Product Guide
Table Of Contents
- 7368 ISAM ONT G-140W-H Product Guide
- 1 Preface
- Table of contents
- List of figures
- List of tables
- 2 ETSI ONT safety guidelines
- 3 ETSI environmental and CRoHS guidelines
- 4 ANSI ONT safety guidelines
- 5 G-140W-H unit data sheet
- 5.1 G-140W-H part numbers and identification
- 5.2 G-140W-H general description
- 5.3 G-140W-H software and installation feature support
- 5.4 G-140W-H interfaces and interface capacity
- 5.5 G-140W-H LEDs
- 5.6 G-140W-H detailed specifications
- 5.7 G-140W-H GEM ports and T-CONTs
- 5.8 G-140W-H performance monitoring statistics
- 5.9 G-140W-H functional blocks
- 5.10 G-140W-H standards compliance
- 5.11 G-140W-H special considerations
- 6 Install a G-140W-H indoor ONT
- 7 Replace a G-140W-H indoor ONT
- 8 Configure a G-140W-H indoor ONT
- 9 ONT configuration file over OMCI
- Customer document and product support
7368 ISAM ONT G-140W-H Product Guide G-140W-H unit data sheet
Issue: 01 3FE-48054-AAAA-TCZZA 57
5.6 G-140W-H detailed specifications
Table 8 lists the physical specifications for G-140W-H indoor ONTs.
LAN 1 to 4 Green solid
Green flashing
Off
Powered device is connected to the associated port (includes devices with a wake-on-LAN
capability where a slight voltage is supplied to an Ethernet connection
LAN activity is present (in either direction)
No connected device
TEL 1 Green solid
Green flashing
Off
Provides a positive indication that at least one of the POTS lines, provisioned on the respective
Service Unit, has a telephone in the on-hook condition.
Phone is either in ‘call in’, ‘talking’, or off-hook
No service connected
VOIP Green solid
Green flashing
Off
Off hook or talking
Ringing
On hook
WPS Green solid
Green flashing
Red solid
Off
Wi-Fi protected setup link is up (negotiation and auto-configuration successful)
Wi-Fi protected setup link activity (negotiation and auto-configuration ongoing)
Wi-Fi protected setup processing exception or multiple peers using WPS simultaneously
Wi-Fi protected setup link is down or no link is connected (negotiation has not started or has
failed)
WLAN 2.4 GHz Green solid
Green flashing
Off
WLAN link up in 2.4 GHz
WLAN activity
WLAN is down or no link connected
WLAN 5 GHz Green solid
Green flashing
Off
WLAN link up in 5 GHz
WLAN activity
WLAN is down or no link connected
USB Green solid
Green flashing
Off
A device is connected to the USB port
Traffic activity is on the USB connection
No device is connected to the USB port
INTERNET Green solid Indicates the IP is connected (the device has a WAN IP address from IPCP/DHCP/Static and
broadband link is up) and no traffic is detected. If the IP or PPPoE session is dropped due to an
idle timeout, the light will remain green if the PON link is still present. If the session is dropped
for any other reason, the light is turned off.
Green flashing Indicates the IP with PPPoE/DHCP or the transmit and receive traffic is on going
Off Broadband physical connection is powered off, the device is in bridge mode with no IP address
assigned to the device, or the broadband physical interface connection is not present.
Indicator LED color and
behavior
LED behavior description
(2 of 2)
Release 06.02.01 | September 2019 | Edition 01