Nokia N96 User Guide Issue 1
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RM-247 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http:// www.nokia.com/phones/declaration_of_conformity/. © 2008 Nokia. All rights reserved. Nokia, Nokia Connecting People, Nseries, N96, N-Gage, Navi, Visual Radio, and Nokia Care are trademarks or registered trademarks of Nokia Corporation.
Reverse engineering of any software in the Nokia device is prohibited to the extent permitted by applicable law. Insofar as this user guide contains any limitations on Nokia's representations, warranties, damages and liabilities, such limitations shall likewise limit any representations, warranties, damages and liabilities of Nokia's licensors. The availability of particular products and applications and services for these products may vary by region.
Contents Contents Safety.........................................................11 About your device.........................................................11 Network services...........................................................12 Get started.................................................13 Keys and parts (front)...................................................13 Keys and parts (back and sides)..................................14 Keys and parts (media)........................................
Change the look of your device...................................39 Set tones in Profiles......................................................39 3-D tones........................................................................40 Modify the standby mode............................................41 Modify the main menu.................................................41 TV and video..............................................42 Nokia Video Centre........................................................
Contents Scenes..........................................................................68 Capture images in a sequence..................................68 You in the picture—self-timer..................................69 Tips on taking good photographs............................69 Video recording.............................................................70 Video capture indicators...........................................70 Record videos.............................................................
Media folder.............................................102 RealPlayer ...................................................................102 Play video clips.........................................................102 Stream content over the air....................................102 RealPlayer settings...................................................103 Licences........................................................................103 Recorder..........................................................
Contents Write and send messages..........................................125 Messaging inbox.........................................................127 Receive messages....................................................127 Multimedia messages..............................................127 Data, settings, and web service messages............128 Message reader...........................................................128 Mailbox.........................................................................
Applications folder...................................153 Calculator.....................................................................153 Application manager..................................................153 Install applications and software ..........................154 Remove applications and software........................155 Settings.....................................................................155 Tools folder..............................................157 File manager................
Contents Implanted medical devices.....................................184 Hearing aids..............................................................185 Vehicles........................................................................185 Potentially explosive environments.........................186 Emergency calls...........................................................186 CERTIFICATION INFORMATION (SAR)...........................187 Index........................................................
Safety Safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
Safety downloads. Only install and use services and other software from trustworthy sources that offer adequate security and protection against harmful software, such as applications that are Symbian Signed or have passed the Java Verified™ testing. Consider installing antivirus and other security software on your device and any connected computer. Your device may have preinstalled bookmarks and links for third-party internet sites. You may also access other third-party sites through your device.
Keys and parts (front) 1 — Lock switch 2 — Nokia AV Connector (3.
Get started Keys and parts (back and sides) 1 and 4 — Stereo speakers with 3-D sound effect 2 — Zoom/Volume key 3 — 2-stage capture key for auto-focus, still image capture, and video recording 5 — Main camera for high resolution (up to 5 megapixels) image capture and video recording 6 — Flash and video light 7 — Memory card slot for a compatible microSD card 8 — Hole for a wrist strap 14 Keys and parts (media) 1 — Forward 2 — Play/Pause; can also be used for playing games 3 — Stop; can also be used
2. To release the SIM card holder, lift the holder up using the handle. 3. Insert the SIM card into the card holder. Ensure that the bevelled corner on the card is facing toward the slot, and that the contact area on the card is facing down. 4. Close the holder, and lock it into place. 5. Insert the battery. 6. To replace the cover, direct the bottom locking catches toward their slots, and press until the cover locks into place. Get started 1.
Get started 2. If the device asks for a PIN code or lock code, enter it, and press the left selection key. The factory setting for the lock code is 12345. Your device may have internal and external antennas. As with any radio transmitting device, avoid touching the antenna area unnecessarily while the antenna is transmitting or receiving.
Use only compatible microSD cards approved by Nokia for use with this device. Nokia uses approved industry standards for memory cards, but some brands may not be fully compatible with this device. Incompatible cards may damage the card and the device and corrupt data stored on the card. Insert the memory card Keep all memory cards out of the reach of small children. A memory card may be already inserted in the device. If not, do the following: 1.
Get started 3. When Remove memory card and press 'OK' is displayed, open the door of the memory card slot. 4. Press the memory card to release it from the slot. 5. Pull out the memory card. If the device is switched on, select OK.
Your device supports the following connectivity methods: ● 2G and 3G networks ● Bluetooth connectivity — to transfer files and connect to compatible enhancements. See "Bluetooth connectivity", p. 115. Get connected Get connected ● Nokia AV connector (3.5 mm) — to connect to compatible headsets, headphones, home stereo sets, or TVs ● USB data cable — to connect to compatible devices, such as printers and PCs. See "USB", p. 118. ● Wireless LAN (WLAN) — to connect to the internet and WLAN enabled devices.
Find help Find help Instructions inside - Indevice help Your device contains instructions to help you use it. When an application is open, to access the help text for the current view, select Options > Help. To open help from the main menu, select Tools > Utilities > Help, and the relevant application. You can find links to related topics at the end of the help text. To make the instructions easier to read, you can change the size of the text.
Software updates Nokia may produce software updates that may offer new features, enhanced functions, or improved performance. You may be able to request these updates through the Nokia Software Updater PC application. Software updates may not be available for all products or their variants. All operators may not endorse the latest software versions available.
Find help 22 ● Personal identification number (PIN) code — This code protects your SIM card against unauthorised use. The PIN code (4 to 8 digits) is usually supplied with the SIM card. After three consecutive incorrect PIN code entries, the code is blocked, and you need the PUK code to unblock it. ● UPIN code — This code may be supplied with the USIM card. The USIM card is an enhanced version of the SIM card and is supported by UMTS mobile phones.
● If you have set Packet data connection to When available in connection settings, and there is no packet data coverage (GPRS), the device periodically tries to establish a packet data connection. To prolong the operating time of your device, select Packet data connection > When needed. ● The Maps application downloads new map information when you scroll to new areas on the map, which increases the demand on battery power. You can prevent the automatic download of new maps. See "Maps", p. 95.
Find help the desired memory, and Options > Details > Memory. To free device memory or mass memory, transfer data to a compatible memory card (if available) or to a compatible PC. To remove data you no longer need, use File manager or go to the respective application.
Model number: N96-1. Hereinafter referred to as N96. Antenna locations Your device may have internal and external antennas. As with any radio transmitting device, avoid touching the antenna area unnecessarily while the antenna is transmitting or receiving. Contact with such an antenna affects the communication quality and may cause the device to operate at a higher power level than otherwise needed and may reduce the battery life.
Your device To access the Welcome application later, press , and select Tools > Utilities > Welcome. You can also access the individual applications from their menu locations. Nokia Switch Transfer content You can use the Switch application to copy content such as phone numbers, addresses, calendar items, and images from your previous Nokia device to your Nokia N96 using Bluetooth connectivity.
After the first transfer, select from the following to start a new transfer, depending on the model of the other device: to synchronise content between your Nokia N96 and the other device, if the other device supports synchronisation. The synchronisation is two-way. If an item is deleted in one device, it is deleted in both. You cannot restore deleted items with synchronisation. to retrieve content from the other device to your Nokia N96.
Your device You have received new e-mail in the remote mailbox. There are messages waiting to be sent in the Outbox folder. You have missed calls. The ringing type is set to silent, and the message alert tone and e-mail alert tone are set to off. A timed profile is active. The device keypad is locked. A clock alarm is active. The second phone line is being used (network service). All calls to the device are diverted to another number (network service).
