Product Guide
Table Of Contents
- 7368 ISAM ONT G-140W-H Product Guide
- 1 Preface
- Table of contents
- List of figures
- List of tables
- 2 ETSI ONT safety guidelines
- 3 ETSI environmental and CRoHS guidelines
- 4 ANSI ONT safety guidelines
- 5 G-140W-H unit data sheet
- 5.1 G-140W-H part numbers and identification
- 5.2 G-140W-H general description
- 5.3 G-140W-H software and installation feature support
- 5.4 G-140W-H interfaces and interface capacity
- 5.5 G-140W-H LEDs
- 5.6 G-140W-H detailed specifications
- 5.7 G-140W-H GEM ports and T-CONTs
- 5.8 G-140W-H performance monitoring statistics
- 5.9 G-140W-H functional blocks
- 5.10 G-140W-H standards compliance
- 5.11 G-140W-H special considerations
- 6 Install a G-140W-H indoor ONT
- 7 Replace a G-140W-H indoor ONT
- 8 Configure a G-140W-H indoor ONT
- 9 ONT configuration file over OMCI
- Customer document and product support
Configure a G-140W-H indoor ONT
138
7368 ISAM ONT G-140W-H Product Guide
3FE-48054-AAAA-TCZZA Issue: 01
3 Click Save.
4 STOP. This procedure is complete.
Procedure 42 Device management
1 Select Maintain > Device Management from the top-level menu in the GPON Home Gateway
window, as shown in Figure 58.
Figure 58 Device management window
Table 49 describes the fields in the Device management window.
Table 49 Device management parameters
2 Configure an alias for a specific host.
Field Description
Host Name Choose a hostname from the drop-down menu
Host Alias Enter an alias for the chosen host
Release 06.02.01 | September 2019 | Edition 01