Product Guide
Table Of Contents
- Beacon 2 Product Guide
- Legal notice
- Contents
- List of tables
- List of figures
- About this document
- 1 What’s new
- 2 ANSI CPE safety guidelines
- 3 ETSI CPE safety guidelines
- 4 ETSI environmental and CRoHS guidelines
- 5 Beacon 2 unit data sheet
- 5.1 Overview
- 5.2 Beacon 2 part numbers and identification
- 5.3 Beacon 2 general description
- 5.4 Beacon 2 software and installation feature support
- 5.5 Beacon 2 interfaces and interface capacity
- 5.6 Beacon 2 LEDs
- 5.7 Beacon 2 detailed specifications
- 5.8 Beacon 2 functional blocks
- 5.9 Beacon 2 responsible party
- 5.10 Beacon 2 special considerations
- 6 Install a Beacon 2
- 7 Replace a Beacon 2
- 8 Configure a Beacon 2
7 Replace a Beacon 2
7.1 Overview
7.1.1 Purpose
7.1.2 Contents
7.1 Overview 47
7.2 Purpose 47
7.3 General 47
7.4 Prerequisites 47
7.5 Recommended tools 47
7.6 Safety information 47
7.7 Procedure 48
7.2 Purpose
This chapter provides the steps to replace a Beacon 2.
7.3 General
The steps listed in this chapter describe mounting and cabling for a Beacon 2.
7.4 Prerequisites
You need the following items before beginning the installation:
• One Ethernet cable (included with the device)
• AC power jack
• Access to the broadband network (Internet)
7.5 Recommended tools
You need the following tools for replacing the Beacon 2:
• Paper clip
7.6 Safety information
Read the following safety information before replacing the unit.
Replace a Beacon 2
Overview
WiFi Beacon 2
December 2020
Issue 1 47
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49294-AAAA-TCZZA