Shortcuts When in the menus, instead of using the scroll key, you can use the number keys, #, and * to quickly access the applications. For example, in the main menu, press 2 to open Messaging, or # to open the application or folder in the corresponding location in the menu. To switch between open applications, press and hold . Leaving applications running in the background increases the demand on battery power and reduces the battery life.
Your device 1. To open or close the multimedia menu, press the multimedia key. 2. To browse the tiles, scroll left or right. The tiles are the following: 30 ● TV & video — View your last watched TV channel or video clip, view Live TV or video clips stored on your device, or access video services. ● Music — Enter Music player and the Now playing view, browse your songs and playlists, or download and manage podcasts.
To search content in your device, in the main view, enter your text to the search field. The search results are displayed on the screen as you write. N-Gage About N-Gage N-Gage is a mobile gaming platform available for a range of compatible Nokia mobile devices. You can access N-Gage games, players, and content through the N-Gage application on your device. You can also download games and access some features on your computer at www.n-gage.com.
Your device available to play. You can also send messages to your N-Gage friends. In Showroom, you can find information about N-Gage games, including screenshots and player reviews. You can also try out new games by downloading game trials, or enhance your gaming experience with game extras for games already on your device. Get started Create a player name You can download, purchase, and play games without a player name, but creating one is recommended.
To connect with N-Gage players on your friends list and to invite them to a game, select Play With Friends. N-Gage suggests a friend to play with based on your previous gaming history and the availability of your N-Gage friends. To find a different friend to play with, select Options > View My Friends. This item is not displayed if your friends list is empty. See "Connect with other players", p. 34.
Your device ● Motto — Add a short personal message. To edit the text, select Change. ● Favorite Game(s) — Enter the names of your favourite games. ● Device Model — The model number of your device. This is defined automatically and cannot be edited. ● Show Location — Select whether to display your city and country in your public profile. You can change your location in the private tab.
In My friends, you can send private messages to players in your friends list. If your friend is currently logged in to the N-Gage service, the friend can respond to your message, and you can chat one-onone. To view new messages received from an N-Gage friend, scroll to the friend on your friends list, and select Options > View Message. Read messages are deleted automatically when you exit N-Gage. To view game recommendations, select Options > View Recommendation.
Your device Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety. Some headsets come in two parts, a remote control unit and headphones. A remote control unit has a microphone and keys to answer or end a phone call, adjust the volume, and play music or video files. To use the headphones with a remote control unit, connect the unit to the Nokia AV Connector (3.
To use the loudspeaker during a call, press Loudsp.. To turn off the loudspeaker, press Handset. Offline profile To activate the offline profile, press the power key briefly, and select Offline. Or, press , and select Tools > Profiles > Offline. The offline profile lets you use the device without connecting to the wireless network. When you activate the offline profile, the connection to the wireless network is turned off, as indicated by in the signal strength indicator area.
Your device 38 For availability and subscription to data connection services, contact your service provider. HSDPA only affects the download speed; sending data to the network, such as messages and e-mail, is not affected.
You can personalise your device by changing the standby mode, main menu, tones, themes, or font size. Most of the personalisation options, such as changing the font size, can be accessed through the device settings. See "Personalisation settings", p. 161. is not inserted in the device. If you want to use the themes saved in the memory card without the memory card, save the themes in the device memory or mass memory first.
Personalise your device To change the profile, select a profile, and Options > Activate, or press the power key in the standby mode. Scroll to the profile you want to activate, and select OK. Tip: To switch between the general and silent profiles in the standby mode, press and hold #. To modify a profile, scroll to the profile, and select Options > Personalise. Scroll to the setting you want to change, and press the scroll key to open the choices.
To adjust the ringing tone volume, select Tools > Profiles > Options > Personalise > Ringing volume. Modify the standby mode To change the look of the standby mode, press , and select Tools > Settings > General > Personalisation > Standby mode > Standby theme. The active standby display shows application shortcuts, and events from applications such as calendar and player.
TV and video TV and video Nokia Video Centre With Nokia Video Centre (network service), you can download and stream video clips over the air from compatible internet video services using packet data or WLAN. You can also transfer video clips from a compatible PC to your device and view them in Video Centre. Using packet data access points to download videos may involve the transmission of large amounts of data through your service provider's network.
Schedule downloads Setting the application to download video clips automatically may involve the transmission of large amounts of data through your service provider's network. Contact your service provider for information about data transmission charges. To schedule an automatic download for video clips in a service, select a category and Options > Schedule downloads. Video centre automatically downloads new video clips daily at the time you define.
TV and video is playing, use the media keys. To adjust the volume, press the volume key. To view file details, select Options > Video details. To play a downloaded video clip in the home network, select Options > Show via home network. Home network must be configured first. See "About home network", p. 84. To move video clips to other folders in your device, select Options > Move to folder. To create a new folder, select New folder.
Live TV About Live TV Your device has an integrated Digital Video Broadcast - Handheld (DVB-H) receiver, which enables it to receive digital TV broadcasts. With Live TV, you can access mobile television and radio services (network service) and watch and listen to digital TV programmes. If you do not have access to a Live TV service, the operators in your area may not support Live TV services. Live TV services may only be available upon subscription.
TV and video If the device cannot find any programme guides when you open Live TV, select Options > Rescan to search for the available programme guides. Select one of the guides. Live TV uses a large amount of device memory to store the programme guide. The device attempts to update the programme guide periodically even if Live TV is not on. If there is not enough memory for the update, the device notifies you that device memory is low.
Additional charges may apply for using the network required to access the services. Programme guides To view the current programme guide, select Options > Programme guide. To change the channel in the programme guide, scroll right or left. To view programmes, scroll up or down. Programmes are arranged according to their start times. To watch the currently running programme, select Options > Watch programme. To set a reminder for an upcoming programme, select Options > Remind.
TV and video To stop recording, select Options > Stop recording. You can record a programme in the background while using the device for something else. To stop recording, open Live TV, and select Options > Stop recording. To start recording a programme shown in the programme guide, select the programme from the list and Options > Record programme. To adjust the recording time, modify the settings accordingly. See "Live TV Settings", p. 49.
2. To view the details of an item, scroll to the item, and select Options > Item details. 3. To end your continuous subscription to the selected item, select Options > Unsubscribe. Live TV Settings Select Options > Settings, and define the following: ● System status — View the general status of the Live TV and the signal strength. To update the signal strength indicator, close this dialog, and open it again. ● Channel order — Change the default channel order.
TV and video To watch images and video clips on TV, do the following: 1. Connect a Nokia Video Connectivity Cable to the video input of a compatible TV. 2. Connect the other end of the Nokia Video Connectivity Cable to the Nokia AV Connector of your device. 3. You may need to select the cable mode. 4. Press , select Gallery and browse for the file you want to view. For all applications other than the folders in Photos, the TV screen displays what is displayed on the screen of your device.
Music player Tip: You can access the Music player from the multimedia menu. Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. Music player supports files formats such as AAC, AAC +, eAAC+, MP3, and WMA. Music player does not necessarily support all features of a file format or all the variations of file formats.
Music folder To fast forward or rewind, press and hold . or To go to the next item, press . To return to the beginning of the item, press . To skip to the previous item, press again within 2 seconds after a song or podcast has started. To switch random play ( Options > Shuffle. ) on or off, select To repeat the current item ( ), all items ( ), or to switch repeat off, select Options > Repeat. If you play podcasts, shuffle and repeat are automatically switched off.
