Nokia E90 Communicator User Guide 9251240 Issue 2
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RA-6 product is in compliance with the essential requirements and other relevant provisions of Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/. © 2007 Nokia. All rights reserved. Nokia, Nokia Connecting People, Nokia Care, Eseries and E90 are trademarks or registered trademarks of Nokia Corporation. Nokia tune is a sound mark of Nokia Corporation.
Contents For your safety..............................................................................6 About your device......................................................................................6 Network services........................................................................................7 Enhancements, batteries, and chargers..............................................7 1. Get started.................................................................................
Contents Active notes ..............................................................................................41 Create and edit notes..........................................................................41 Settings for active notes....................................................................42 Converter ...................................................................................................42 Convert measurements..................................................................
Contents Data synchronization ............................................................................74 Create a synchronization profile......................................................74 Select applications to synchronize..................................................74 Synchronization connection settings............................................74 Barcode reader ........................................................................................75 Download! ............................
For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
For your safety The office applications support common features of Microsoft Word, PowerPoint, and Excel (Microsoft Office 2000, XP, and 2003). Not all file formats can be viewed or modified. Network services To use the phone you must have service from a wireless service provider. Many of the features require special network features.
1. Get started Note: The actual invoice for calls and services from your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth. Model number: Nokia E90-1. Hereinafter referred to as Nokia E90 Communicator. Insert the SIM card and battery For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider or other vendor.
Get started 5. Place the hooks of the back cover to the slots. 6. Slide the back cover back to place. Insert the memory card Use only compatible microSD cards approved by Nokia for use with this device. Nokia uses approved industry standards for memory cards, but some brands may not be fully compatible with this device. Incompatible cards may damage the card and the device and corrupt data stored on the card. Use a memory card to save the memory on your device.
Get started 2. Insert the memory card in the slot with the contact area first. Make sure the contact area is towards the front cover of the device. 3. Push the card in. You hear a click when the card locks into place. 4. Close the cover. Eject the memory card Important: Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted.
Get started Keys and parts on the cover 1 — Earpiece 2 — Power key 3 — Voice key 4 — Navi™ scroll key. Press the scroll key to enter a selection, to scroll left, right, up, and down on the display. 5 — Selection key. Press the selection key to perform the function shown above it on the display. 6 — Selection key 7 — Clear key 8 — End key. Press the end key to reject a call, end active calls and held calls, and with a long keypress, end data connections (GPRS, data call).
Get started Keys and parts on the communicator 1 — Selection key 2 — Selection key 3 — Menu key 4 — Application keys 5 — End key 6 — Call key 7 — Camera (for video calls only) My own key. To configure the My own key to open an application, press the key. To change the selected application, press and hold the My own key. Your network operator may have assigned an application to the key, in which case you cannot change the application.
Get started First start-up 1. Press and hold the power key. 2. If the device asks for a PIN code or lock code, enter the code, and select OK. 3. When prompted, enter the current date, time, and the city in which you are located. To switch the time between a.m. and p.m., scroll up or down. To find your city, enter the first letters of the city name.
Get started All calls are forwarded to another number. A headset is connected to the device. The connection to a headset with Bluetooth connectivity has been lost. A hands-free car kit is connected to the device. A loopset is connected to the device. A text phone is connected to the device. Your device is synchronizing. You have an ongoing push-to-talk connection. Antennas Your device has internal antennas.
2. Basic information about your device Welcome Select > Help > Welcome. When you switch on your device for the first time, the Welcome application opens. Select from the following: • Tutorial provides information about your device and shows you how to use it. See "Tutorial " on page 19. • Transfer enables you to transfer content, such as contacts and calendar entries, from a compatible Nokia device. See "Transfer content between devices " on page 20.
Basic information about your device To copy, press and hold the shift key, and select the text with the scroll key. Press and hold the shift key, and select Copy. To paste, scroll to where you want to paste the text, press and hold the shift key, and select Paste. This method may not work in applications that have their own copy and paste commands. To select different items, such as messages, files, or contacts, scroll to the item you want to select.
Basic information about your device Predictive text input 1. To activate predictive text input, press # twice quickly. This activates predictive text input for all editors in the device. The indicator is shown on the display. 2. To write the desired word, press 2–9. Press each key only once for one letter. 3. When you have finished writing the word and it is correct, scroll right to confirm it, or press 0 to add a space.
