User guide

E Copyright Nokia Networks Oy

C33874002SE_A0

3 Configuring M5122

Your service provider has configured your M5122 for the service. Do

not change settings unless specifically asked by your service

provider. You can change M5122 settings with an ordinary web

browser, such as Microsoft Internet Explorer or Netscape Navigator.

Use a PC connected to an ETH port of M5122 for configuration. In this

case the corresponding ETH indicator should be lit.

3.1 Browser management

The web configuration pages of M5122 can be accessed through the

Ethernet and through the ADSL/ATM channels of M5122. In order to

access the web management feature, the IP functionality must be

activated and an IP address must be given to the corresponding

interface.

You can use your PC’s web browser software to access the web

configuration pages in M5122. To access the web pages you must

know the IP address of your M5122 or, alternatively, the “name” that

your M5122 recognises.

Note

Before using your web browser for configuration, you must know the

IP address or the name assigned to your M5122.

There are three ways to find out whether to use a name or an IP address:

D Your service provider has given you an IP address for M5122.

D Your M5122 uses Dynamic Host Configuration Protocol (DHCP)

and Domain Name Server. In this case the name is M5122.

D Your M5122 uses DHCP. In this case run winipcfg.exe (Windows

95) or ipconfig.exe (Windows NT). The IP address of M5122 is the

Default Gateway address shown by the ipconfig program.

3.1.1 Opening a connection

To open a connection to the Nokia M5122:

1. Start your web browser.