To show the song list under an artist title, scroll right. To hide the song list, scroll left. 5. When you have made your selections, select Done. The playlist is saved to the mass memory of your device. To add more songs later, when viewing the playlist, select Options > Add songs. To add songs, albums, artists, genres, and composers to a playlist from the different views of the music menu, select an item and Options > Add to playlist > Saved playlist or New playlist.
Music folder network. Content sharing does not have to be switched on in the home network settings. See "Set sharing on and define content", p. 86. Transfer music to your device You can transfer music from a compatible PC or other compatible devices using a compatible USB data cable or Bluetooth connectivity. PC requirements for music transfer: ● Microsoft Windows XP operating system (or later) ● A compatible version of the Windows Media Player application.
2. In the left navigation pane, browse the music files on your PC which you want to synchronise. 3. Drag and drop songs to the Sync List on the right. You can see the amount of available memory in your device above the Sync List. 4. To remove songs or albums, select an item in the Sync List, right-click, and select Remove from list.
Music folder Nokia Music Store settings The availability and appearance of the music store settings may vary. The settings may also be predefined and not editable. If the settings are not predefined, you may be asked to select the access point to use when connecting to the music store. To select the access point, select Default access point. In the music store, you may be able to edit the settings by selecting Options > Settings.
Setting the application to retrieve podcasts automatically may involve the transmission of large amounts of data through your service provider’s network. Contact your service provider for information about data transmission charges. To restore the default settings, select Options > Restore default in the settings view. Search podcasts Search helps you to find podcasts by keyword or title.
Music folder To add a new directory or folder, select Options > New > Web directory or Folder. Select a title, URL of the .opml (outline processor markup language) file, and Done. To edit the selected folder, web link, or web directory, select Options > Edit. To import an .opml file stored on your device, select Options > Import OPML file. Select the location of the file, and import it.
To edit the URL of the selected podcast, select Options > Edit. To delete a downloaded podcast or marked podcasts from your device, select Options > Delete. To send the selected podcast or marked podcasts to another compatible device as .opml files as a multimedia message or by Bluetooth connectivity, select Options > Send. FM radio You can use the radio as a traditional FM radio and automatically tune into and save stations.
Music folder You can make a call or answer an incoming call while listening to the radio. The radio is muted when there is an active call. To start a station search, select or . To change the frequency manually, select Options > Manual tuning. If you have saved radio stations in your device, to go to the next or previous saved station, select or . To adjust the volume, use the volume key. Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing.
Your device can display the identity name of the FM station to which you are tuned if the name is being transmitted by the station. Nokia Internet Radio With the Nokia Internet Radio application (network service), you can listen to available radio stations on the internet. To listen to radio stations, you must have a WLAN or packet data access point defined in your device. Listening to the stations may involve the transmission of large amounts of data through your service provider's network.
Music folder To view station information, select Options > Station information (not available if you have saved the station manually). If you are listening to a station saved in your favourites, scroll left or right to listen to the previous or next saved station. Favourite stations To view and listen to your favourite stations, press , and select Music > Radio > Internet radio > Favourites. To add a station manually to favourites, select Options > Add station manually.
Internet radio settings Press , and select Music > Radio > Internet radio > Options > Settings. To select the default access point to connect to the network, select Default access point and from the available options. Select Always ask if you want the device to ask for the access point every time you open the application. Music folder ● Top stations — View the most popular stations in the directory.
Camera Camera About the camera Your Nokia N96 has two cameras. The main, highresolution camera (up to 5 megapixels), is on the back of the device. The secondary, lower resolution camera is on the front. You can use both cameras to capture images and record videos. Your device supports an image capture resolution of 2592x1944 pixels. The image resolution in this guide may appear different. The images and video clips are automatically saved in Photos. See "Photos", p. 75.
The settings in the active toolbar return to the default settings after you close the camera. 1 — Capture mode indicator 2 — Active toolbar (not displayed during image capture). See "Active toolbar", p. 65.
Camera to adjust the exposure compensation (images only) to adjust sharpness (images only) to adjust contrast (images only) to adjust light sensitivity (images only) The icons change to reflect the current setting. Saving the captured image may take longer if you change the zoom, lighting, or colour settings. See "After taking a picture", p. 67. See "After recording a video", p. 71. The active toolbar in Photos has different options. See "Active toolbar", p. 76.
You can automatically add capture location information to the file details of the captured material. For example, in the Photos application you can then view the location where an image was captured. To add location information to all captured material, in Camera, select Options > Settings > Record location > On. Location information indicators at the bottom of the display: — Location information unavailable. GPS stays on in the background for several minutes.
Camera To return to the viewfinder to capture a new image, press the capture key. Flash The flash is available only in the main camera. The camera of your device has an LED flash for low light conditions. Select the desired flash mode from the active toolbar: Automatic ( ), Red-eye ( ), On ( ), and Off ( ). Scenes Scenes are only available in the main camera. A scene helps you to find the right colour and lighting settings for the current environment.
To switch off the sequence mode, in the active toolbar, select Sequence mode > Single shot. You in the picture—self-timer The self-timer is available only in the main camera. Use the self-timer to delay the capture so that you can include yourself in the picture. To set the self-timer delay, in the active toolbar, select Self timer > 2 seconds, 10 seconds, or 20 seconds. To activate the self-timer, select Activate.
Camera Changing the source, amount, and direction of light can change photographs dramatically. Here are some typical lighting conditions: ● Light source behind the subject. Avoid placing your subject in front of a strong light source. If the light source is behind the subject or visible in the display, the resulting picture may have weak contrast, may be too dark, and may contain unwanted light effects. ● Sidelit subject.
Record videos 1. If the camera is in the image mode, select the video mode from the active toolbar. 2. To start recording, press the capture key. The red record icon ( ) is displayed and a tone sounds. 3. To pause recording at any time, press Pause. Select Continue to resume. If you pause recording and do not press any key within one minute, the recording stops. To zoom in or out of the subject, use the zoom key in your device. 4. To stop recording, press the capture key.
Camera an account for a compatible online album). See " Share images and videos online ", p. 80. ● To return to the viewfinder to record a new video clip, press the capture key. ● Camera settings ● There are two kinds of settings for the camera: setup settings and main settings. The setup settings return to the default settings after you close the camera, but the main settings remain the same until you change them again. To adjust the setup settings, use the options in the active toolbar.
In the active toolbar, select from the following: ● Flash mode ( ) (image only) — Select the desired flash mode. ● Colour tone ( ) — Select a colour effect. — Switch the video light on or off ● Video light (video mode only). ● White balance ( ) — Select the current lighting condition. This allows the camera to reproduce colours more accurately.
Camera 74 ● Add to album — Add the recorded video clip to an album in Photos. ● Show captured video — Select to view the first frame of the recorded video clip after the recording stops. To view the entire video clip, select Play from the active toolbar (main camera) or Options > Play (secondary camera). ● Default video name — Enter the default name for captured video clips. ● Memory in use — Select where you want to store your video clips.
Photos Photos About Photos Press , select Photos and from the following: ● Captured — to show all the photos and videos you have taken ● Months — to show photos and videos categorised by the month they where taken ● Albums — to show the default albums and those you have created ● Tags — to show tags you have created for each item ● Downloads — to show items and videos downloaded from the web or received via MMS or email ● All — to view all items To open a file, press the scroll key.
Photos To edit an image, select Options > Edit. See "Edit images", p. 78. To see where an image marked with was captured, select Options > Show on map. View and edit file details To view and edit image or video properties, select Options > Details > View and edit and from the following: 76 ● Tags — Contains currently used tags. Select Add to add more tags to the current file. See "Tags", p. 77. ● Description — To add a free-form description of the file, select the field.
to send the selected image or video clip to upload the selected image or video clip to a compatible online album (only available if you have set up an account for a compatible online album). See " Share images and videos online ", p. 80. to add the selected item to an album to manage tags and other properties of the selected item to delete the selected image or video clip Albums With albums, you can conveniently manage your images and video clips.
