Product Guide
Table Of Contents
- Beacon 2 Product Guide
- Legal notice
- Contents
- List of tables
- List of figures
- About this document
- 1 What’s new
- 2 ANSI CPE safety guidelines
- 3 ETSI CPE safety guidelines
- 4 ETSI environmental and CRoHS guidelines
- 5 Beacon 2 unit data sheet
- 5.1 Overview
- 5.2 Beacon 2 part numbers and identification
- 5.3 Beacon 2 general description
- 5.4 Beacon 2 software and installation feature support
- 5.5 Beacon 2 interfaces and interface capacity
- 5.6 Beacon 2 LEDs
- 5.7 Beacon 2 detailed specifications
- 5.8 Beacon 2 functional blocks
- 5.9 Beacon 2 responsible party
- 5.10 Beacon 2 special considerations
- 6 Install a Beacon 2
- 7 Replace a Beacon 2
- 8 Configure a Beacon 2
Configuring the network
8.25 Overview
8.25.1 Purpose
This chapter describes the network configuration tasks supported by the Beacon 2.
8.25.2 Contents
8.25 Overview 87
8.26 Configuring LAN 87
8.27 Configuring LAN IPv6 89
8.28 Configuring WAN 91
8.29 Configuring WAN DHCP 93
8.30 Configuring Wireless (2.4GHz) 95
8.31 Configuring Wireless (5 GHz) 98
8.32 Configuring IP Routing 101
8.33 Configuring DNS 103
8.34 Configuring TR-069 104
8.35 Configuring Mesh 105
8.26 Configuring LAN
1
Click Network in the menu bar.
2
Click LAN in the left pane. The LAN page displays.
Configure a Beacon 2
Configuring the network
Overview
WiFi Beacon 2
December 2020
Issue 1 87
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49294-AAAA-TCZZA