • Select Alarm tone and you can select a default alarm tone, personalise your alarm tone by selecting one from a ringing tone list or from the gallery, or set the radio as your alarm tone.
Note: Do not press Yes when wireless phone use is prohibited or when it may cause interference or danger. Calendar The calendar helps you to keep track of reminders, calls that you need to make, meetings, and birthdays. The calendar uses shared memory, see Shared memory on page 19. Press Menu and select Organiser and Calendar. Tip: To quickly view the current Calendar month, move the joystick to the right in standby mode. Scroll to the day you want. The current day is indicated by a frame around the day.
notes after a specified time. However, the repeated notes, for example birthday notes, will not be deleted. Making a calendar note For keying in letters and numbers, see Writing text on page 44. Press Menu and select Organiser and Calendar or move the joystick to the right in standby mode to go to the monthly view. Scroll to the date that you want, press Options and select Make a note.
To set the alarm for the note, select With tone or Silent (no alarm tone) and then set the alarm time. • Reminder - Key in the subject for the reminder, press Options and select Save (or search for the name in contacts and press OK). To set the alarm for the note, select Alarm on and then set the alarm time. When you have set the alarm, the indicator notes. is displayed when you view the When the phone sounds an alarm for a note The phone beeps, and displays the note.
High, Medium or Low. The phone automatically sets the time of expiry without an alarm for the note. For Dictionary, see Setting predictive text input on or off on page 46. • You can also view and delete the selected note and delete all the notes that you have marked as completed. You can sort the notes by priority, send them to another phone, save them as a calendar note, or access the calendar.
You can insert the current time and date to the note. If there is not enough space to insert them to the note, the phone will ask you to delete the appropriate number of characters from your note. You can also send the note via IR, MMS, or as a text message (SMS). If the note is too long to be sent as a text message, the phone will ask you to delete the appropiate number of characters from your note. The other options for notes include options for viewing, deleting, and editing a note.
• The frequency of the radio channel. 2. If you have pre-saved radio channels, you can scroll to the channel that you would like to listen to, or select a radio channel location from 1 to 9 by pressing the corresponding number key. When using the headset HDB-4 or HDS-3, press the headset key to scroll to the desired saved radio channel that you have saved. 3. When the radio is on, press Options and select Switch off to turn off the radio. Tip: To return to standby mode, press radio, press and hold .
Using the radio When the radio is on, press Options and select • Switch off to turn off the radio. • Save channel to save the radio channel that you have found, refer to Tuning a radio channel above. Up to 20 radio channels can be saved. • Automatic tuning. Move the joystick up or down to start searching upwards or downwards for channels. The search stops when a channel has been found, press OK. To save the channel, see Save channel above. • Manual tuning.
• Loudspeaker (or Headset) to listen to the radio through a loudspeaker (or headset). Keep the headset connected to the phone, because the lead of the headset functions as the radio antenna. Note that if you receive an incoming call, it is always routed to the headset. • Mono output (or Stereo output) to listen to the radio in mono (or in stereo). You can make a call or answer an incoming call while listening to the radio, the radio is muted.
Other available options are: • Add folder to add a new folder. Key in a name for the folder and press OK. • Delete folder to select a folder you want to delete. You cannot delete the folders that were originally on the phone. • Rename folder to select a folder you want to rename. You cannot rename the folders that were originally on the phone. • Gallery downloads to download more images and tones. Select Image downloads or Tone downloads. The list of available WAP bookmarks is shown.
• Delete to delete the selected file. • Move to move a file to another folder. • Rename to give a new name to the file. • Set as wallpaper to set the selected file as wallpaper. • Set as ring tone to set the selected file as the ringing tone. • Details to see the details of the file, for example, the size of the file. • Sort to sort the files and folders by date, type, name or size. ■ Games (Menu 9) Note: Your phone must be switched on to use this function.
Note that running some games may consume the phone’s battery faster (and you may need to connect the phone to the charger). Other options available for a game or game set For Options for games, see Other options available for an application or application set on page 119. Game downloads Press Menu and select Games and Game downloads. The list of available WAP bookmarks is shown. Select More bookmarks to access the list of WAP bookmarks in the Services menu, see Bookmarks on page 142.
Memory status for games To view the amount of memory available for game and application installations, press Menu and select Games and Memory. See also Memory status for applications on page 121. The games use shared memory, see Shared memory on page 19. Game settings Press Menu and select Games and Settings to set sounds, lights and shakes for the game. ■ Applications (Menu 10) Note: The phone must be switched on to use this function.