Photos forwards or Play backwards to start the slide show. The slide show starts from the selected file. To view only the selected images as a slide show, select Options > Mark/Unmark > Mark to mark images, and Options > Slide show > Start > Play forwards or Play backwards to start the slide show. Select from the following: ● Pause — to pause the slide show ● Continue — to resume the slide show, if paused ● End — to close the slide show To browse the images, scroll left or right.
Reduce red-eye To reduce red-eye in an image, select Options > Apply effect > Red eye reduction. Move the cross onto the eye, and press the scroll key. A loop appears on the display. To resize the loop to fit the size of the eye, use the scroll key. To reduce the redness, press the scroll key. When you have finished editing the image, press Done. To save the changes and return to the previous view, press Back.
Photos If the default printer is not available, a list of available printers is displayed. To change the default printer, select Options > Settings > Default printer. Print preview After you select the printer, the selected images are displayed using predefined layouts. To change the layout, scroll left or right to browse through the available layouts for the selected printer. If the images do not fit on a single page, scroll up or down to display the additional pages.
Photos To upload a file from Photos to the online service, press , and select Photos. Select an album, scroll to the desired file, and select Options > Send > Post to web, or select the file and from the active toolbar. For more information on the application and compatible service providers, see the Nokia product support pages or your local Nokia website.
Gallery Gallery To access your images, video clips, and songs, or store and organise sound clips and streaming links, press , and select Applications > Media > Gallery. Main view Press , and select Applications > Media > Gallery, and from the following: ● Images — to view images and videos in Photos. See "About Photos", p. 75. ● Video clips — to view videos in Video centre — to open Music player. See "Music ● Songs player", p. 51.
Presentations Gallery To add a new streaming link, select Options > New link. With presentations, you can view SVG (scalable vector graphics) files, such as cartoons and maps. SVG images maintain their appearance when printed or viewed with different screen sizes and resolutions. To view SVG files, press , and select Applications > Media > Gallery > Presentations. Scroll to an image, and select Options > Play. To pause playing, select Options > Pause. To zoom in, press 5. To zoom out, press 0.
Home network Home network About home network Your device is compatible with Universal Plug and Play (UPnP) and certified by Digital Living Network Alliance (DLNA). You can use a wireless LAN (WLAN) access point device or a WLAN router to create a home network. Then you can connect compatible UPnP devices that support WLAN to the network.
When you configure your WLAN home network, enable an encryption method on your access point device, then on the other devices you intend to connect to your home network. Refer to the documentation of the devices. Keep any passcodes secret and in a safe place separate from the devices. You can view or change the settings of the WLAN internet access point in your device. See "Access points", p. 169.
Home network ● Home access point — Select Always ask if you want the device to ask for the home access point every time you connect to the home network, Create new to define a new access point that is used automatically when you use the home network, or None. If your home network does not have WLAN security settings enabled, you get a security warning. You can continue and switch the WLAN security on later; or cancel defining the access point and first switch on the WLAN security. See "Access points", p.
3. To stop sharing, select Options > Stop showing. Show media files stored in the other device To show media files that are stored on another home network device in your device (or in a compatible TV, for example), do the following: 1. Press , and select Tools > Connectivity > Home media > Browse home. Your device starts the search of other compatible devices. Device names start to appear on the display. 2. Select a device from the list. 3. Select the type of media you want to view from the other device.
Home network that your mobile device is within range of your home WLAN and the home network has been set up. To set up home synchronisation, select > Tools > Connectivity > Home media > Home sync, and complete the wizard. To run the wizard later, in Home synchronisation main view, select Options > Run wizard. To manually synchronise content in your mobile device with content in your home devices, select Sync now.
To change the priority order of the lists, select Options > Change priority. Select the list you want to move andGrab, move the list to the new location, and select Drop to place it there. Define outgoing files Home network To create a predefined or customised list for incoming files, select Options > New list.
Positioning (GPS) Positioning (GPS) You can use applications such as Maps and GPS data to find out your location, or measure distances and coordinates. These applications require a GPS connection. About GPS The Global Positioning System (GPS) is a worldwide radio navigation system that includes 24 satellites and their ground stations that monitor the operation of the satellites. Your device has an internal GPS receiver.
When you activate A-GPS, your device receives useful satellite information from an assistance data server over the cellular network. With the help of assisted data, your device can obtain the GPS position faster. Your device is preconfigured to use the Nokia A-GPS service, if no service provider-specific A-GPS settings are available. The assistance data is retrieved from the Nokia A-GPS service server only when needed.
Positioning (GPS) ● Some vehicles have tinted (athermic) windows, which may block the satellite signals. Check satellite signal status To check how many satellites your device has found, and whether your device is receiving satellite signals, press , and select Tools > Connectivity > GPS data > Position > Options > Satellite status. If your device has found satellites, a bar for each satellite is shown in the satellite info view. The longer the bar, the stronger the satellite signal.
To edit or add information to a saved landmark (for example, a street address), scroll to a landmark, and select Options > Edit. Scroll to the desired field, and enter the information. You can sort your landmarks into preset categories, and create new categories. To edit and create new landmark categories, scroll right in Landmarks, and select Options > Edit categories. To add a landmark to a category, scroll to the landmark in Landmarks, and select Options > Add to category.
Positioning (GPS) measured in a straight line. Any obstacles on the route, such as buildings and natural obstacles, are ignored. Differences in altitude are not taken into account when calculating the distance. Route guidance is active only when you move. To set your trip destination, select Options > Set destination and a landmark as the destination, or enter the latitude and longitude coordinates. Select Stop navigation to clear the destination set for your trip.
Maps Maps About Maps Press , and select Maps. With Maps, you can see your current location on the map, browse maps for different cities and countries, search for addresses and different points of interest, plan routes from one location to another, view traffic details, and save locations as favourites and send them to compatible devices. You can also purchase extra services, such as guides, a turn-by-turn Drive & Walk navigation service with voice guidance, and a traffic information service.
Maps To receive a note when your device registers to a network outside your home cellular network, select Options > Tools > Settings > Internet > Roaming warning > On (shown only when you are online). Contact your network service provider for details and roaming costs. Almost all digital cartography is inaccurate and incomplete to some extent. Never rely solely on the cartography that you download for use in this device. Browse maps The map coverage varies by country.
The maps are automatically saved in the mass memory or on a compatible memory card (if inserted and set as the default maps storage). To zoom in or out, press * or #. Use the scale bar to estimate the distance between two points on the map. Adjust the map view To define the metric system used in the maps, select Options > Tools > Settings > Map > System of measurement > Metric or Imperial.
Maps saved maps data can be deleted using Nokia Map Loader PC software. Nokia Map Loader Nokia Map Loader is PC software that you can use to download and install maps from the internet to your device or a compatible memory card. You can also use it to download voice files for turn-by-turn navigation. To use Nokia Map Loader, you must first install it to a compatible PC. You can download the PC software from the internet at www.nokia.com/maps. Follow the instructions on the screen.
To take a screen shot of your location, select Options > Tools > Save map screen shot. The screen shot is saved in Photos. To send the screen shot, open Photos, and select the send option from the active toolbar or the options menu, and the method. To view your browsing history, places you have viewed on a map, and routes and collections you have created, select Options > Favourites, and the desired option.
