Product Guide
Table Of Contents
- Beacon 2 Product Guide
- Legal notice
- Contents
- List of tables
- List of figures
- About this document
- 1 What’s new
- 2 ANSI CPE safety guidelines
- 3 ETSI CPE safety guidelines
- 4 ETSI environmental and CRoHS guidelines
- 5 Beacon 2 unit data sheet
- 5.1 Overview
- 5.2 Beacon 2 part numbers and identification
- 5.3 Beacon 2 general description
- 5.4 Beacon 2 software and installation feature support
- 5.5 Beacon 2 interfaces and interface capacity
- 5.6 Beacon 2 LEDs
- 5.7 Beacon 2 detailed specifications
- 5.8 Beacon 2 functional blocks
- 5.9 Beacon 2 responsible party
- 5.10 Beacon 2 special considerations
- 6 Install a Beacon 2
- 7 Replace a Beacon 2
- 8 Configure a Beacon 2
Table 8-23 DNS parameters (continued)
Field Description
Domain Name
IPv4 Address
Enter the domain name and domain IP address and click ADD.
Origin Domain
New Domain
Enter the origin domain name and new domain name and click ADD.
4
Click ADD to add the particular DNS.
You can click the Delete icon
to delete a particular domain.
END OF STEPS
8.34 Configuring TR-069
1
Click Network in the menu bar.
2
Click TR-069 in the left pane. The TR-069 page displays.
Figure 8-29 TR-069 page
Configure a Beacon 2
Configuring the network
Configuring TR-069
WiFi Beacon 2
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49294-AAAA-TCZZA
December 2020
104 Issue 1