Nokia Bluetooth Stereo Headset BH-905i with active noise cancellation User Guide 9222807 Issue 1 EN
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this BH-905i product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/ declaration_of_conformity/. © 2010 Nokia. All rights reserved. Nokia, Nokia Connecting People and the Nokia Original Accessories logo are registered trademarks of Nokia Corporation. Nokia tune is a sound mark of Nokia Corporation.
Contents 1. Introduction ......................... 4 Bluetooth wireless technology .......... 4 About active noise cancellation........ 5 2. Get started............................ 6 Keys and parts ........................................ Connection method .............................. Connect using Bluetooth connectivity ......................................... Connect using the audio cables and adapters........................... Charge the battery ................................
Introduction 1. Introduction The Nokia Bluetooth Stereo Headset BH-905i with active noise cancellation allows you to handle calls hands-free with a compatible mobile device and listen to music from a compatible music player. Active noise cancellation helps you to use the headset also in noisy environments. You can connect the headset to a compatible device using Bluetooth wireless technology or the supplied audio cables. Read this user guide carefully before using the headset.
Introduction Profile (HFP) 1.5, Advanced Audio Distribution Profile (A2DP) 1.2, and Audio Video Remote Control Profile 1.0. Check with the manufacturers of other devices to determine their compatibility with this device. ■ About active noise cancellation Wolfson AudioPlusTM Ambient Noise Cancellation technology uses patented signal processing technology and advanced acoustic design expertise to deliver class-leading active noise cancellation for stereo headsets and headphones.
Get started 2. Get started ■ Keys and parts The headset contains the following parts: 1. Power key for active noise cancellation 2. Indicator light for charging and active noise cancellation 3. Charger connector 4. Volume keys 5. Rewind key 6. Connector for Nokia CA-143U or CA-182U audio cable 7. Bluetooth indicator light 8. Play/Pause key 9. Forward key 10. Multifunction key Parts of the device are magnetic. Metallic materials may be attracted to the device.
Get started headset to the device (see “Pair and connect the headset to a Bluetooth device”, p. 10). If you plug the CA-143U or CA-182U audio cable into the headset when the headset is connected to a Bluetooth device, the device is disconnected and Bluetooth connectivity is deactivated. Connect using the audio cables and adapters The headset is supplied with the Nokia CA-143U and CA-182U audio cables. The headset may also be supplied with adapters to connect the cable to different devices.
Get started and the AD-70 adapter, and insert the adapter into the headphone connector. To connect the headset to an airplane audio system that has a 3.5 mm headphone connector, plug the audio cable into the headset and the AD-71 adapter, and insert the adapter into the headphone connector. To use the headset for internet (VoIP) calls, plug the CA-143U audio cable into the headset and the AD-77 adapter, and insert the adapter into the headphone and microphone connectors on your computer.
Get started Operating time when using the audio cable The fully charged battery has power for up to 40 hours of active noise cancellation. ■ Activate or deactivate Bluetooth connectivity When Bluetooth connectivity is activated, you can connect the headset to one or two compatible Bluetooth devices. Even if Bluetooth connectivity is deactivated, you can use the headset for handling calls and listening to music through the supplied audio cables.
Get started ■ Pair and connect the headset to a Bluetooth device If your mobile device supports the A2DP Bluetooth profile and has a music player feature, you can use the device to also play music through the headset. If your mobile device does not support the A2DP profile, you can separately pair the headset with the mobile device and a music player that supports this profile.
Get started When the headset is connected to your device and is ready for use, the Bluetooth indicator light flashes blue slowly. You can pair the headset with up to eight devices but connect it to only one device supporting the HFP Bluetooth profile and another device supporting the A2DP Bluetooth profile at a time. Disconnect the headset To disconnect the headset from your Bluetooth device, deactivate Bluetooth connectivity on the headset, or disconnect the headset in the Bluetooth menu of your device.
Get started • Ensure that Bluetooth connectivity is activated on the headset and the other device and the headset is paired with your device. • Ensure that the CA-143U or CA-182U audio cable is not connected to the headset. • Ensure that the headset is within 10 metres (33 feet) of your device and that there are no obstructions between the headset and the device, such as walls, or other electronic devices. See also “Clear settings or reset”, p. 16.
Basic use 3. Basic use ■ Place the headset over the head Turn the speaker pads towards each other, and place the headset over your head so that the pads rest comfortably on your ears. Place the pad indicated with L on the left ear and the pad with R on the right ear. Adjust the headband length for the best fit. Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety.
Basic use ■ Calls To make a call, use your mobile device in the normal way when the headset is connected to it. To redial the number you last called (if your mobile device supports this feature with the headset), when no call or music playback is in progress, press the multifunction key twice.
Basic use Warning: Listen to the headset at a moderate level. To play a song, select the song in the music player, and press the play/ pause key. To pause or resume playing, press the play/pause key when using Bluetooth connectivity, or press and hold the play/pause key when using the audio cable. To stop playing when using Bluetooth connectivity, press and hold the play/pause key for about 2 seconds. To select the next song during playback, press the forward key.
Basic use ■ Clear settings or reset To clear the volume and pairing settings from the headset, deactivate Bluetooth connectivity, and press and hold the multifunction key and the volume up key (for about 5 seconds) until the Bluetooth indicator light starts to alternate between red and green. To reset the headset if it stops functioning, even though it is charged, press the volume down key, the multifunction key, and the rewind key at the same time. The reset does not clear the settings.
Battery and charger information 4. Battery and charger information This device has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. This device is intended for use when supplied with power from the following chargers: AC-3, AC-4, AC-5, AC-15, and DC-4. The exact charger model number may vary depending on the type of plug. The plug variant is identified by one of the following: E, X, AR, U, A, C, K, or B.
Take care of your device Take care of your device Handle your device, charger and accessories with care. The following suggestions help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that corrode electronic circuits. If your device gets wet, allow it to dry completely. • Do not use or store the device in dusty or dirty areas. Moving parts and electronic components can be damaged.
Take care of your device Wolfson Microelectronics plc is a leading global provider for high performance, mixed signal semiconductors to the consumer electronics market. Wolfson is renowned for its high performance audio and very low power consumption. Its devices are at the heart of many high profile consumer electronics products, including mobile phones, multimedia players, flat panel TVs and in-car infotainment systems.
