Nokia Bluetooth Headset BH-205 5 6 3 7 8 9255404/2
ENGLISH DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this HS-88W product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/ declaration_of_conformity/. The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life.
ENGLISH Unauthorized changes or modifications to this device may void the user's authority to operate the equipment. Export Controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. Introduction The Nokia Bluetooth Headset BH-205 allows you to make and receive calls while on the move. You can use the headset with compatible phones that support Bluetooth wireless technology.
ENGLISH There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider. Get started The headset contains the following parts shown on the title page: charger connector (1), multifunction key (2), indicator light (3), volume keys (4), earloop (5), and microphone (6). Before using the headset, you must charge the battery and pair the headset with a compatible phone. Note: Parts of the headset are magnetic.
ENGLISH from the device, as you may damage the device. 1. Connect the charger to a wall outlet. 2. Connect the charger cable to the charger connector on the headset. The red indicator light is displayed while charging. It may take a while before charging starts. If charging does not start, connect the charger again, and retry. Charging the battery fully may take up to 2 hours. 3. When the battery is fully charged, the red indicator light turns off.
ENGLISH 3. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices. 4. Select the headset from the list of found devices. 5. Enter the passcode 0000 to pair and connect the headset to your phone. In some phones you may need to make the connection separately after pairing. You only need to pair the headset with your phone once. If the pairing is successful, the headset beeps once and appears in the phone menu where you can view the currently paired Bluetooth devices.
ENGLISH To answer or end a call, press the multifunction key. To reject an incoming call, press the multifunction key twice. To mute or unmute the microphone during a call, press and hold the multifunction key and the volume up key at the same time. To switch the call between the headset and your compatible phone, press and hold the multifunction key and the volume down key at the same time.
ENGLISH particularly limited in temperatures well below freezing. Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste. Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage.
ENGLISH • Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. • Do not paint the device. Paint can clog the moving parts and prevent proper operation. All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service.