Product Guide
Table Of Contents
- Beacon 2 Product Guide
- Legal notice
- Contents
- List of tables
- List of figures
- About this document
- 1 What’s new
- 2 ANSI CPE safety guidelines
- 3 ETSI CPE safety guidelines
- 4 ETSI environmental and CRoHS guidelines
- 5 Beacon 2 unit data sheet
- 5.1 Overview
- 5.2 Beacon 2 part numbers and identification
- 5.3 Beacon 2 general description
- 5.4 Beacon 2 software and installation feature support
- 5.5 Beacon 2 interfaces and interface capacity
- 5.6 Beacon 2 LEDs
- 5.7 Beacon 2 detailed specifications
- 5.8 Beacon 2 functional blocks
- 5.9 Beacon 2 responsible party
- 5.10 Beacon 2 special considerations
- 6 Install a Beacon 2
- 7 Replace a Beacon 2
- 8 Configure a Beacon 2
The Login page displays.
2
CAUTION
Service Disruption
If you forget the current username and password, press the reset button for 10 seconds to reset
the values to the default username and password at startup.
Pressing the Reset button for less than 10 seconds reboots the device; pressing the Reset
button for 10 seconds resets the device to the factory defaults.
Enter your username and password in the Login page.
The default user name is admin. The default password is a random number, which is on the
label. Refer
Figure 2-1, “Sample safety label” (p. 19) for password details on the label.
3
Click LOG IN. The Overview page displays.
Note: To help protect the security of your Internet connection, the application displays a
pop-up reminder to change both the WiFi password and the Beacon 2 password.
To increase password security, use a minimum of 10 characters, consisting of a mix of
numbers and upper and lowercase letters.
A password must adhere to the following password rules:
Figure 8-2 Web GUI Login page
Configure a Beacon 2
GUI configuration
Logging in to the web-based GUI of the Beacon 2
WiFi Beacon 2
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49294-AAAA-TCZZA
December 2020
54 Issue 1