Product Guide
Table Of Contents
- Beacon 2 Product Guide
- Legal notice
- Contents
- List of tables
- List of figures
- About this document
- 1 What’s new
- 2 ANSI CPE safety guidelines
- 3 ETSI CPE safety guidelines
- 4 ETSI environmental and CRoHS guidelines
- 5 Beacon 2 unit data sheet
- 5.1 Overview
- 5.2 Beacon 2 part numbers and identification
- 5.3 Beacon 2 general description
- 5.4 Beacon 2 software and installation feature support
- 5.5 Beacon 2 interfaces and interface capacity
- 5.6 Beacon 2 LEDs
- 5.7 Beacon 2 detailed specifications
- 5.8 Beacon 2 functional blocks
- 5.9 Beacon 2 responsible party
- 5.10 Beacon 2 special considerations
- 6 Install a Beacon 2
- 7 Replace a Beacon 2
- 8 Configure a Beacon 2
Products containing hazardous substances above Maximum Concentration Value (MCV)
label
Figure 4-2, “Products above MCV value label” (p. 27) shows the label that indicates a product is
above the maximum concentration value, as defined by standard SJ/T11363-2006 (Requirements
for Concentration Limits for Certain Hazardous Substances in Electronic Information Products). The
number contained inside the label indicates the Environment-Friendly User Period (EFUP) value.
The label may be found in this documentation or on the product.
Together with major international telecommunications equipment companies, Nokia has determined
it is appropriate to use an EFUP of 50 years for network infrastructure equipment and an EFUP of
20 years for handsets and accessories. These values are based on manufacturers' extensive
practical experience of the design, manufacturing, maintenance, usage conditions, operating
environments, and physical condition of infrastructure and handsets after years of service. The
values reflect minimum values and refer to products operated according to the intended use
conditions. See
4.2 “Hazardous Substances Table (HST)” (p. 28) for more information.
4.2 Hazardous Substances Table (HST)
This section describes the compliance of the OLT and CPE to the CRoHS standard when the
product and subassemblies contain hazardous substances beyond the MCV value. This information
is found in this user documentation where part numbers for the product and subassemblies are
listed. It may be referenced in other OLT and CPE documentation.
In accordance with the People’s Republic of China Electronic Industry Standard Marking for the
Control of Pollution Caused by Electronic Information Products (SJ/T11364-2006), customers may
access the Nokia Hazardous Substance Table, in Chinese, from the following location:
•
http://www.alcatel-sbell.com.cn/wwwroot/images/upload/private/1/media/ChinaRoHS.pdf
Figure 4-2 Products above MCV value label
18985
ETSI environmental and CRoHS guidelines
Hazardous Substances Table (HST)
WiFi Beacon 2
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49294-AAAA-TCZZA
December 2020
28 Issue 1