Launching an application 1. Press Menu and select Applications and Select application. 2. Scroll to an application or an application set (the name depends on the application). 3. Press Options and select Open or press application, it will be launched. . If the selection is a single Otherwise, a list of applications in the selected application set is displayed.
• Web page to provide further information or additional data for the application from an Internet page. This is a network service and the menu is shown only if an Internet address has been provided with the application. • Details to give additional information about the application. Downloading an application You can download new Java applications in different ways: • Press Menu and select Applications and App. downloads and the list of available WAP bookmarks is shown.
Note that Nokia does not warrant for applications from non-Nokia sites. If you choose to download Java applications from them, you should take the same precautions, for security or content, as you would with any site. Note that when downloading a game or an application, it may be saved in the Games menu instead of the Applications menu. Memory status for applications To view the amount of memory available for game and application installations, press Menu and select Applications and Memory.
2. When ’0’ is displayed on the screen, key in the first number of the calculation, press for a decimal point or the corresponding symbol on the keyboard, if the flip is open. 3. Press Options and select Add, Subtract, Multiply, Divide, Square, Square root or Change sign. If the flip is open, you can also use the corresponding calculation symbols of the keyboard, if available.
You can also perform the currency conversion in standby mode. Key in the amount to be converted, press Options and select In domestic or In foreign. Wallet In Wallet you can save personal information, such as credit card numbers and make purchases using your phone. You can access wallet via the Wallet menu or via the WAP browser, see Options while browsing on page 139. When you access the wallet for the first time, you need to create your own wallet code.
• Shipping info to save your contact information. • Billing info to save the contact information in case the invoicing address differs from your own, for example with company credit cards. • Receipt info to save phone numbers and e-mail addresses to which you want the service provider to send a receipt of your purchase. • To make a copy of the card, press Options and select Copy card. • To delete all the information on the card, press Options and select Clear card.
Guidelines for paying for your purchases with wallet 1. Access the desired WAP site to do shoppings, see Connecting to a WAP service on page 138, and choose the product you want to buy. 2. To pay for your purchases, press Options and select Use wallet info, see Options while browsing on page 139. 3. Select the card with which you want to pay. Fill in the data form you receive from the service provider by transferring the credit card details from the wallet.
Note that answering an incoming call during synchronisation will end the synchronisation process and you will need to start it again. Synchronising from your phone Before synchronising from your phone, you may need to do the following: • Subscribe to a synchronisation service. For more information on availability and the synchronisation service settings, contact your network operator or service provider. • Obtain the synchronisation settings from your network operator or service provider.
4. The marked data in the active set will be synchronised after confirmation. Note that synchronising for the first time may take time up to 30 minutes, if contacts or calendar are full. Saving the synchronisation settings received as a text message When you receive the synchronisation settings as a text message, Synchronisation settings received is displayed. Press Options and select Details to view the received settings first, Save to save the synchronisation settings, or Discard to discard them.
• User name. Key in the user name and press OK. • Password. Key in the password and press OK. • Synchronisation server. Key in the name of the server and press OK. Synchronising from your PC To synchronise contacts and calendar from your PC, use either an IR connection or a data cable. You will also need the PC Suite software of your phone installed on your PC. Start the synchronisation from your PC using PC suite. After synchronising, the data on the phone and on the PC are the same.
Stopwatch You can measure time, record intermediate times or lap times using the stopwatch. During timing, the other functions of the phone can be used. To set the stopwatch to run in the background, press . Note: Using the stopwatch consumes the battery and the phone’s operating time will be reduced. Be careful not to let it run in the background when performing other operations with your phone. Timing and split timing 1. Press Menu, select Extras, Stopwatch and Split timing.
Lap timing Press Menu, select Extras, Stopwatch and Lap timing. Press Start to start timing and Lap to record a lap time. Press Stop to stop the lap timing. Press Options and you can save or reset the lap times. Refer to Timing and split timing above. Viewing and deleting times Press Menu, select Extras, and Stopwatch. If the stopwatch has not been reset, you can select Show last to view the most recent measured time.
Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. Sending and receiving data via IR • Ensure that the IR ports of the sending and receiving devices are pointing at each other and that there are no obstructions between the devices. The preferable distance between the two devices in an infrared connection should be one meter at most.
GPRS GPRS connection You can set the phone to automatically register to a GPRS network when you switch the phone on. Press Menu and select Connectivity, GPRS, GPRS connection and Always online. When you start an application using GPRS, the connection between the phone and the network is established, and data transfer is possible. When you end the application, the GPRS connection ends but the registration with the GPRS network remains.