Maps Options > Extras > Drive & Walk or Walk. You can pay for the service through an accepted credit card or have the amount charged to your phone bill (if supported by your cellular network service provider). Drive navigation To purchase a Drive & Walk navigation service, select Options > Extras > Drive & Walk. When you use drive navigation for the first time, you are prompted to select the language of the voice guidance and download the voice guidance files of the selected language.
To purchase a licence for a real-time traffic information service, select Options > Extras > Traffic info. The service provides information about traffic events that may affect your travel. Downloading extra services may involve the transmission of large amounts of data through your service provider’s network. Contact your service provider for information about data transmission charges.
Media folder Media folder RealPlayer With RealPlayer, you can play video clips or stream media files over the air without saving them to the device first. RealPlayer supports files with extensions such as . 3gp, .mp4, or .rm. However, RealPlayer does not necessarily support all file formats or all the variations of file formats. When playback is active, in the landscape view, use the media keys to control the player. Play video clips Press , and select Applications > Media > RealPlayer.
RealPlayer settings Press , and select Applications > Media > RealPlayer. You may receive RealPlayer settings in a special message from the service provider. For more information, contact your service provider. Select Options > Settings and from the following: ● Video — Select whether video clips are played in full screen or in the normal view, and whether the clips are automatically repeated after they finish playing.
Media folder Suite.Other transfer methods may not transfer the activation keys which need to be restored with the content for you to be able to continue the use of OMA DRM-protected content after the device memory is formatted. You may also need to restore the activation keys in case the files on your device get corrupted. If your device has WMDRM-protected content, both the activation keys and the content will be lost if the device memory is formatted.
With the Web browser, you can view hypertext markup language (HTML) web pages on the internet as originally designed. You can also browse web pages that are designed specifically for mobile devices, and use extensible hypertext markup language (XHTML), or the wireless markup language (WML). To browse the web, you need to have an internet access point configured in your device. Browse the web Press , and select Web. Shortcut: To start the browser, press and hold 0 in the standby mode.
Web browser browser settings and the current web page is not the first web page you visit). Select the web page you want. To save a web page while browsing, select Options > Tools > Save page. You can save web pages and browse them later when offline. You can also group web pages into folders. To access the web pages you have saved, select Saved pages in the Web browser main view.
Mini Map and page overview help you navigate web pages that contain a large amount of information. When Mini Map is set on in the browser settings and you scroll through a large web page, Mini Map opens and shows an overview of the web page you browse. To set Mini Map on, select Options > Settings > General > Mini map > On. To move in Mini Map, scroll left, right, up, or down. When you find the desired location, stop scrolling. Mini Map disappears and leaves you at the selected location.
Web browser The default access point for widgets is the same as in the web browser. When active in the background, some widgets may update information automatically to your device. Using widgets may involve the transmission of large amounts of data through your service provider's network. Contact your service provider for information about data transmission charges.
indicates the starting page defined for the default access point. You can save URL addresses as bookmarks while browsing on the internet. You can also save addresses received in messages to your bookmarks and send saved bookmarks. To open the bookmarks view while browsing, press 1, or select Options > Bookmarks. To edit the details of a bookmark, such as the title, select Options > Bookmark manager > Edit. In the bookmarks view, you can also open other browser folders.
Web browser Connection security If the security indicator ( ) is displayed during a connection, the data transmission between the device and the internet gateway or server is encrypted. The security icon does not indicate that the data transmission between the gateway and the content server (or the place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server.
Web browser ● Recently visited pages — Enable or disable automatic bookmark collecting. If you want to continue saving the addresses of the visited web pages into the Recently visited pages folder, but hide the folder from the bookmarks view, select Hide folder. ● Form data saving — If you do not want the data you enter to different forms on a web page to be saved and used the next time you open the page, select Off. ● Cookies — Enable or disable the receiving and sending of cookies.
Connections Connections Your device offers several options to connect to the internet or to another compatible device or PC. Wireless LAN Your device supports wireless local area network (WLAN). With WLAN, you can connect your device to the internet and compatible devices that have WLAN. About WLAN To use WLAN, it must be available in the location, and your device must be connected to the WLAN. Some WLANs are protected, and you need an access key from your service provider to connect to them.
When the device is in the offline profile, you can still use WLAN (if available). Remember to comply with any applicable safety requirements when establishing and using a WLAN connection. Tip: To check the unique media access control (MAC) address that identifies your device, enter *#62209526# in the standby mode. WLAN wizard The WLAN wizard helps you to connect to a WLAN and manage your WLAN connections. The WLAN wizard shows the status of your WLAN connections in the active standby mode.
Connections ● Edit access point — Edit the details of an existing IAP. You can also use connection manager to create internet access points. See "Active data connections", p. 114. Operating modes There are two operating modes in WLAN: infrastructure and ad hoc. The infrastructure operating mode allows two kinds of communication: wireless devices are connected to each other through a WLAN access point device, or wireless devices are connected to a wired LAN through a WLAN access point device.
About Bluetooth connectivity You can make a wireless connection to other combatible devices, such as mobile phones, computers, headsets, and car kits, with Bluetooth connectivity. You can use the connection to send images, video clips, music and sound clips, and notes, transfer files from your compatible PC, and print images with a compatible printer. Since devices with Bluetooth wireless technology communicate using radio waves, they do not need to be in direct line-of-sight.
Connections ● My phone's name — Edit the name shown to other devices with Bluetooth wireless technology. ● Remote SIM mode — To enable another device, such as a compatible car kit enhancement, to use the SIM card in your device to connect to the network, select On. See "Remote SIM mode", p. 118. Security tips Press , and select Tools > Bluetooth. When you are not using Bluetooth connectivity, to control who can find your device and connect to it, select Bluetooth > Off or My phone's visibility > Hidden.
To pair with compatible devices and view your paired devices, in the main view of Bluetooth connectivity, scroll right. Before pairing, create your own passcode (1 to 16 digits), and agree with the owner of the other device to use the same code. Devices that do not have a user interface have a factory-set passcode. The passcode is used only once. 1. To pair with a device, select Options > New paired device. Devices that are within range are displayed. 2. Select the device, and enter the passcode.
Connections To unblock a device, scroll right to Blocked devices, select a device, and Options > Delete. To unblock all blocked devices, select Options > Delete all. If you reject a pairing request from another device, you are asked if you want to block all future connection requests from this device. If you accept the query, the remote device is added to the list of blocked devices.
PC connections Connections ● Image transfer — Print images on a compatible printer. ● Media transfer — Synchronise music with Windows Media Player. You can use your device with a variety of compatible PC connectivity and data communications applications. With Nokia Nseries PC Suite you can, for example, transfer images between your device and a compatible PC. For information on Apple Macintosh support and connecting your device to an Apple Macintosh device, visit www.nseries.com/mac.
Time management Time management Clock Alarm clock Press , and select Applications > Clock. To set a new quick alarm, select Options > New quick alarm. Quick alarms are set for the next 24 hours and they cannot be repeated. To view your active and inactive alarms, scroll right to the alarm tab. To set a new alarm, select Options > New alarm. Define the repetition, if needed. When an alarm is active, is shown. To turn off the sounding alarm, select Stop.
Create a calendar entry Press , and select Applications > Calendar. 1. To add a new calendar entry, scroll to the desired date, and select Options > New entry and one of the following: ● Meeting — to remind you of an appointment that has a specific date and time ● Meeting request — to create and send a new meeting request. You must have a mailbox set up for sending requests. See "Manage mailboxes", p. 132.
Time management To switch between the month view, week view, day view, and to-do view, press *. To send a calendar note to a compatible device, select Options > Send. If the other device is not compatible with Coordinated Universal Time (UTC), the time information of received calendar entries may not be displayed correctly. Manage calendar entries To delete several events at a time, go to the month view, and select Options > Delete entry > Before date or All entries.
Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device. Messaging main view Press , and select Messaging (network service). To create a new message, select New message. Messaging contains the following folders: Inbox — Received messages, except e-mail and cell broadcast messages, are stored here. ● My folders — Organise your messages into folders.
Messaging Cell broadcast messages cannot be received in UMTS networks. A packet data connection may prevent cell broadcast reception. Write text Your device supports traditional text input and predictive text input. With predictive text, you can enter any letter with a single keypress. Predictive text input is based on a built-in dictionary to which you can add new words. When you write text, is displayed when you write text using traditional text input and when using predictive text input.
4. Start writing the next word. Tips on text input To insert a number in the letter mode, press and hold the desired number key. To switch between the different character modes, press #. To delete a character, press C. To delete more than one character, press and hold C. The most common punctuation marks are available under 1. To scroll them through one by one, if you use traditional text input, press 1 repeatedly. If you use predictive text input, press 1, and then * repeatedly.
Messaging connection settings in place. See "Define the e-mail settings", p. 128. The wireless network may limit the size of MMS messages. If the inserted picture exceeds this limit the device may make it smaller so that it can be sent by MMS. Check the size limit of email messages with your service provider. If you attempt to send an e-mail message that exceeds the size limit of the e-mail server, the message is left in the Outbox folder, and the device attempts to resend it periodically.
Your device supports text messages beyond the limit for a single message. Longer messages are sent as two or more messages. Your service provider may charge accordingly. Characters with accents or other marks, and characters from some language options, take up more space, and limit the number of characters that can be sent in a single message. You may not be able to send video clips that are saved in the MP4 file format or that exceed the size limit of the wireless network in a multimedia message.
Messaging If the message includes a multimedia presentation, is displayed. To play the presentation, select the indicator. Data, settings, and web service messages Your device can receive many kinds of messages that contain data, such as business cards, ringing tones, operator logos, calendar entries, and e-mail notifications. You may also receive settings from your service provider or company information management department in a configuration message.
If you select New mailbox in the Messaging main view and have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start. When you create a new mailbox, the name you give to the mailbox replaces New mailbox in the Messaging main view. You can have up to six mailboxes. Open the mailbox Press , and select Messaging and a mailbox. When you open the mailbox, the device asks if you want to connect to the mailbox (Connect to mailbox?).
Messaging To retrieve e-mail messages automatically, select Options > E-mail settings > Automatic retrieval. See "Automatic retrieval settings", p. 134. Setting the device to retrieve e-mail automatically may involve the transmission of large amounts of data through your service provider's network. Contact your service provider for information about data transmission charges. Delete e-mail messages Press , and select Messaging and a mailbox.
Text message settings Press , and select Messaging > Options > Settings > Text message. Select from the following: ● Message centres — View a list of all text message centres that have been defined. ● Message centre in use — Select which message centre to use to deliver text messages. ● Character encoding — To use character conversion to another encoding system when available, select Reduced support. ● Receive report — Select whether the network sends delivery reports on your messages (network service).
Messaging Outside your home cellular network, sending and receiving multimedia messages may cost you more. If you select Multimedia retrieval > Always automatic, your device automatically makes an active packet data connection to retrieve the message both in and outside your home cellular network. ● Allow anonymous msgs. — Select whether you want to reject messages from an anonymous sender. ● Receive adverts — Define whether you want to receive multimedia message advertisements.
To edit the settings for the e-mail you send, select Outgoing e-mail and from the following: ● My e-mail address — Enter the e-mail address given to you by your service provider. ● Outgoing mail server — Enter the IP address or host name of the mail server that sends your email. You may only be able to use the outgoing server of your service provider. Contact your service provider for more information.
Messaging ● E-mail retrieval — Define which parts of the email are retrieved: Headers only, Size limit (POP3), or Msgs. & attachs. (POP3). ● Retrieval amount — Define how many new email messages are retrieved to the mailbox. ● IMAP4 folder path (for IMAP4 only) — Define the folder path for folders to be subscribed. ● Folder subscriptions (for IMAP4 only) — Subscribe to other folders in the remote mailbox, and retrieve content from those folders.
Other settings Press , and select Messaging > Options > Settings > Other. Messaging and saves the new numbers without a name to the topic list. Select from the following: ● Save sent messages — Select whether you want to save a copy of the text messages, multimedia messages, or e-mail that you send to the Sent folder. ● Number of saved msgs. — Define how many sent messages are saved to the sent folder at a time. When the limit is reached, the oldest message is deleted.
Make calls Make calls Voice calls 1. In the standby mode, enter the phone number, including the area code. To remove a number, press C. For international calls, press * twice for the + character (which replaces the international access code), and enter the country code, area code (omit the leading zero if necessary), and phone number. 2. To make the call, press the call key. 3. To end the call (or to cancel the call attempt), press the end key.
During an active call, to route the sound from the handset to the loudspeaker, select Options > Activate loudspeaker. If you have attached a compatible headset with Bluetooth connectivity, to route the sound to the headset, select Options > Activate handsfree. To switch back to the handset, select Options > Activate handset. To end an active call and replace it by answering the waiting call, select Options > Replace. If you have several calls active, to end them all, select Options > End all calls.
Make calls 3. When the new call is answered, to join the first participant in the conference call, select Options > Conference. To add a new person to the call, repeat step 2, and select Options > Conference > Add to conference. Your device supports conference calls between a maximum of six participants, including yourself. To have a private conversation with one of the participants, select Options > Conference > Private. Select a participant, and select Private.
The voice tag for a contact is the name or nickname that is saved on the contact card. To listen to the synthesised voice tag, open a contact card, and select Options > Play voice tag. Make a call with a voice tag Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialling in all circumstances. When you use voice dialling, the loudspeaker is in use. Hold the device at a short distance away when you say the voice tag. 1.
Make calls You are not receiving video (the recipient is not sending video or the network is not transmitting it). Options during a video call Even if you denied video sending during a video call, the call is still charged as a video call. Check the pricing with your service provider. To use the main camera to send video, select Options > Use main camera. To switch back to the secondary camera, select Options > Use secondary camera. You have denied video sending from your device.
When a video call arrives, is displayed. To answer the video call, press the call key. Allow video image to be sent to caller? is displayed. To start sending live video image, select Yes. If you do not activate the video call, video sending is not activated, and you only hear the sound of the caller. A grey screen replaces the video image. To replace the grey screen with a still image captured by the camera in your device, select Tools > Settings > Phone > Call > Image in video call.
Make calls Settings To set up your UMTS connection, do the following: Person-to-person connection settings ● Ensure that your device UMTS access point connection settings are configured properly. To set up video sharing, you need person-to-person and UMTS connection settings. A person-to-person connection is also known as a Session Initiation Protocol (SIP) connection. The SIP profile settings must be configured in your device before you can use video sharing.
Options during video sharing to zoom the video (available for sender only) to adjust the brightness (available for sender only) or or to mute or unmute the microphone to switch the loudspeaker on and off to switch to full screen mode (available for receiver only) 3. To end the sharing session, select Stop. To end the voice call, press the end key. When you end the call, video sharing also ends. To save the live video you shared, select Save when prompted. The shared video is saved in Photos.
Make calls To monitor the phone numbers of missed, received, and dialled voice calls, select Recent calls. The device registers missed and received calls only if the network supports these functions, the device is switched on, and within the network service area. To clear all recent call lists, select Options > Clear recent calls in the recent calls main view. To clear one of the call registers, open the register you want to erase, and select Options > Clear list.
