Bluetooth Headset User Manual

5
charging. It may take a while
before charging starts. If
charging does not start,
disconnect the charger, plug it
in again, and retry. Charging the
battery fully may take up to 1
hour and 30 minutes.
4. When the battery is fully
charged, the indicator light
turns green. Disconnect the
charger from the headset and
the wall outlet.
The fully charged battery has power
for up to 6 hours and 30 minutes of
talktime or up to 150 hours of
standby time. However, the talk and
standby times may vary when used
with different mobile phones or
other compatible Bluetooth
devices, usage settings, usage
styles, and environments.
When battery power falls low, the
headset beeps and the red indicator
light starts to flash.
Switch the headset on or off
To switch on, press and hold the
power key until the headset beeps
and the green indicator light is
displayed.
To switch off, press and hold the
power key until the headset beeps
and the red indicator light is
displayed briefly.
Pair the headset
1. Ensure that your phone is
switched on and the headset is
switched off.
2. Press and hold the power key
until the green indicator light
starts to flash quickly.
3. Activate the Bluetooth feature
on the phone, and set the phone
to search for Bluetooth devices.
4. Select the headset from the list
of found devices.
5. Enter the passcode 0000 to pair
and connect the headset to your
phone. In some phones you may