Product Guide
Table Of Contents
- Beacon 2 Product Guide
- Legal notice
- Contents
- List of tables
- List of figures
- About this document
- 1 What’s new
- 2 ANSI CPE safety guidelines
- 3 ETSI CPE safety guidelines
- 4 ETSI environmental and CRoHS guidelines
- 5 Beacon 2 unit data sheet
- 5.1 Overview
- 5.2 Beacon 2 part numbers and identification
- 5.3 Beacon 2 general description
- 5.4 Beacon 2 software and installation feature support
- 5.5 Beacon 2 interfaces and interface capacity
- 5.6 Beacon 2 LEDs
- 5.7 Beacon 2 detailed specifications
- 5.8 Beacon 2 functional blocks
- 5.9 Beacon 2 responsible party
- 5.10 Beacon 2 special considerations
- 6 Install a Beacon 2
- 7 Replace a Beacon 2
- 8 Configure a Beacon 2
Table 8-4 WAN Status IPv6 parameters (continued)
Field Description
Secondary DNS Indicates secondary Domain Name Server address.
Ethernet Link Status Indicates if the Ethernet link is up or down.
Tx Packets Indicates transmitter packets.
Rx Packets Indicates receiver packets.
Tx Dropped Indicates transmitter packets dropped.
Rx Dropped Indicates receiver packets dropped.
Err Packets Indicates error packets.
You can click the Refresh icon
to display up-to-date information.
END OF STEPS
8.8 Viewing home networking information
1
Click Status in the menu bar.
2
Click Home Networking in the left pane. The Home Networking page displays the following
information.
Configure a Beacon 2
Viewing device information and connection status
Viewing home networking information
WiFi Beacon 2
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49294-AAAA-TCZZA
December 2020
64 Issue 1