Basic information about your device Themes Select > Tools > Themes. With Themes, you can change the look of the display of your device, such as the background image and colors. To change the look of the display, open the General folder, select a theme and Options > Set. To change the background image of the standby mode, select Wallpaper > Image, and select the desired image.
Basic information about your device You can protect a memory card with a password to prevent unauthorized access. To set a password, select Options > Set password. The password can be up to eight characters long and is case-sensitive. The password is stored in your device. You do not need to enter it again while you use the memory card in the same device. If you use the memory card in another device, you are asked for the password. Not all memory cards support password protection.
3. Transfer content between devices Select > Tools > Transfer. You can transfer content, such as contacts, from a compatible Nokia device to your Nokia E90 Communicator using Bluetooth connectivity or infrared. The type of content that can be transferred depends on the device model. If the other device supports synchronization, you can also synchronize data between the other device and your Nokia E90 Communicator.
4. Telephone Answer a call Note: The actual invoice for calls and services from your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth. To make and receive calls, the device must be switched on, the device must have a valid SIM card installed, and you must be located in a service area of the cellular network. To answer a call, press the call key. To reject the call, press the end key.
Telephone To disable the sending of audio, video, or video and audio, select Options > Disable > Sending audio, Sending video, or Sending aud. & video. To use the loudspeaker for receiving audio, select Options > Activate loudspeaker. To mute the loudspeaker and use the earpiece, select Options > Activate handset. To swap the places of images, select Options > Change image order. To zoom the image on the display, select Options > Zoom in or Zoom out.
Telephone Connect to the net call service To make or receive a net call, your device must be connected to a net call service. If you have selected automatic login, your device automatically connects to the net call service. If you login to the service manually, choose an available network from the list, and select Select. The list of networks is refreshed automatically every 15 seconds. To refresh the list manually, select Options > Refresh. Use this option, if your WLAN is not shown on the list.
Telephone To divert calls to another phone number, select a call type and a diverting option, then select Options > Activate > Diverted to:. Enter a number in the Number: field, or select Find to retrieve a number saved in Contacts. Call barring Select > Tools > Settings > Phone > Call barring. You can bar the calls that can be made or received with the device (network service). To change the settings, you need the barring password from your service provider.
5. Log Select > Log. Log stores information about the communication history of the device. The device registers missed and received calls only if the network supports these functions, the device is switched on and within the network service area. To view recently missed, received, and dialed calls, select Recent calls. Tip: To open Dialled numbers in the standby modes, press the call key. To view the approximate duration of calls to and from your device, select Call duration.
6. Messaging Select > Messaging. In Messaging (network service), you can send and receive text messages, multimedia messages, and e-mail messages. You can also receive web service messages, cell broadcast messages, and special messages containing data, and send service commands. Before sending or receiving messages, you may need to do the following: • Insert a valid SIM card in the device and be located in the service area of a cellular network.
Messaging 2. In the To field, enter a recipient's number, or press the scroll key to add a recipient from Contacts. If you enter more than one number, separate the numbers with a semicolon. 3. Enter the text of the message. To use a template, select Options > Insert > Template. 4. Select Options > Send. Note: Your device may indicate that your message was sent to the message center number programmed into your device.
Messaging 3. In the Subject field, enter a subject for the message. To change the fields that are visible, select Options > Address fields. 4. Enter the text of the message, and select Options > Insert object to add media objects. You can add objects such as Image, Sound clip, or Video clip. The wireless network may limit the size of MMS messages. If the inserted picture exceeds this limit, the device may make it smaller so that it can be sent by MMS. 5.
Messaging Media objects and message attachments may contain viruses or other harmful software. Do not open any objects or attachments unless you are sure of the trustworthiness of the sender. To view or play a media object, press the scroll key. To save a media object in its corresponding application, select Options > Save. To send a media object to compatible devices, select Options > Send.
Messaging 3. To manage your e-mail offline to save in connection costs and work in conditions that do not allow a data connection, select Options > Disconnect to disconnect from the remote mailbox. Any changes you make in the remote mailbox folders while offline, take effect in your remote mailbox the next time you go online and synchronize. Read and reply to e-mail Important: Exercise caution when opening messages.
