Cell Phone User Manual
56 Copyright © 2009 Nokia. All rights reserved.
Camera
To activate the secondary camera, select Options > Use
secondary camera.
2 Press the camera key to start recording. With the
secondary camera, press the scroll key for recording.
is shown and a tone sounds, indicating that
recording has started.
To zoom in or out of the subject using the main camera,
press the volume keys, or, using the secondary camera,
scroll down or up.
3 To stop recording, select Stop. The video clip is
automatically saved to the Video clips folder in the
Gallery. See "Gallery", p. 49. The maximum length of
the video clip depends on the available memory.
To pause recording at any time, select Pause. Video
recording automatically stops if recording is set to pause
and there are no keypresses within a minute. Select
Continue to resume recording.
To make lighting and colour adjustments before recording
a video, select from the active toolbar settings. See "Active
toolbar", p. 54 and "Scenes", p. 55.
After recording a video
After you record a video clip, select the following from the
active toolbar (available only if Show captured video is set
to On. See "Video settings", p. 57):
• To immediately play the video clip you just recorded,
select Play .
• To send the video clip using a multimedia message,
e-mail, or Bluetooth connectivity, press the call key, or
select Send ( ). You may not be able to send video
clips saved in the .mp4 file format in a multimedia
message.
• To upload the video clip to a compatible online album,
select Sign in for Share online ().
• To open the Gallery, select Go to Gallery ().
• If you do not want to keep the video, select Delete
().
Camera settings
There are two kinds of settings for the still image camera:
active toolbar settings and main settings. To use active
toolbar settings, see "Active toolbar", p. 54. The active
toolbar settings return to the default settings after you
close the camera, but the main settings remain the same
until you change them again.
Still image camera settings
To change the main settings, select Options > Settings.
To set the image resolution (only available in the main
camera), select Image quality. The better the image
quality, the more memory the image consumes. To print
N5630_UG_2_en_hk.fm Page 56 Monday, March 2, 2009 12:26 PM