Nokia Bluetooth Headset BH-100 7 6 9 8 9255557/1 10
ENGLISH DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this HS-78W product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/ declaration_of_conformity/. 0434 The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life.
ENGLISH The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you. Unauthorized changes or modifications to this device may void the user's authority to operate the equipment. Export Controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.
ENGLISH devices to determine their compatibility with this device. There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider. Get started The headset contains the following parts shown on the title page: indicator light (1), power key (2), microphone (3), charger connector (4), answer/end key (5), and changeable earloop (6). Before using the headset, you must charge the battery and pair the headset with a compatible phone.
ENGLISH Charge the battery The headset has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device, as you may damage the device. 1. When the back of the headset is facing you, detach the earloop from the left of the headset. 2. Connect the charger to a wall outlet. 3. Connect the charger cable to the charger connector (7). The red indicator light is on while charging. It may take a while before charging starts.
ENGLISH Pair the headset 1. Ensure that your phone is switched on and the headset is switched off. 2. Press and hold the power key until the green indicator light starts to flash quickly. 3. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices. 4. Select the headset from the list of found devices. 5. Enter the passcode 0000 to pair and connect the headset to your phone. In some phones you may need to make the connection separately after pairing.
ENGLISH To answer or end a call, press the answer/end key. To reject an incoming The headset may be supplied with earloops in different colors. To change call, press the answer/end key twice. the earloop, detach it from both sides To adjust the headset volume during a call, use the volume keys on your of the headset, and attach the new earloop by inserting the catches at the phone. ends of the earloop into the To switch the call between the corresponding slots in the headset.
ENGLISH Battery information Your device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with Nokia approved chargers designated for this device. Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time.
ENGLISH • Keep all accessories and enhancements out of the reach of small children. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely. • Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged. • Do not store the device in hot areas.
