Nokia Bluetooth Headset BH-101 8 1 2 3 4 9 5 6 7 11 10 Issue 1 12
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this HS-94W product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/ phones/declaration_of_conformity/. © 2007 Nokia. All rights reserved. Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation.
Export Controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. Introduction The Nokia Bluetooth Headset BH101 allows you to make and receive calls while on the move. You can use the headset with compatible phones that support Bluetooth wireless technology. Read this user guide carefully before using the headset.
Get started The headset contains the following parts shown on the title page: earloop (1), charger connector (2), earpiece (3), volume keys (4), indicator light (5), multifunction key (6), and microphone (7). Before using the headset, you must charge the battery and pair the headset with a compatible phone. Parts of the device are magnetic. Metallic materials may be attracted to the device.
charging. It may take a while before charging starts. Charging the battery fully may take up to 2 hours. 3. When the battery is fully charged, the indicator light turns green. Disconnect the charger from the headset and the wall outlet. The fully charged battery has power for up to 8 hours of talk time or up to 180 hours of standby time. However, the talk and standby times may vary with different compatible Bluetooth devices, usage settings, usage styles, and environments.
3. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices. 4. Select the headset from the list of found devices. 5. Enter the passcode 0000 to pair and connect the headset to your phone. In some phones, you may need to make the connection separately after pairing. You only need to pair the headset with your phone once. If the pairing is successful, the headset appears in the phone menu where you can view the currently paired Bluetooth devices.
Call handling To make a call, use your phone in the normal way when the headset is connected to your phone. If your phone supports last number redialling with the headset, press the multifunction key twice while no call is in progress. If your phone supports voice dialling with the headset, press and hold the multifunction key for about 2 to 3 seconds until the phone start voice dialling, and proceed as described in the user guide of the phone. Voice dialling cannot be used during a call.
switched on, and paired with your phone. Battery information Your device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with Nokia approved chargers designated for this device. Use of an unapproved charger may present a risk of fire, explosion, leakage, or other hazard.
Never use any charger that is damaged. Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely. • Do not use or store the device in dusty, dirty areas.
If the product is not working properly, take it to the nearest authorised service facility for service. 10 10 © 2007 Nokia. All rights reserved.
