Product Guide
Table Of Contents
- Beacon 2 Product Guide
- Legal notice
- Contents
- List of tables
- List of figures
- About this document
- 1 What’s new
- 2 ANSI CPE safety guidelines
- 3 ETSI CPE safety guidelines
- 4 ETSI environmental and CRoHS guidelines
- 5 Beacon 2 unit data sheet
- 5.1 Overview
- 5.2 Beacon 2 part numbers and identification
- 5.3 Beacon 2 general description
- 5.4 Beacon 2 software and installation feature support
- 5.5 Beacon 2 interfaces and interface capacity
- 5.6 Beacon 2 LEDs
- 5.7 Beacon 2 detailed specifications
- 5.8 Beacon 2 functional blocks
- 5.9 Beacon 2 responsible party
- 5.10 Beacon 2 special considerations
- 6 Install a Beacon 2
- 7 Replace a Beacon 2
- 8 Configure a Beacon 2
3
Configure the following parameters:
Table 8-24 TR-069 network parameters
Field Description
Periodic Inform Enable Select this checkbox to enable periodic inform updates.
Periodic Inform Interval(s) Enter the time between periodic inform updates, in seconds.
URL Enter the URL of the auto-configuration server.
Username Enter the username used to log in to the Beacon 2.
Password Enter the password used to log in to the Beacon 2.
Connect Request Username Enter the username used to log in to the auto-configuration server.
Connect Request Password Enter the password used to log in to the auto-configuration server.
4
Click SAVE.
You can click the Refresh icon
to update displayed information.
END OF STEPS
8.35 Configuring Mesh
1
Click Network in the menu bar.
2
Click MESH in the left pane. The MESH page displays.
Configure a Beacon 2
Configuring the network
Configuring Mesh
WiFi Beacon 2
December 2020
Issue 1 105
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49294-AAAA-TCZZA