To set the log duration, select Options > Settings > Log duration. If you select No log, all the log contents, recent calls register, and messaging delivery reports are permanently deleted. Make calls To erase the contents of the log, recent calls register, and messaging delivery reports permanently, select Options > Clear log. Select Yes to confirm. To remove a single event from one of the recent calls logs, press C.
Contacts (phonebook) Contacts (phonebook) In Contacts, you can save and update contact information, such as phone numbers, home addresses, or e-mail addresses of your contacts. You can add a personal ringing tone or a thumbnail image to a contact card. You can also create contact groups, which allow you to send text messages or e-mail to many recipients at the same time.
1. In the contacts list, select a contact. 2. Select Options > Defaults. 3. Select a default to which you want to add a number or an address, and select Assign. 4. Select a number or an address you want to set as a default. The default number or address is underlined in the contact card. Add ringing tones for contacts Press , and select Contacts. To define a ringing tone for a contact or a contact group, do the following: 1.
Contacts (phonebook) SIM contacts To add the names and numbers stored on the SIM card to the contacts list in Contacts, select Options > Settings > Contacts to display > SIM memory. You can add and edit SIM contacts, or call them. The numbers you save in Contacts are not automatically saved to your SIM card. To save numbers to the SIM card, in Contacts, select a contact and Options > Copy > SIM memory.
Contacts (phonebook) 3. To remove the contact from the group, select Yes.
Office folder Office folder Quickoffice With the Quickoffice applications, you can view .doc, .xls, .ppt, .pps, and .txt documents and download software. Not all file formats or features are supported. Apple Macintosh is not supported. To view a file, press , and select Applications > Office > Quickoffice. Select the location from which you want to view files, browse to the desired folder, and select a file. The files open in the respective applications depending on the file format.
With Quickpoint, you can view native Microsoft PowerPoint presentations with your device. Quickpoint supports the viewing of presentations saved in .ppt and .pps formats created with Microsoft PowerPoint 2000, XP, and 2003. Not all variations or features of the mentioned file formats are supported. To upgrade to a version of Quickpoint that supports editing, when you have a file open, select Options > Updates and upgrades. The upgrade is chargeable.
Office folder The converter has limited accuracy, and rounding errors may occur. 1. In the Type field, select the measure you want to use. 2. In first Unit field, select the unit from which you want to convert. 3. In the next Unit field, select the unit to which you want to convert. 4. In the first Amount field, enter the value you want to convert. The other Amount field changes automatically to show the converted value. Convert currency Select Type > Currency.
Calculator You can recall the last saved result the next time you open the Calculator application. This calculator has limited accuracy and is designed for simple calculations. Application manager The calculator performs operations in the order they are entered. The result of the calculation remains in the editor field and can be used as the first number of a new calculation. You can install two types of applications and software to your device: Press , and select Applications > Calculator.
Applications folder Install applications and software You can transfer installation files to your device from a compatible computer, download them during browsing, or receive them in a multimedia message, as an e-mail attachment, or using other connectivity methods, such as Bluetooth connectivity. You can use Nokia Application Installer in Nokia PC Suite to install an application to your device. Icons in Application manager indicate the following: .sis or .
During installation, the device shows information about the progress of the installation. If you install an application without a digital signature or certification, the device displays a warning. Continue installation only if you are sure of the origin and contents of the application. To start an installed application, locate it in the menu, and select it. If the application does not have a default folder defined, it is installed in the Applications folder in the main menu.
Applications folder 156 ● Online certificate check — Select to check the online certificates before installing an application. ● Default web address — Set the default address used when checking online certificates. Some Java applications may require that a message be sent or a network connection be made to a specific access point to download extra data or components.
File manager Edit memory card About File manager To rename or format a memory card, select Options > Memory card options. Press , and select Tools > File mgr.. With File manager, you can browse and manage, and open files on your device, mass memory, memory card, or a compatible external drive. To map or delete drives, or to define settings for a compatible remote drive connected to your device, select Options > Remote drives. The available options depend on the memory you select.
Tools folder technologies (DRM) may prevent some backup data from being restored. Contact your service provider for more information about DRM used for your content. To format mass memory, select Options > Format mass memory. Do not format the mass memory using PC software because it may cause degraded performance. Formatting does not guarantee that all confidential data stored in the device mass memory is permanently destroyed.
Press , and select Tools > Sync. Sync enables you to synchronise your notes, calendar entries, text and multimedia messages, browser bookmarks, or contacts with various compatible applications on a compatible computer or on the internet. You may receive synchronisation settings in a special message from your service provider. Use Device manager to connect to a server and receive configuration settings for your device, to create new server profiles, or to view and manage existing server profiles.
Tools folder Tip: When you download a new language, you must download at least one voice for that language. To set the speaking voice, select Voice. The voice depends on the selected language. To set the speaking rate, select Speed. To set the speaking volume, select Volume. To view details of a voice, scroll right to the voice tab, scroll to the voice, and select Options > Voice details. To listen to a voice, scroll to the voice, and select Options > Play voice.
Some settings may be preset for the device by your service provider, and you may not be able to change them. General settings In general settings, you can edit the general settings of your device or restore the device to original default settings. You can adjust time and date settings also in the clock. See "Clock ", p. 120. Personalisation settings Press , and select Tools > Settings > General > Personalisation.
Settings ● Light time-out — Select a time-out after which the backlight of the display is switched off. Standby mode ● Shortcuts — Assign shortcuts to the selection keys to be used in the standby mode and select which applications are shown in the active toolbar. If the active standby is set off, you can assign keypad shortcuts for the different presses of the scroll key.
TV-out settings To change the settings for a TV-out connection, select TV-Out and from the following: ● Default profile — Set the profile that you want activated each time you connect a Nokia Video Connectivity Cable to your device. ● TV screen size — Select the aspect ratio of the TV: Normal or Widescreen for widescreen TVs. ● TV system — Select the analogue video signal system that is compatible with your TV. ● Flicker filter — To improve image quality on the screen of your TV, select On.
Settings SIM card is inserted into your device. The device maintains a list of SIM cards that are recognised as the owner’s cards. ● Closed user group — You can specify a group of people to whom you can call and who can call you (network service). When calls are limited to closed user groups, calls may be possible to the official emergency number programmed into your device.
Change the trust settings Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner. Scroll to an authority certificate, and select Options > Trust settings. Depending on the certificate, a list of the applications that can use the selected certificate is shown.
Settings Positioning settings Press , and select Tools > Settings > General > Positioning. Positioning methods ● Integrated GPS — Use the integrated GPS receiver of your device. ● Assisted GPS — Use Assisted GPS (A-GPS) to receive assistance data from an assistance data server. See "Assisted GPS (A-GPS)", p. 90. ● Bluetooth GPS — Use a compatible external GPS receiver with Bluetooth connectivity. ● Network based — Use information from the cellular network (network service).
● ● ● ● ● Call divert Press , and select Tools > Settings > Phone > Call divert. Call divert allows you to divert incoming calls to your voice mailbox or another phone number. For details, contact your service provider. Settings ● call after an unsuccessful call attempt. To stop automatic redialling, press the end key. Show call duration — Activate this setting if you want the length of a call to be displayed during the call.
Settings Voice call barring Select the desired barring option, and set it on (Activate) or off (Deactivate), or check whether the option is active (Check status). Call barring affects all calls, including data calls. Network settings Press , and select Tools > Settings > Phone > Network. Your device can automatically switch between the GSM and UMTS networks. The GSM network is indicated with in the standby mode. The UMTS . network is indicated with 168 ● Network mode — Select which network to use.
