Product Card
Table Of Contents
- Get Started
- Nokia 1 Plus
- 1. Insert the SIM and memory card
- 1. With the phone facing down, put your fingernail in the seam between the back cover and the display, bend the back cover open, and remove it.
- 2. Slide the SIM card holder to the right and open it up. Put a nano-SIM card in the SIM slot with the contact area face down. Slide the holder to the left to lock it in place.
- 3. If you have a dual-SIM phone, slide the SIM card holder of the SIM2 slot to the left and open it up. Put your second nano-SIM card in the slot with the contact area face down. Close down the holder and slide it to the right to lock it in place.
- 4. If you have a microSD memory card, slide the card in the memory card slot.
- 5. Press the top edge of the back cover against the top edge of your phone, and then snap the cover into place, locking all the hooks around the edges of the cover.
- 2. Charge the battery and switch the phone on
- 1. Insert the SIM and memory card
- Product and safety info
1. Insert the SIM and memory
card
1. With the phone facing down, put your fingernail
in the seam between the back cover and the
display, bend the back cover open, and remove it.
2. Slide the SIM card holder to the right and open it
up. Put a nano-SIM card in the SIM slot with the
contact area face down. Slide the holder to the left
to lock it in place.
3. If you have a dual-SIM phone, slide the SIM card
holder of the SIM2 slot to the left and open it up.
Put your second nano-SIM card in the slot with the
contact area face down. Close down the holder and
slide it to the right to lock it in place.
4. If you have a microSD memory card, slide the
card in the memory card slot.
5. Press the top edge of the back cover against the
top edge of your phone, and then snap the cover
into place, locking all the hooks around the edges of
the cover.
Note: Switch the device off and disconnect the
charger and any other device before removing any
covers. Avoid touching electronic components while
changing any covers. Always store and use the
device with any covers attached.
Both SIM cards are available at the same time when
the device is not being used, but while one SIM card
is active, for example, making a call, the other may
be unavailable.
Note: On dual SIM capable devices, both SIM1
and SIM2 slots support 4G networks. However, if
your SIM1 and SIM2 are both LTE SIM cards, the pri-
mary SIM supports 4G/3G/2G networks, while the
secondary SIM can only support 3G/2G. For more
information on your SIM cards, contact your service
provider.
2. Charge the battery and switch
th
e phone on
Plug a compatible charger into a wall outlet, and
connect the cable to your phone. Your phone sup-
ports the USB micro-B cable. You can also charge
your phone from a computer with a USB cable, but
it may take a longer time.
If the battery is completely discharged, it may take
several minutes before the charging indicator is dis-
played.
Get Started
Nokia x
TA-1123/TA-1127 EN-LATAM
Flash
Camera
Headset connector
Loudspeaker
USB connector
Front camera
Earpiece
Proximity
sensor
Volume keys
Power/Lock key