• Scroll to Alias for access point and press Select. Key in the name that you would like for the activated access point and press OK. • Scroll to GPRS access point and press Select. Key in the Access Point Name (APN) and press OK. An access point name is needed to establish a connection to a GPRS network. You can obtain the Access Point Name from your network operator or service provider.
The WAP services use Wireless Mark-Up Language (WML) on their WAP pages. Internet web pages cannot be viewed on your phone. Basic steps for accessing and using WAP services 1. Save the service settings that are required to access the WAP service that you want to use. See page 134. 2. Make a connection to the given WAP service. See page 138. 3. Start browsing the pages of the WAP service. See page 139. 4. Once you are finished browsing, end the connection to the WAP service. See page 141.
• To save the received settings, press Options and select Save. If no settings are saved in Active service settings, the settings are saved in the first free connection set and are also activated. If there are settings saved in Active service settings, Activate saved service settings? will be displayed. To activate the saved settings, press Yes, or to save them only, press No. • To discard the received settings, press Options and select Discard.
• Connection security - Select On or Off. When the connection security is On, the phone tries to use a secure connection with the WAP service. If a secure connection is not available, the connection will not be made. If you wish to connect anyway, with a non-secure connection, you must set the connection security to Off. • Data bearer - Select GMS data or GPRS.
• User name - Key in the user name and press OK. • Password - Key in the password and press OK. • Display terminal window - Select Yes, if you want the server to perform user authentication when you access intranet sites during a dial-up connection. Settings when GPRS is the selected data bearer • GPRS access point - Key in the access point name and press OK. An access point name is needed to establish a connection to a GPRS network.
Connecting to a WAP service Firstly, make sure that the service settings of the WAP service that you want to use have been activated. To activate the settings: • Press Menu and select Services, Settings and Connection settings. Select Active service settings and scroll to the set you want to activate and press Activate. Secondly, make a connection to the WAP service. There are three ways to connect: • Open the homepage of the WAP service: Press Menu and select Services and Home.
Note that it is not necessary to add the prefix http:// in front of the address since it will be added automatically. Browsing the pages of a WAP service After you have made a connection to the WAP service, you can start browsing its WAP pages. The function of the phone keys may vary in different WAP services. Follow the text guides on the phone display. For more information, contact your WAP service provider.
• Home to return to the homepage of the WAP service. • Bookmarks. See page 142. • Call, Edit, Open row, Open, Open list to call, to key in text or to select a highlighted item on the WAP page. • Add bookmark to save the WAP page as a bookmark. • View image or View images to view images and animations from the WAP page. • Go to address to key in the address of the WAP service you want to access. • Service inbox. See page 143. • Use wallet info and Close wallet.
Direct calling The WAP browser supports functions that you can access while browsing. You can make a voice call, send DTMF tones while a voice call is in progress, and save a name and a phone number from a WAP page in contacts. Ending a WAP connection To quit browsing and to end the connection, press Options and select Quit. When Quit browsing? is shown, press Yes. Alternatively, press . If GSM data is the selected data bearer, press The phone ends the connection to the WAP service. twice.
Bookmarks You can save WAP addresses as bookmarks in the phone’s memory. 1. While browsing, press Options and select Bookmarks, or in standby mode, press Menu and select Services and Bookmarks. 2. Scroll to the bookmark you want to use and press Options. 3. Select one of the following options: Go to to make a connection to the WAP page associated with the bookmark. View, Edit or Delete to view, modify or delete the selected bookmark.
Service inbox The phone is able to receive service messages (pushed messages) sent by your service provider. Service messages are notifications of, for example news headlines, and they may contain a text message or an address of a WAP service. To access the Service inbox in standby mode, when you have received a service message, press View. • If you press Exit the message is moved to the Service inbox. To access the Service inbox later, press Menu and select Services and Service inbox.
The cache memory Note: The information or services you have accessed are stored in the cache of your phone. A cache is a buffer memory, which is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords (for example, your bank account), empty the cache of your phone after each use. To empty the cache, • while browsing, press Options and select Clear the cache, or • in standby mode, press Menu and select Services and Clear the cache.
• Module PIN request to set the phone to ask for the module PIN when using services provided by the security module. Key in the code and select On. To disable the module PIN request, select Off. • Change module PIN to change the module PIN, if allowed by the security module. Key in the current module PIN code, then key in the new code twice. • Change signing PIN to view a list of signing PINs. Select the signing PIN that you want to change. Key in the current PIN code, then key in the new code twice.