Messaging Receive cell broadcast messages To receive messages on various topics, such as weather or traffic conditions, from your service provider, select Options > Cell broadcast (network service). For available topics and relevant topic numbers, contact your service provider. Cell broadcast messages cannot be received in UMTS (3G) networks. A packet data connection may prevent cell broadcast reception. Instant messaging Select > Connectivity > IM.
Messaging To search for IM groups and group IDs, select IM groups > Options > Search. You can search by Group name, Topic, and Members (user ID). To add an IM user to the group, select Options > Add member. Select a user from your IM contacts or enter the contact ID. To remove a member from the IM group, select Options > Remove. To provide members with editing rights to the group, select Options > Add editor. Select a user from your IM contacts or enter the ID of the user.
Messaging Text message settings Select > Messaging > Options > Settings > Text message. Select from the following: • Message centres — View the available message centers for your device. • Message centre in use — Select a message center to send the message. • Character encoding — Select Reduced support to use automatic character conversion to another encoding system when available. • Receive report — Select Yes if you want the network to send you delivery reports on your messages (network service).
Messaging • New e-mail alerts — Select whether you want to be notified of a new received e-mail message with a tone and a note. Retrieval settings Select the e-mail account, and Options > Edit > Retrieval settings, and define the following settings: • E-mail to retrieve (for POP3 mailboxes only) — Select whether you want to retrieve only the e-mail header information such as sender, subject and date, e-mail, or e-mail with attachments.
7. Contacts Select > Contacts. You can save and update contact information, such as phone numbers, home addresses, or e-mail addresses of your contacts. You can add a personal ringing tone or a thumbnail image to a contact. You can also create contact groups, which allow you to send text messages or e-mail to many recipients at the same time. You can add received contact information (business cards) to Contacts. Contact information can only be sent to or received from compatible devices.
Contacts You can select a ringing tone for a contact or contact group. If the caller's phone number is sent with the incoming call and your device recognizes the number, the ringing tone plays when the contact calls you. To select a ringing tone for a contact or contact group, open the contact or contact group, and select Options > Ringing tone. A list of ringing tones opens. Select the ringing tone you want to use. To remove the assigned ringing tone, select Default tone from the list of ringing tones.
8. Calendar Select > Calendar. You can create and view scheduled events and appointments. You can also set alarms for calendar entries. You can synchronize your calendar data with a compatible computer using Nokia PC Suite. For information on synchronization, see the Nokia PC Suite guide. Create calendar entries You can create the following types of calendar entries: • Meeting entries have a specific date and time. • Memo entries are related to the whole day but not to a specific time of the day.
Calendar 6. Define how the entry is handled during synchronization in the Synchronisation field. Select Private to hide the entry from viewers if the calendar is available online, Public to make the entry visible to viewers if the calendar is available online, or None to not copy the entry to your computer when you synchronize. To mark a task as completed, select Options > Mark as done. To restore a task, select Options > Mark as not done.
9. Clock Select > Clock. In Clock, you can view your local time and time zone information, set and edit alarms, or modify date and time settings. Alarm clock Open the alarm clock tab. To set an alarm, select Options > Set alarm, and enter the alarm time. When an alarm is active, is displayed. To switch off the alarm, select Stop, or to stop the alarm for 5 minutes, select Snooze.
10. Select Office applications > Office. Some office applications may not be available in all languages, in which case the application is in English in your device. Opening a large file may not be possible or it may take a while. File manager Select > Office > File mgr.. With File manager, you can manage the contents and properties of files and folders on your device memory and memory card. You can open, create, move, copy, rename, send, and search for files and folders.
Office applications With Nokia Team Suite, you can create, edit, and delete teams, and send messages, view teams' web pages and communication history, and make phone calls to teams. To create a new team, select Options > Team > Create new. Give a name for the team and enter the conference call service information, if needed. Then select the members for the team.
Office applications To add boldface, italics, or underlining to your text or change the font color, press and hold the shift key and use the scroll key to select the text. Then select Options > Text. To link a note to a contact, select Options > Link note to call > Add contacts. You can see the note on the display of your device when making a call to or receiving a call from the contact. Settings for active notes Select Settings. To save notes to your device memory, select Memory in use > Phone memory.
