Product Guide
Table Of Contents
- 7368 ISAM ONT G-140W-H Product Guide
- 1 Preface
- Table of contents
- List of figures
- List of tables
- 2 ETSI ONT safety guidelines
- 3 ETSI environmental and CRoHS guidelines
- 4 ANSI ONT safety guidelines
- 5 G-140W-H unit data sheet
- 5.1 G-140W-H part numbers and identification
- 5.2 G-140W-H general description
- 5.3 G-140W-H software and installation feature support
- 5.4 G-140W-H interfaces and interface capacity
- 5.5 G-140W-H LEDs
- 5.6 G-140W-H detailed specifications
- 5.7 G-140W-H GEM ports and T-CONTs
- 5.8 G-140W-H performance monitoring statistics
- 5.9 G-140W-H functional blocks
- 5.10 G-140W-H standards compliance
- 5.11 G-140W-H special considerations
- 6 Install a G-140W-H indoor ONT
- 7 Replace a G-140W-H indoor ONT
- 8 Configure a G-140W-H indoor ONT
- 9 ONT configuration file over OMCI
- Customer document and product support
Configure a G-140W-H indoor ONT
90
7368 ISAM ONT G-140W-H Product Guide
3FE-48054-AAAA-TCZZA Issue: 01
Procedure 13 Voice information retrieval
1 Select Status > Voice Information from the top-level menu in the GPON Home Gateway
window, as shown in Figure 28.
Figure 28 Voice Information window
Table 23 describes the fields in the Voice Information window.
Table 23 Voice Information parameters
Field Description
Line Choose a line from the drop-down menu. The default is
Line 1.
Line Status Depending on the line chosen, the line options are:
• Up
• Initializing
• Registering
• Unregistering
• Error
• Testing
• Quiescent
• Disabled
The default is Disabled
Soft Switch
(1)
Proxy IP address; blank if the line is not registered
Phone number
(1)
Phone number configured for a telephone line 1;
+13290611266
(1 of 2)
Release 06.02.01 | September 2019 | Edition 01