The security indicator is displayed during a WAP connection, if the data transmission between the phone and the WAP gateway or WAP server (identified by the IP address in the Edit active service settings) is encrypted. However, the security indicator is not an indication that the data transmission between the gateway and the content server (place where the requested resource is saved) is secure. It is up to the service provider to secure the data transmission between the gateway and the content server.
Digital signature You can create digital signatures with your phone. The signature can be traced back to you via the private keyin the security module and the user certificate that was used to create the signature. Using the digital signature may be considered to be equal to a normal signature on any legal document. To create a digital signature, select a link on a WAP page, for example the title of the book you want to buy and its price.
A cookie is data that a WAP site saves in your phone’s browser cache memory. The data can be, for example, your user information or your browsing preferences. Cookies will be saved until you clear the cache memory, see The cache memory on page 144. 1. While browsing, press Options and select Cookies, or in standby mode, press Menu and select Services, Settings and Security settings. 2. Select Cookies and select Allow or Reject to allow or prevent the phone receiving cookies.
8. PC Connectivity You can access the Internet when your phone is connected to a compatible PC via an IR connection or a data cable. You can use your phone with a variety of PC connectivity and data communications applications. With PC Suite you can, for example send text and picture messages, synchronise contacts, calendar, to-do notes and notes between your phone and the PC, and manage your WAP bookmarks and connection settings.
• Nokia PC WAP Manager to edit and send your WAP bookmarks or update the connection sets on your phone. • Nokia Phone Editor to send text messages (SMS) and edit contacts, and message settings of your phone. • Nokia Phone Browser to browse and modify picture and audio files in the phone’s memory and to transfer them between phone and PC. • Nokia PC Sync to synchronise contacts, calendar and to-do notes between your phone and your PC. • Nokia 6800 data modem drivers enable you to use your phone as a modem.
■ Using data communications applications For information on using a data communications application, refer to the documentation provided with it. 1. If you use an IR connection: • Activate the IR connection in the phone, see Infrared on page 130. Make sure that the connection is active on your PC. If you use the cable DKU-5: • Connect the cable to the USB port on your computer and to the connector on your phone. 2. Start using the data communications application on the computer.
9. Battery information ■ Charging and Discharging Your phone is powered by a rechargeable battery. Note that a new battery’s full performance is achieved only after two or three complete charge and discharge cycles! The battery can be charged and discharged hundreds of times but it will eventually wear out. When the operating time (talk-time and standby time) is noticeably shorter than normal, it is time to buy a new battery.
temporarily not work, even when the battery is fully charged. Batteries’ performance is particularly limited in temperatures well below freezing. Do not dispose of batteries in a fire ! Dispose of batteries according to local regulations (e.g. recycling). Do not dispose as household waste. Copyright 2003 Nokia. All rights reserved.
CARE AND MAINTENANCE Your phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you to fulfil any warranty obligations and to enjoy this product for many years. • Keep the phone and all its parts and accessories out of the reach of small children. • Keep the phone dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. • Do not use or store the phone in dusty, dirty areas.
IMPORTANT SAFETY INFORMATION ■ Traffic Safety Do not use a hand-held telephone while driving a vehicle. Always secure the phone in its holder; do not place the phone on the passenger seat or where it can break loose in a collision or sudden stop. Remember road safety always comes first! ■ Operating environment Remember to follow any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger.
Pacemakers Pacemaker manufacturers recommend that a minimum separation of 20 cm (6 inches) be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research.
Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (e.g. electronic fuel injection systems, electronic anti-skid (anti-lock) braking systems, electronic speed control systems, air-bag systems). Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.
■ Vehicles Only qualified personnel should service the phone, or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty which may apply to the unit. Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts or accessories.
To make an emergency call: 1. If the phone is not on, switch it on. Check for adequate signal strength. Some networks may require that a valid SIM card is properly inserted in the phone. 2. Press as many times as needed (e.g. to exit a call, to exit a menu, etc.) to clear the display and ready the phone for calls. 3. Key in the emergency number for your present location (e.g. 112 or other official emergency number). Emergency numbers vary by location. 4.
European Union is 2.0 W/kg.* Tests for SAR have been conducted using standard operating positions with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network.
Index INDEX A accented characters 45 access codes. See also PIN code, PIN2 code, PUK code, PUK2 code, security code accessories settings 103 alarm clock 106 B background picture.
own number display 97 redialling, automatic 96 selecting a phone line 97 setting call symmary after a call 97 speed dialling 96 caller groups adding a contact 57 naming a group 57 removing a contact 57 selecting a ringing tone 57 setting the group logo 57 calling.