You can also use a WLAN data connection. Only one connection in one wireless LAN can be active at a time, but several applications can use the same internet access point. To establish a data connection, an access point is required.
Settings fields can be left empty, unless your service provider has instructed otherwise. To use a data connection, your service provider must support this feature, and if necessary, activate it for your SIM card. Packet data access points Press , and select Tools > Settings > Connection > Destinations > New access point, and follow the instructions on the screen. Or, open one of the access point groups, select an access point marked with , and select Edit.
Follow the instructions from your WLAN service provider. ● WLAN network name — Select Enter manually or Search for networks. If you select an existing network, WLAN network mode and WLAN security mode are determined by the settings of its access point device. ● Network status — Define whether the network name is displayed. ● WLAN network mode — Select Ad-hoc to create an ad hoc network and to allow devices to send and receive data directly; a WLAN access point device is not needed.
Settings ● ● ● ● gateway, and the IP addresses of the primary and secondary DNS servers. Contact your internet service provider for these addresses. IPv6 settings — Define the type of DNS address. Ad-hoc channel (only for Ad-hoc) — To enter a channel number (1-11) manually, select User defined. Proxy server address — Enter the address for the proxy server. Proxy port number — Enter the proxy port number. Packet data settings Press , and select Tools > Settings > Connection > Packet data.
Configurations Press , and select Tools > Settings > Connection > Configurations. You may receive trusted server settings from your service provider in a configuration message. You can save view or delete these settings in configurations. Application settings To edit the settings of some of the applications in your device, press , and select Tools > Settings > Applications. Settings your service provider. You can view, delete, or create these setting profiles in SIP settings.
Troubleshooting Troubleshooting To view frequently asked questions about your device, visit the product support pages at www.nseries.com/support . Q: What is my password for the lock, PIN, or PUK codes? A: The default lock code is 12345. If you forget the lock code, contact your device dealer. If you forget a PIN or PUK code, or if you have not received such a code, contact your network service provider.
Q: Why can’t the other device see the files stored on my device in the home network? A: Make sure that you have configured the home network settings, content sharing is turned on in your device, and the other device is UPnP compatible. Q: What can I do if my home network connection stops working? A: Switch off the wireless LAN (WLAN) connection from your compatible PC and your device, and switch it on again. If this does not help, restart your compatible PC and your device.
Troubleshooting 2. To increase the background scan time interval, adjust the time in Scan for networks. To stop background scans, select Show WLAN availability > Never. 3. To save your changes, press Back. When Show WLAN availability is set to Never, the WLAN availability icon is not shown in the standby mode. However, you can still manually scan for available WLAN networks, and connect to WLAN networks as usual.
A: Ensure that you have the latest version of Nokia Nseries PC Suite and that it is installed and running on your compatible PC. For further information on how to use Nokia Nseries PC Suite, see the Nokia Nseries PC Suite help or visit the Nokia support pages. Q: Can I use my device as a fax modem with a compatible PC? Troubleshooting Q: Why do I have problems connecting the device to my PC? A: You cannot use your device as a fax modem.
Enhancements Enhancements Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous. For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.
Battery and charger information Your device is powered by a rechargeable battery. The battery intended for use with this device is BL-5F. This device is intended for use when supplied with power from the following chargers: AC-5. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery.
Battery circuiting the terminals may damage the battery or the connecting object. Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste. Do not dismantle, cut, open, crush, bend, deform, puncture, or shred cells or batteries. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes.
Battery 2. When you angle the hologram left, right, down and up, you should see 1, 2, 3 and 4 dots on each side respectively. What if your battery is not authentic? If you cannot confirm that your Nokia battery with the hologram on the label is an authentic Nokia battery, please do not use the battery. Take it to the nearest authorised Nokia service point or dealer for assistance.
Care and maintenance Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. ● Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics. ● Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.
These suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorised service facility for service. Disposal The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life.
Additional safety information Additional safety information Small children Your device and its enhancements may contain small parts. Keep them out of the reach of small children. Operating environment This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 1.5 centimetres (5/8 inch) away from the body.
● Not carry the wireless device in a breast pocket. ● Hold the wireless device to the ear opposite the medical device to minimise the potential for interference. ● Turn the wireless device off immediately if there is any reason to suspect that interference is taking place. ● Read and follow the directions from the manufacturer of their implanted medical device. If you have any questions about using your wireless device with an implanted medical device, consult your health care provider.
Additional safety information 186 Potentially explosive environments Switch off your device when in any area with a potentially explosive atmosphere, and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refuelling points such as near gas pumps at service stations.
4. Press the call key. When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so. CERTIFICATION INFORMATION (SAR) This mobile device meets guidelines for exposure to radio waves. Your mobile device is a radio transmitter and receiver.
Index Index A access codes 21 access points 113, 169 accessories See enhancements active standby mode 41, 162 active toolbar 67 in camera 65 in Photos 76 address book See contacts alarm clock 120 alarm, calendar note 121 albums, media 77 anniversary notes 121 answering calls 137 application manager 153 applications 153 assisted GPS (A-GPS) 90 attachments 127, 129 audio messages 125 auto-update for time/ date 120 188 B backing up device memory 157 backlight time-out 162 battery power saver setting 161 s
voice tags 146 converter 151 copying text to clipboard 125 copyright protection 103 currency converter 151 customer service 20 D data connections cable 118 device manager 159 PC connectivity 119 synchronisation 159 date and time 120 declining calls 137 device manager 159 dialled numbers 143 dismissing calls 137 display settings 161 DLNA 84 document applications 150 downloads 108 DRM (digital rights management) 103 duration of calls 144 E e-mail messages 128 end all calls option 138 enhancements setting
Index sharing content 86 home synchronisation incoming files 88 setting up 87 settings 88 HSDPA (high-speed downlink packet access) 37 I IAPs (internet access points) 113 images editing 78 printing 79, 80 sharing online 80 inbox, message 127 indicators and icons 27 installation of applications 154 internet connection 105 See also browser internet radio favourites 62 listening 61 settings 63 station directory 62 J 190 J2ME Java application support 153 Java scripts/ applications 153 K keyguard 29, 163
N N-Gage 31 settings 35 N-Gage views 31 navigation tools 90 network settings 168 news feeds 107 Nokia contact information 20 notes 151 O offline mode 37 operator logo 162 options menu for calls 136 outbox, message 123 P packet data connection access point settings 170 counters 144 settings 172 page overview 107 PDF reader 151 personal certificates 164 personalisation 39, 161 phonebook See contacts photographs See camera Photos active toolbar 71 organising files 76 photos editing 78 file details 76 red
Index redial feature 167 rejecting calls 137 remote mailbox 128 remote SIM mode 118 ringing tones 39, 40 roaming 168 S 192 scenes, image and video 68 screen settings 161 security certificates 164 web browser 110 WEP 171 WPA 171 security code 21 security module 165 self-timer, camera 69 sent messages folder 123 service commands 123 service messages 128 setting wizard 25 settings access point name control 173 access points 169 applications 173 Bluetooth connectivity 115 breathing 165 call barring 167 cal
U unlocking keypad 29, 163 UPIN code 21 UPnP (Universal Plug and Play architecture) 84 UPUK code 21 USB cable connection 118 useful information 20 V video calls 139, 141 options during 140 Video Centre 42 Video centre downloading 42 viewing 42 video clips shared 141 video settings 73 Visual Radio 59 voice applications 158 voice calls See calls voice commands 138, 158 voice recorder 104 volume controls 36 world clock WPA 171 Z 120 Index sending 125 settings 131 SIM messages 130 themes 39 time and dat
