Product Guide
Table Of Contents
- 7368 ISAM ONT G-140W-H Product Guide
- 1 Preface
- Table of contents
- List of figures
- List of tables
- 2 ETSI ONT safety guidelines
- 3 ETSI environmental and CRoHS guidelines
- 4 ANSI ONT safety guidelines
- 5 G-140W-H unit data sheet
- 5.1 G-140W-H part numbers and identification
- 5.2 G-140W-H general description
- 5.3 G-140W-H software and installation feature support
- 5.4 G-140W-H interfaces and interface capacity
- 5.5 G-140W-H LEDs
- 5.6 G-140W-H detailed specifications
- 5.7 G-140W-H GEM ports and T-CONTs
- 5.8 G-140W-H performance monitoring statistics
- 5.9 G-140W-H functional blocks
- 5.10 G-140W-H standards compliance
- 5.11 G-140W-H special considerations
- 6 Install a G-140W-H indoor ONT
- 7 Replace a G-140W-H indoor ONT
- 8 Configure a G-140W-H indoor ONT
- 9 ONT configuration file over OMCI
- Customer document and product support
7368 ISAM ONT G-140W-H Product Guide Configure a G-140W-H indoor ONT
Issue: 01 3FE-48054-AAAA-TCZZA 151
2 Click Refresh to update the displayed information.
3 STOP. This procedure is complete.
8.3.4 Maintenance
The G-140W-H ONT supports maintenance tasks, including:
• password change
• LOID configuration
• SLID configuration
Procedure 54 Password configuration
1 Select Maintain > Password from the top-level menu in the GPON Home Gateway window,
as shown in Figure 68.
Figure 68 Password window
Table 52 describes the fields in the password window.
Hardware Version Hardware version of the ONT
Boot Version Boot version of the ONT
Software Version Software version of the ONT
Chipset Chipset of the ONT
Device Running Time Amount of time the device has run since last reset in hours, minutes, and seconds
Field Description
(2 of 2)
Release 06.02.01 | September 2019 | Edition 01