Electronic user's guide released subject to "Nokia User's Guides Terms and Conditions, 7th June, 1998" User’s Guide for the Wireless Headset (HDW-2) 9355260 Issue 1
DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product HDW-2 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/. Copyright © 2002-2003 Nokia. All rights reserved.
Contents Contents 1. Introduction .......................................................................................................5 Bluetooth wireless technology ................................................................................................................ 5 Chargers and batteries............................................................................................................................... 6 The card in the sales package .............................................
Disconnecting the headset from the phone ......................................................................................18 Reconnecting the paired headset to your phone..........................................................................18 Using the headset with several phones ..............................................................................................19 Using the headset with several paired phones..............................................................................
Introduction 1. Introduction The Wireless Headset HDW-2 can be connected without wires to a compatible phone that supports Bluetooth wireless technology. This gives you complete freedom for making and receiving calls while on the move or at the office. Read this user’s guide carefully before using the headset. More detailed information is provided by your phone's own user's guide.
The headset provides the best performance when it is used with a compatible Nokia phone. If you use the headset with a phone produced by another manufacturer, all the functions described in this user’s guide may not be available. In some countries, there may be restrictions on using Bluetooth devices. Check with your local authorities. ■ Chargers and batteries Check the model number of any charger before using it with this device.
Getting started 2. Getting started ■ Overview The headset contains the following parts: 1 - Power key: Switches the headset on and off. 2 - Answer/end key: Answers or ends the call. This key can also be used for voice dialling, redialling and switching an active call between the headset and the phone. 3 - Indicator light: Displays the current status of the headset. 4 - Volume up: Increases the earphone volume during a call. 5 - Volume down: Decreases the earphone volume during a call.
■ Charging the battery The headset has a rechargeable NiMH battery. If you need to replace the battery, you can purchase a new one from your nearest authorised dealer. To charge the battery: 1. Connect the charger cable to the headset. For a list of compatible chargers, see Chargers and batteries on page 6. 2. Connect the charger to an AC wall outlet. The red indicator light is displayed during charging. Charging the battery fully takes between 1 and 2 hours, depending on the charger. 3.
Getting started When the battery charge falls low The fully charged battery has power for up to 3 hours of talk time and up to 60 hours of standby time. (In standby mode, the headset is switched on but no call is in progress.) When the battery is running out of power, the headset beeps. Charge the battery as described above. ■ Changing the battery When the operating time is noticeably shorter than normal, it is time to buy a new battery. To change the battery: 1.
2. Remove the battery by pulling the strap (2). 3. Detach the battery from the connector (3). 4. Attach the new battery to the connector. 5. Place the connector in the space reserved for it and set the battery into its place (4). Copyright © 2003 Nokia. All rights reserved.
Getting started 6. Close the battery door and make sure it is properly locked in place (5). ■ Switching the headset on or off To switch on: Press and hold the power key for 2 seconds. The headset beeps and the green indicator light starts blinking. The blinking continues until the headset is connected to your phone, within 5 minutes. If the headset cannot be connected to your phone during this time, the headset is switched off. To switch off: Press and hold the power key for 2 seconds.
The phone searches for all Bluetooth devices within about 10 meters and displays them as a list. 5. Select the headset from the list. 6. Enter the passkey to associate ("pair") and connect the headset to your phone. The passkey is marked on the card that is provided in the sales package of the headset. Once you have entered the passkey, your phone becomes the default phone for the headset, if the headset has not been previously paired with another phone.
Getting started To change the orientation of the earpiece, detach the earloop from the body part as shown in the figure below, and place it back according to the L/R markings on the earloop. L stands for the left ear, and R stands for the right ear. When, for example, the R marking is visible, you can wear the headset on your right ear. Copyright © 2003 Nokia. All rights reserved.
■ Placing the headset on the ear Slide the earloop gently behind your ear as shown in the figure below: ■ Troubleshooting If you cannot connect the headset to your phone, proceed as follows: • Make sure that the headset is switched on and paired with your phone. • Make sure that the Bluetooth feature is activated on your phone.
Using the headset 3. Using the headset Before using the headset, make sure that: • The headset is paired and connected to your phone. For instructions on pairing the headset, see Taking the headset into use for the first time on page 11. For instructions on connecting the headset, see Connecting the paired headset to your phone below.
permission. In Nokia phones this can be done by changing your paired devices settings in the Bluetooth menu. For more information on disconnecting the headset from your phone, see page 18. ■ Making a call When the headset is connected to your phone, make the call by using your phone in the normal way. ■ Voice dialling When no call is in progress, press and hold the answer/end key until you hear a tone that indicates that you can say the desired name ("voice tag"). Say the voice tag.
Using the headset When you receive a call, you hear a ringing tone selected on your phone also through the headset. ■ Ending a call Press the answer/end key to end the currently active call. You can also end the call by using your phone in the normal way. ■ Rejecting a call If you do not want to answer a call, briefly press the answer/end key twice. ■ Automatic answer If the Automatic answer function is set on in your phone, the phone automatically answers the incoming call after one ring.
• Press and hold the answer/end key. OR: • Use the respective function in your phone. To switch the call from phone to headset: • Press and hold the answer/end key. OR: • Use the respective function in your phone. ■ Disconnecting the headset from the phone You can disconnect the headset from your phone when, for example, you want to use another Bluetooth device with your phone. The headset can be disconnected in the following ways: • Switch off the headset.
Using the headset ■ Using the headset with several phones Before the headset can be used with your phone, the phone has to be paired with the headset. The headset can be paired with up to 8 phones but connected to only one phone at a time. Using the headset with several paired phones The phone that was first paired with the headset is called the "default phone". The phone that was last used with the headset is called the "last used phone".
■ Resetting the headset You can reset the headset to the original settings to, for example, change the default user of the headset. When you reset the headset, all of its settings, including pairing information, are cleared. To reset the headset: Press and hold the power key together with the volume up key for 10 seconds. After the headset has been reset, the headset beeps twice and the red and green indicator lights alternate for several seconds. Copyright © 2003 Nokia. All rights reserved.
Battery information 4. Battery information Your headset is powered by a rechargeable battery. Take good care of the battery and follow the guidelines below. Charging and discharging • Note that a new battery's full performance is achieved only after two or three complete charge and discharge cycles! • The battery can be charged and discharged hundreds of times but it will eventually wear out. When the operating time is noticeably shorter than normal, it is time to buy a new battery.
battery between 15°C and 25°C (59°F and 77°F). A headset with a hot or cold battery may temporarily not work, even when the battery is fully charged. Batteries' performance is particularly limited in temperatures well below freezing. • Do not dispose of a battery in a fire! Dispose of batteries according to local regulations (e.g. recycling). Do not dispose as household waste. Copyright © 2003 Nokia. All rights reserved.
Care and maintenance Care and maintenance Your headset is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you to fulfil any warranty obligations and to enjoy this product for many years. • Keep all accessories out of the reach of small children. • Keep the headset dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. • Do not use or store the headset in dusty, dirty areas.