Office applications To configure a printer for your device, select select Options > Set as default. > Office > Printers > Options > Add. To set the printer as the default printer, Before you print, make sure your device is properly connected to the printer. To print a message or a file, select Options > Print. To print to a file, select Options > Printing options > Print to file, and determine the location for the file. To change the printing options, select Options > Printing options.
11. Connectivity Your device offers several options to connect to the internet, a corporate intranet, or to another device or computer. Wireless methods include wireless LAN, Bluetooth, and infrared. Your device supports a wired solution with a USB (Universal Serial Bus) cable connection for Nokia PC Suite. Your device also allows you to communicate using net calls (Voice over IP), push to talk, instant messaging (chat), and modem-based connections. Modem Select > Connectivity > Modem.
Connectivity To create an internet access point for a network, select Options > Define access point. Bluetooth This device is compliant with Bluetooth Specification 2.
Connectivity 1. Select Options > New paired device. The device starts to search for Bluetooth devices within range. If you have sent data using Bluetooth before, a list of the previous search results is displayed. To search for more Bluetooth devices, select More devices. 2. Select the device with which you want to pair, and enter the passcode. The same passcode must be entered to the other device as well. 3.
Connectivity passcode. When the device asks to make the connection automatic, select Yes. If you select No, connection requests from this device must be accepted separately every time. To end the remote SIM access connection from your device, select > Connectivity > Bluetooth > Remote SIM mode > Off. Infrared Do not point the infrared (IR) beam at anyone's eye or allow it to interfere with other IR devices. This device is a Class 1 laser product.
Connectivity 4. After defining the basic settings, select Options > Advanced settings to define the advanced settings or Back to save the settings and exit. Advanced internet access point settings for data calls After setting up a basic internet access point for Data call or High speed (GSM), select Options > Advanced settings, and define the following advanced settings: • • • • • • • • • • • IPv4 settings — Enter the device IP and name server addresses for the IPv4 internet protocol.
12. Wireless local area network Some places, like France, have restrictions on the use of wireless LAN. Check with your local authorities for more information. Your device can detect and connect to a wireless local area network (WLAN). To use WLAN, a network must be available in the location and your device must be connected to it. See WLAN availability To have your device show WLAN availability, select availability.
Wireless local area network If you select a secured WLAN, you are asked to enter the relevant passcodes. To connect to a hidden network, you must enter the correct hidden service set identifier (SSID). WLAN access points > Connectivity > WLAN wiz.. To create an internet access point in a WLAN, To search for WLANs available within range, select select Options > Define access point. To view the details of a network shown in the list, select Options > Details.
13. Select Web > Web. To browse the web (network service), you need to configure the internet access point settings. If you are using a data call or GPRS connection, your wireless network must support data calls or GPRS, and the data service must be activated for your SIM card. Check the availability of services, pricing, and fees with your service provider. Service providers also give you instructions on how to use their services.
Web News feeds and blogs Select > Web > Web feeds. Feeds usually contain headlines and articles, often about recent news or other topics. Blog is a shortening of weblog, which is a continuously updated web diary. To download a feed or blog, scroll to it, and press the scroll key. To add a feed or blog, select Options > Manage feed > New feed. To edit a feed or blog, select Options > Manage feed > Edit.
14. Select Global Positioning System (GPS) > GPS. The Global Positioning System (GPS) is a worldwide radio navigation system that includes 24 satellites and their ground stations that monitor the operation of the satellites. A GPS terminal, such as the GPS receiver in the Nokia E90 Communicator, receives low-power radio signals from the satellites, and measures the travel time of the signals. From the travel time, the GPS receiver can calculate its location to the accuracy of meters.
Global Positioning System (GPS) 3. Select the maps or voice guidance files you want, and download and install them to your device. Satellite information The GPS indicator is shown on the display when you browse maps. When the device tries to establish a GPS connection, the circles are yellow and the icon is blinking. When the device receives enough data from the satellites to calculate the coordinates of your current location, the icon stops blinking and turns green.
Global Positioning System (GPS) 4. To view the route itinerary, select Options > Show route. The route is calculated using the selected routing settings. To view the itinerary route on the map, select Options > Show on map. To run a simulation of the route, select Options > Start simulation. Tip: You can also use a compatible GPS receiver with Bluetooth connectivity with Maps. For example, in a car, an external GPS receiver can be positioned so that it has a clear view of the sky.
