Product Guide
Table Of Contents
- Beacon 2 Product Guide
- Legal notice
- Contents
- List of tables
- List of figures
- About this document
- 1 What’s new
- 2 ANSI CPE safety guidelines
- 3 ETSI CPE safety guidelines
- 4 ETSI environmental and CRoHS guidelines
- 5 Beacon 2 unit data sheet
- 5.1 Overview
- 5.2 Beacon 2 part numbers and identification
- 5.3 Beacon 2 general description
- 5.4 Beacon 2 software and installation feature support
- 5.5 Beacon 2 interfaces and interface capacity
- 5.6 Beacon 2 LEDs
- 5.7 Beacon 2 detailed specifications
- 5.8 Beacon 2 functional blocks
- 5.9 Beacon 2 responsible party
- 5.10 Beacon 2 special considerations
- 6 Install a Beacon 2
- 7 Replace a Beacon 2
- 8 Configure a Beacon 2
3
Configure the following parameters.
Table 8-8 Diagnostics parameters
Field Description
WAN Connection List Choose a WAN connection to diagnose from
the drop-down menu.
IP or Domain Name Enter the IP address or domain name.
Test Select the test type: ping, traceroute, or
both.
Ping Try Times (1 ~ 1000) Enter the number of ping attempts to
perform (1 - 1000); the default is 4.
Packet Length (64 ~ 1500) Enter a ping packet length (64-1024); the
default is 64.
Max no of trace hops (1 ~ 255) Enter the maximum number of trace hops
(1-255); the default is 30.
Figure 8-14 Diagnostics page
Configure a Beacon 2
Maintenance
Diagnosing WAN connections
WiFi Beacon 2
December 2020
Issue 1 75
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49294-AAAA-TCZZA