BH-105_UG_1_9215210_en_1.0_Date.fm Page 1 Tuesday, May 19, 2009 2:36 PM Nokia Bluetooth Headset BH-105 4 1 5 2 3 8 9 6 10 Copyright © 2009 Nokia. All rights reserved.
BH-105_UG_1_9215210_en_1.0_Date.fm Page 2 Tuesday, May 19, 2009 2:36 PM DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this BH-105 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/ EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/ declaration_of_conformity/. © 2009 Nokia. All rights reserved.
BH-105_UG_1_9215210_en_1.0_Date.fm Page 3 Tuesday, May 19, 2009 2:36 PM Export Controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. Introduction With the Nokia Bluetooth Headset BH-105, you can make and receive calls while on the move. Read this user guide carefully before using the headset. Also, read the user guide for the mobile device that you connect to the headset.
BH-105_UG_1_9215210_en_1.0_Date.fm Page 4 Tuesday, May 19, 2009 2:36 PM Get started The headset contains the following parts shown on the title page: power key (1), earloop (2), answer/ end key (3), earpiece (4), indicator light (5), charger connector (6), and microphone (7). Before using the headset, you must charge the battery and pair the headset with a compatible device. Parts of the device are magnetic. Metallic materials may be attracted to the device.
BH-105_UG_1_9215210_en_1.0_Date.fm Page 5 Tuesday, May 19, 2009 2:36 PM light is displayed. Disconnect the charger from the headset, then from the wall outlet. The fully charged battery has power for up to 5 hours and 30 minutes of talk time or up to 120 hours of standby time. To check the battery charge when the headset is not connected to a charger, press the power key. If the indicator light is green, the charge level is sufficient. If the light is yellow, you may need to recharge the battery soon.
BH-105_UG_1_9215210_en_1.0_Date.fm Page 6 Tuesday, May 19, 2009 2:36 PM device, and set it to search for Bluetooth devices. 4. Select the headset from the list of found devices. 5. If necessary, enter the passcode 0000 to pair and connect the headset to your device. In some devices, you may need to make the connection separately after pairing. When the headset is connected to your device and is ready for use, the green indicator light flashes about every 5 seconds.
BH-105_UG_1_9215210_en_1.0_Date.fm Page 7 Tuesday, May 19, 2009 2:36 PM progress, press and hold the answer/ end key for about 2 seconds. Proceed as described in the user guide of your device. To answer or end a call, press the answer/end key. To reject a call, press this key twice. To switch a call from the headset to a compatible device, press and hold the answer/end key for about 2 seconds, or switch off the headset.
BH-105_UG_1_9215210_en_1.0_Date.fm Page 8 Tuesday, May 19, 2009 2:36 PM Battery and charger information This device has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. This device is intended for use when supplied with power from the following chargers: AC-3, AC-4, AC-5, AC-8, and DC-4. The exact charger model number may vary depending on the type of plug.
BH-105_UG_1_9215210_en_1.0_Date.fm Page 9 Tuesday, May 19, 2009 2:36 PM Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Never use any charger that is damaged. Important: Battery talk and standby times are estimates only and depend on network conditions, features used, battery age and condition, temperatures to which battery is exposed, and many other factors. The amount of time a device is used for calls will affect its standby time.
BH-105_UG_1_9215210_en_1.0_Date.fm Page 10 Tuesday, May 19, 2009 2:36 PM Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely.