Nokia Wireless Headset (HS-26W) User Guide
DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product HS-26W is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/ declaration_of_conformity/. The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life. Do not dispose of these products as unsorted municipal waste.
contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice. The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you. Unauthorized changes or modifications to this device may void the user's authority to operate the equipment. Export Controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries.
Contents 1. Introduction ...................................................................................................... 5 Bluetooth wireless technology ............................................................................................................... 5 2. Get started ........................................................................................................ 6 Overview...........................................................................................................
1. Introduction You can connect the Nokia Wireless Headset (HS-26W) to a compatible phone that supports Bluetooth wireless technology. This allows you freedom to make and receive calls while on the move or in the office. Read this user guide carefully before using the headset. Read also the user guide for your phone, which provides important safety and maintenance information. Keep the headset out of reach of small children.
2. Get started ■ Overview The headset contains the following parts as shown in the figure: • Power key (1) switches the headset on and off. • Earphone (2) relays the caller’s voice. • Indicator light (3) displays the current status of the headset. • Volume key (4) increases or decreases the earphone volume during a call. To mute or unmute the ongoing call, press the middle part of the volume key briefly. • Microphone (5) picks up your voice. Copyright © 2005 Nokia. All rights reserved.
• Answer/end key (6) answers or ends a call. This key can also be used for voice dialing, redialing, and switching an active call between the headset and the compatible phone. • Charger connector (7) Before you can start using the headset, you must charge the battery and pair the headset with a compatible phone. Note: Parts of the headset are magnetic. Metallic materials may be attracted to the headset, and persons with a hearing aid should not hold the headset to the ear with the hearing aid.
1. Connect the charger cable to the headset as shown in the figure. 2. Connect the charger to a wall outlet. The red indicator light is displayed during charging. Charging the battery fully may take up to 2 hours. 3. When the battery is fully charged, the green indicator light is displayed. Disconnect the charger from the wall outlet and the headset. The fully charged battery has power for up to 5 hours of talk-time or up to 150 hours of standby time.
2. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices. See the user guide of your phone for instructions. 3. Select the headset (Nokia HS-26W) from the list of found devices. 4. Enter the passcode 0000 to pair and connect the headset to your phone. In some phones you may need to make the connection separately after pairing. See the user guide of your phone for details. You only need to pair the headset with your phone once. 5.
You can set your phone to connect with the headset automatically when the headset is switched on. To do this in Nokia phones, change your paired device settings in the Bluetooth menu. ■ Troubleshooting If you cannot connect the headset to your phone, do as follows: • Ensure that the headset is charged, switched on, paired with and connected to your phone. • Ensure that the Bluetooth feature is activated on your phone.
3. Basic use ■ Place the headset on the ear Slide the headset onto your ear as shown in the figure.. ■ Call handling To make a call, use your phone in the normal way when the headset is connected to your phone. If your phone supports redialing, press the answer/end key twice briefly while no call is in progress. If your phone supports voice dialing, press and hold the answer/end key when no call is in progress, and proceed as described in the user guide of your phone. Copyright © 2005 Nokia.
To answer a call, press the answer/end key, or use the phone keys. If the automatic answer function is set on in your phone, the phone automatically answers the incoming call after one ring. To reject an incoming call, briefly press the answer/end key twice. To end a call, press the answer/end key, or use the phone keys. ■ Adjust the earphone volume Press the volume key up to increase or down to decrease the volume during a call.
The phone that was first paired with the headset is the default phone. If the headset is switched on within 10 meters (30 feet) of several paired phones, the headset tries to connect to the default phone. If the headset cannot connect to the default phone, the headset tries to connect to the last used phone. If the headset cannot connect to this phone either, start the connection from the desired phone.
4. Battery information Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with Nokia approved chargers designated for this device. Unplug the charger from the electrical plug and the device when not in use.
Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage. • Keep all accessories and enhancements out of the reach of small children. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow the device to dry completely.