Index sending/receiving data via IR 131 contacts adding/saving names and phone numbers 51 arranging contacts to caller groups 57 checking the memory in use/status 50, 51 copying names and numbers from SIM/phone memory 54 editing names/numbers 53 erasing names/numbers 54 receiving names/numbers as a business card 55 saving multiple numbers/ text items per name 51 searching a name 53 sending names/numbers as a business card 55 speed dialling 39 synchronising 126 viewing own numbers 57 costs call costs 91 co
flip activating the l oudspeaker 42 opening 33 opening to unlock the keypad lock 36 folders adding new 72 archiving messages 72, 81 deleted items 81 deleting 78 deleting all messages from a folder 78 drafts 81 for e-mails 81 for multimedia messages 77 in the Gallery menu 114 inbox e-mails 81 multimedia messages 77 text messages 71 outbox e-mails 81 multimedia messages 77 text messages 71 saved items for sending multimedia messages later 77 sent items 81 font size selecting 90 G gallery (the Gallery menu)
joystick 21 left and right selection key 20 of the messaging keyboard 22 power key 20, 23, 31 profile key 22 speed dialling 39 volume keys 20 when flip closed 20, 21 when flip open 22, 23, 31 backspace key 22 character key 23 enter key 22 keyboard lights 22 shift keys 23 space bars 23 J Java (the Applications menu) 120 checking the memory 121 downloading a pplications 120 starting an application 119 K keyboard keys 22 light key 22 switching on or off 36 writing text 44 keyguard.
adjusting volume 20 connecting a carkit/ headset 42 M memory checking GPRS data size 92 checking status 50, 51 checking the memory available for Java applications 121 copying names and numbers to SIM /phone 54 of the phone 50, 51 of the SIM card 50, 51 shared 19 menu accessing by scrolling 58 shortcut 58 list of functions 60 using the menu 58 messages concatenated 68 deleting all folders 78 deleting all from a folder 78 deleting text messages 70 e-mail downloading from your account 80 reading 80 replying
missed calls own number display 97 received calls restricting calls to a limited user group 105 voice mailbox 85 notepad writing a calendar note 108 O N network selecting manually/ automatically 99 network services automatic update of date and time 95 barring a call 104 call costs 91 call summary 97 call waiting 97 concatenated messages 68 diverting/forwarding a call 95 info messages 86 line for outgoing calls 97 Index text input 46 writing with the keyboard 44 writing with traditional text input 47 wri
predictive text input setting on or off 46 writing compound words 47 profile key 22 profiles activating 93 personalising 93 PUK and PUK2 codes 14 R radio listening through a loudspeaker 114 saving/deleting a channel 113 setting the frequency 113 tuning a channel 112 tuning, automatic 113 tuning, manual 113 received messages inbox 71, 77, 81 S safety instructions 11 screen saver 102 security code 14 changing 105 locking the keys 98 security keyguard.
Index SIM card copying memory 54 installing 28 SMS messages.
setting all by selecting a profile 93 setting an alert for a certain caller group 102 V voice mailbox 39 listening to messages 85 mailbox number 85 messages 85 volume using volume keys 20 W wallet creating wallet code 123 paying purchases 125 signing documents via WAP 147 wallet code 15, 123 wallpaper 24, 100 activating/deactivating 101 selecting a picture 100 WAP services connecting to a WAP site 138 downloading wallpaper pictures 100 saving bookmarks 142 security module in SIM 144 service settings GPRS
Index letters 23, 44 using the keyboad 44 with predictive text input 46 with traditional text input 47 Copyright 2003 Nokia. All rights reserved.
3310_en.qxd 12.12.2001 12:35 Page 1 LIMITED MANUFACTURER’S WARRANTY PART OF EUROPE & AFRICA REGION This limited warranty shall apply in part of Nokia Mobile Phones’ Europe & Africa Region unless a local warranty exists. Nokia Corporation, Nokia Mobile Phones (”Nokia”) warrants that this NOKIA product (”Product”) is at the time of its original purchase free of defects in materials, design and workmanship subject to the following terms and conditions: 1.
/ Page 2 / 12.12.2001 12:35 Date of Purchase (dd/mm/yy): / / Product Type (on phone type label under battery): Product Model (on phone type label under battery): Phone Serial No (on phone type label under battery): 3310_en.
