Product Guide
Table Of Contents
- Beacon 2 Product Guide
- Legal notice
- Contents
- List of tables
- List of figures
- About this document
- 1 What’s new
- 2 ANSI CPE safety guidelines
- 3 ETSI CPE safety guidelines
- 4 ETSI environmental and CRoHS guidelines
- 5 Beacon 2 unit data sheet
- 5.1 Overview
- 5.2 Beacon 2 part numbers and identification
- 5.3 Beacon 2 general description
- 5.4 Beacon 2 software and installation feature support
- 5.5 Beacon 2 interfaces and interface capacity
- 5.6 Beacon 2 LEDs
- 5.7 Beacon 2 detailed specifications
- 5.8 Beacon 2 functional blocks
- 5.9 Beacon 2 responsible party
- 5.10 Beacon 2 special considerations
- 6 Install a Beacon 2
- 7 Replace a Beacon 2
- 8 Configure a Beacon 2
Table 8-16 LAN parameters (continued)
Field Description
DHCP Start IP Address Enter the starting range of the DHCP IP address.
DHCP End IP Address Enter the ending range of the DHCP IP address.
DHCP Lease Time Enter the DHCP lease time (in minutes).
Primary DNS Enter the primary domain name server address.
Secondary DNS Enter the secondary domain name server address.
Static DHCP
MAC Address MAC address for the static DHCP.
IPv4 Address IPv4 address for the static DHCP.
4
Click ADD.
You can click DELETE to delete the LAN configuration.
END OF STEPS
8.27 Configuring LAN IPv6
1
Click Network in the menu bar.
2
Click LAN IPv6 in the left pane. The LAN IPv6 page displays.
Configure a Beacon 2
Configuring the network
Configuring LAN IPv6
WiFi Beacon 2
December 2020
Issue 1 89
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49294-AAAA-TCZZA