Product Guide
Table Of Contents
- Beacon 2 Product Guide
- Legal notice
- Contents
- List of tables
- List of figures
- About this document
- 1 What’s new
- 2 ANSI CPE safety guidelines
- 3 ETSI CPE safety guidelines
- 4 ETSI environmental and CRoHS guidelines
- 5 Beacon 2 unit data sheet
- 5.1 Overview
- 5.2 Beacon 2 part numbers and identification
- 5.3 Beacon 2 general description
- 5.4 Beacon 2 software and installation feature support
- 5.5 Beacon 2 interfaces and interface capacity
- 5.6 Beacon 2 LEDs
- 5.7 Beacon 2 detailed specifications
- 5.8 Beacon 2 functional blocks
- 5.9 Beacon 2 responsible party
- 5.10 Beacon 2 special considerations
- 6 Install a Beacon 2
- 7 Replace a Beacon 2
- 8 Configure a Beacon 2
Table 8-17 LAN parameters (continued)
Field Description
Maximum interval for periodic RA
messages
Enter the primary domain name server address.
Minimum interval for periodic RA
messages
Enter the secondary domain name server address.
4
Click SAVE.
You can click the Refresh icon
to update displayed information.
END OF STEPS
8.28 Configuring WAN
1
Click Network in the menu bar.
2
Click WAN in the left pane. The WAN page displays.
Configure a Beacon 2
Configuring the network
Configuring WAN
WiFi Beacon 2
December 2020
Issue 1 91
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49294-AAAA-TCZZA