Global Positioning System (GPS) To activate the trip meter, select Trip dist. > Options > Start. To stop the trip meter, select Options > Stop. To reset all fields and start calculating the trip again, select Trip dist. > Options > Restart. To change the measuring system in use, select Options > Settings > Measurement system > Metric or Imperial. To enter the altitude calibration to correct the altitude received from the positioning satellites, select Options > Settings > Altitude calibration.
15. Business voice applications Push to talk Select > Connectivity > PTT. Push to talk (PTT) (network service) provides direct voice communication connected with the push of a key. With push to talk, you can use your device as you would use a walkie-talkie. You can use push to talk to have a conversation with one person or with a group of people, or to join a channel. A channel is like a chat room: you can call the channel to see if anyone is online.
Business voice applications To view the currently active users of a channel, select Options > Active members. To view more information about a selected user, select Options > Contact details. When you log in to push to talk, push to talk automatically connects to the channels that were active when the application was last closed. Exit push to talk To exit push to talk, select Options > Exit. Select Yes to log out and close the service.
Business voice applications To listen to a voice, open the voice tab, select the voice, and select Play voice. Voice commands Select > Tools > Voice comm.. Use voice commands to make phone calls and launch applications, profiles, or other functions on the device. The device creates a voice tag for the entries in Contacts and for the functions designated in the Voice commands application. When a voice command is spoken, the device compares the spoken words to the voice tag in the device.
16. Select Media applications > Media. Media contains different media applications that allow you to save and view images, record sounds, and play sound clips. RealPlayer Select > Media > RealPlayer. RealPlayer plays video clips and audio files that are stored in the device memory or on a memory card, transferred to your device from an e-mail message or a compatible computer, or streamed to your device over the web. Supported formats include MPEG-4, MP4 (not streaming), 3GP, RV, RA, AAC, AMR, and Midi.
Media applications Listen to music Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. To select a music track, select Options > Music library. All tracks lists all music on your device. To view sorted songs, select Albums, Artists, Genres, or Composers. To play the track, select Options > Play. To pause the playing, scroll to and press the scroll key. To select the previous or next track, scroll up or down.
Media applications Capture an image Your device supports an image capture resolution of up to 2048 x 1536 pixels. To capture an image, use the display as a viewfinder, aim at your subject, and press the capture key half way down. The camera focuses on the subject. Then press the capture key all the way down. The device saves the image in Gallery. Tip: To zoom in or out before capturing an image, scroll left or right.
Media applications Video settings Select Options > Settings and from the following: Video quality — Select the video quality. Video stabilisation — Select whether to reduce camera shaking when recording the video. Audio recording — Select whether to include audio in the recording. Add to album — Select a folder where to save the video clip in Gallery. Show captured video — Select whether you want the first frame of the recorded video clip to be shown on the display after the recording stops.
Media applications To move the image to another folder, select Options > Organise > Move to folder. Scroll to the folder to which you want to move the image, and select Move. Radio Select > Media > Radio. With the radio, you can search for radio channels, listen to them, and save them on your device. You can leave the radio open in the background while using the device for other purposes.
17. Select Settings > Tools > Settings. You can define and modify various settings of your device. Modifying these settings affects the operation of your device across several applications. Some settings may be preset for the device or sent to you in a special message by your service provider. You may not be able to change such settings. Select the setting you want to edit to do the following: • Switch between two values, such as on or off. • Select a value from a list.
Settings To set the various alert tones, select Tones > Message alert tone, E-mail alert tone, Calendar alarm tone, or Clock alarm tone. To set the device to vibrate when you receive a call, select Tones > Vibrating alert. To set the volume level of the device keypad tones, select Tones > Keypad tones. To set the warning tones on or off, select Tones > Warning tones. Language settings To set the language used on the device display, select Language > Phone language.
Settings To set a new lock code, select Phone and SIM card > Lock code. The preset lock code is 12345. Enter the old code and then the new code twice. The new code can be 4-255 characters long. Both alphabets and digits can be used, and both uppercase and lowercase alphabets are possible. The device notifies you if the lock code is not properly formatted.
