Product Guide
Table Of Contents
- Beacon 2 Product Guide
- Legal notice
- Contents
- List of tables
- List of figures
- About this document
- 1 What’s new
- 2 ANSI CPE safety guidelines
- 3 ETSI CPE safety guidelines
- 4 ETSI environmental and CRoHS guidelines
- 5 Beacon 2 unit data sheet
- 5.1 Overview
- 5.2 Beacon 2 part numbers and identification
- 5.3 Beacon 2 general description
- 5.4 Beacon 2 software and installation feature support
- 5.5 Beacon 2 interfaces and interface capacity
- 5.6 Beacon 2 LEDs
- 5.7 Beacon 2 detailed specifications
- 5.8 Beacon 2 functional blocks
- 5.9 Beacon 2 responsible party
- 5.10 Beacon 2 special considerations
- 6 Install a Beacon 2
- 7 Replace a Beacon 2
- 8 Configure a Beacon 2
2. When Encryption Mode is set to “WPA/WPA2 Enterprise”, the following options become
available: Primary RADIUS server, port and password; Secondary RADIUS server, port, and
password; RADIUS accounting port.
4
If you have enabled and configured WPS, click WPS CONNECT.
Result: The WPS success message displays near the WPS CONNECT button.
5
Click SAVE.
You can click the Refresh icon
to update displayed information.
END OF STEPS
8.32 Configuring IP Routing
1
Click Network in the menu bar.
2
Click IP Routing in the left pane. The IP Routing page displays.
Configure a Beacon 2
Configuring the network
Configuring IP Routing
WiFi Beacon 2
December 2020
Issue 1 101
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49294-AAAA-TCZZA