Product Guide
Table Of Contents
- Beacon 2 Product Guide
- Legal notice
- Contents
- List of tables
- List of figures
- About this document
- 1 What’s new
- 2 ANSI CPE safety guidelines
- 3 ETSI CPE safety guidelines
- 4 ETSI environmental and CRoHS guidelines
- 5 Beacon 2 unit data sheet
- 5.1 Overview
- 5.2 Beacon 2 part numbers and identification
- 5.3 Beacon 2 general description
- 5.4 Beacon 2 software and installation feature support
- 5.5 Beacon 2 interfaces and interface capacity
- 5.6 Beacon 2 LEDs
- 5.7 Beacon 2 detailed specifications
- 5.8 Beacon 2 functional blocks
- 5.9 Beacon 2 responsible party
- 5.10 Beacon 2 special considerations
- 6 Install a Beacon 2
- 7 Replace a Beacon 2
- 8 Configure a Beacon 2
3
Configure the following parameters:
Table 8-22 IP Routing parameters
Field Description
Enable Routing Select this checkbox to enable static routing.
Destination IP Address Enter the destination IP address.
Destination Netmask Enter the destination network mask.
Gateway Enter the gateway address.
IPv4 Interface Select a WAN connection previously created in the WAN page from the list.
4
Click ADD.
You can click the Delete icon
in the IP Routing Table to delete routing information.
Figure 8-27 IP Routing page
Configure a Beacon 2
Configuring the network
Configuring IP Routing
WiFi Beacon 2
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49294-AAAA-TCZZA
December 2020
102 Issue 1