Settings Access points Select > Tools > Settings > Connection > Access points. An access point is where your device connects to the network by way of a data connection. To use e-mail and multimedia services or to browse web pages, you must first define access points for these services. Some or all access points may be preset for your device by your service provider, and you may not be able to create, edit, or remove them.
Settings Select WLAN security settings and from the following: • WEP key in use — Select the desired WEP key. • Authentication type — Select Open or Shared. • WEP key settings — Edit the settings for the WEP key. WEP key settings In the access point settings, select WLAN security mode > WEP. Select WLAN security settings > WEP key settings and from the following: • WEP encryption — Select the desired WEP encryption key length.
Settings To set the time-out period after which data calls automatically end if no data has been transferred, select Online time. Select User defined to enter the time yourself or Unlimited to keep the connection active until you select Options > Disconnect. Session initiation protocol (SIP) settings Select > Tools > Settings > Connection > SIP settings.
Settings To delete configurations for a trusted server, select Options > Delete. The configuration settings for other applications provided by this server are also deleted. Application settings Select > Tools > Settings > Applications. Select an application from the list. © 2007 Nokia. All rights reserved.
18. Device and data management Back up data It is recommended to back up device memory regularly to the memory card or a compatible computer. To back up information from the device memory to a memory card, select memory. To restore information from the memory card to the device memory, select card. > Tools > Memory > Options > Back up phone > Tools > Memory > Options > Restore from You can also connect your device to a compatible computer and use Nokia PC Suite to back up data.
Device and data management • J2ME™ applications compatible with the Symbian operating system. The Java application installation file extensions are .jad or .jar. Installation files may be transferred to your device from a compatible computer, downloaded during browsing, or sent to you in a multimedia message, as an e-mail attachment, or with Bluetooth. If you use Nokia PC Suite to transfer a file to your device, save the file in the C:\nokia\installs folder on your computer.
Device and data management Some media files, such as images, music, or video clips, are protected by digital usage rights. The activation keys for such files may allow or restrict their usage. For example, with some activation keys you may listen to a music track only a limited number of times. During one playback session you may rewind, fast-forward, or pause the track, but once you stop it, you have used one of the instances allowed.
Device and data management • Network authentication — To authenticate your device to the network before synchronization, select Yes. Enter your network user name and network password. Barcode reader Select > Tools > Barcode. Use the Barcode application to decode different types of codes, such as barcodes and codes in magazines. The codes may contain information such as web addresses, e-mail addresses, and phone numbers.
19. Security Fixed dialing Select > Contacts > Options > SIM contacts > Fixed dial contacts. With the fixed dialing service, you can restrict calls from your device to certain phone numbers. Not all SIM cards support the fixed dialing service. Contact your service provider for more information. When fixed dialing is activated, calls may be possible to the official emergency number programmed into your device. 1.
Security • • • • Certificate not trusted — You have not set any application to use the certificate. You may want to change the trust settings. Expired certificate — The period of validity has ended for the selected certificate. Certificate not valid yet — The period of validity has not yet begun for the selected certificate. Certificate corrupted — The certificate cannot be used. Contact the certificate issuer. Security modules Select > Tools > Settings > General > Security > Security module.
20. Shortcuts Here are some of the available keyboard shortcuts in your device. Shortcuts can make the use of the applications more efficient. General shortcuts Power key Press and hold to switch your device on and off. Menu key Press once to open the main menu for access to all applications. Press once to switch between profiles. Press and hold to bring up a list of open applications. To navigate between the open applications, select an application.
Shortcuts Ctrl+V Paste. Ctrl+X Cut. Ctrl+Z Undo. Ctrl + scroll right Move the focus one word forward. Ctrl + scroll left Move the focus one word backward. Chr + scroll right Move to the end of the line. Chr + scroll left Move to the start of the line. Chr + scroll up Page up. Chr + scroll down Page down. Ctrl + chr + scroll up Move to the start of the document. Ctrl + chr + scroll down Move to the end of the document. Shift + scroll right Select the next character on the right.
21. Glossary 3G 3rd generation mobile communications. A digital system for mobile communications which aims at global use and provides increased bandwidth. 3G lets a mobile device user access a wide variety of services, such as multimedia. Ad-hoc operating mode In a wireless LAN, the ad hoc operating mode allows you to send and receive data from other devices with compatible wireless LAN support. These functions may require an additional third party application to work.
Glossary PIN2 The PIN2 code is supplied with some SIM cards. The PIN2 code is required to access certain functions supported by the SIM card. The length of the PIN2 code is 4 to 8 digits. POP3 Post office protocol, version 3. A common mail protocol that can be used for accessing your remote mailbox. SIP Session initiation protocol. SIP is used for creating, modifying, and terminating certain types of communication sessions with one or more participants. SSID Service set identifier.
Battery information Your device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device.
Nokia battery authentication guidelines Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorised Nokia dealer, and inspect the hologram label using the following steps: Successful completion of the steps is not a total assurance of the authenticity of the battery.
Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing it. • Do not use or store the device in dusty, dirty areas.
Additional safety information Small children Your device and its enhancements may contain small parts. Keep them out of the reach of small children. Operating environment This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 1,5 centimeters (5/8 inches) away from the body.
Additional safety information gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, clearly marked.
Index Symbols/Numerics security 46 sending data 45 bookmarks adding 51 browsing 51 deleting 51 browsing offline 51 web 51 business cards 36 deleting 36 saving 36 sending 36 3-D ringing tones 64 802.
Index voice dialing 59 voice mail 24 camera 61 capturing an image 62 light sensitivity 62 recording a video clip 62 self-timer 62 sequence mode 62 still image settings 62 using the toolbar 62 capture key 62 car kit remote SIM access 46 cell broadcast 26, 32 settings 34 cell broadcast messages 31 Certificate manager 76 certificates 76 details 76 settings 76 changing the lock code 77 channels push to talk 57 radio 64 charging the battery 10 chat See IM Clock 39 alarms 39 settings 39 world clock 39 conference
Index files audio files 60 downloading 63 file rights 73 flash files 61 image files 63 sending 40 video files 60 find 40 fixed dialing 36, 76 Flash player 61 frequency settings 61 inserting battery 8 memory card 9 SIM card 8 installation log 72 installation software package settings 73 installing applications 72 software packages 72 instant messaging See IM internet 51 access points 47 browsing 51 ending connections 51 settings 47 internet telephony See net calls G Gallery 63 general settings 65 general
Index logos operator logo 65 welcome logo 65 receiving 28 replying to 28 sending 27 settings 33 viewing media objects 28 Music player 60 track lists 61 M MAC address 68 mail See e-mail mailboxes connecting 29 creating 29 maintenance services 14 making a call 21 Maps 53 measurements converting 42 measuring system changing 55 media applications 60 media objects 28 memory details 18 memory card 18 backing up data 72 formatting 18 inserting 9 locking 77 microSD 18 passwords 77 setting a password 18 setting
Index S PIN code changing 66 for security module 77 playing messages 26 music 60 video and audio 60 video clips 62 voice recordings 58 predictive text input 17, 66 presentations creating 28 viewing 28 printing 43 profiles 17 creating 17 customizing 17 net call profile 22, 70 selecting ringing tones 17 PTT See push to talk push messages 32 push to talk 57 contacts 57 creating a channel 57 exiting 58 logging in 57 making a call 57 settings 57 Q Quickoffice R satellite signal strength 55 saving current p
Index network 67 packet data 68 personalization 65 profiles 17 push to talk 57 RealPlayer 60 restoring 67 SIP 70 standby mode 65 telephone 67 text messages 33 time 66 tones 65 video clips 63 voice commands 59 voice recorder 58 WEP security 68 WLAN 68 WLAN access point 50 WLAN security 68 Settings wizard 19 sharing videos 22 shortcuts 78 applications 65 keys 65 signal strength 13 SIM access profile 46 SIM card inserting 8 text messages 27 SIM change lock 66 SIM directory 36 SIP creating profiles 67, 70 edit
Index voice commands 59 launching an application setting on a profile 59 settings 59 voice dialing 59 voice mail 24 calling 24 changing number 24 voice memos 58 voice over IP See net calls voice recorder settings 58 volume 17 radio 64 59 W wallpaper 63 WAP push messages 32 warning tones 65 Web 51 general settings 52 page settings 52 privacy settings 52 web feed settings 52 web feeds 52 week view in Calendar 38 Welcome 15 welcome note 65 WEP security settings 68 WEP keys 69 Wi-Fi See WLAN Wireless keyboa
