User Manual

FCC ID：TNZNHSQ4C2MXXX
GETTING STARTED
Remove all components from the package. Items in the pack
include: Bluetooth headset with Ear Cap, User Guide and AC
Charger. Please check the contents carefully and contact your
local dealer immediately if there are any shortages.
GETTING TO KNOW YOUR HEADSET
See image above. Please note some models of headset will differ
slightly in style, color and the functionality may vary according to
their specifications.
BUTTON FUNCTION & PAIRING CODE
Function
Power Switch
Pairing
Call Answering
Call Ending
Call Rejecting
MFB
Last Number Redial
Volume Tuning (Press repeatedly)
Mute
V+ & V-
Call Interchanging
Pairing Code
0000
CHARGING YOUR HEADSET
The Bluetooth headset comes with a built-in rechargeable battery.
Prior to using the headset, it is recommendable to charge the
battery fully for the first time. When fully charged, the battery
provides up to 3 hours of talk time and up to 60 hours of
standby time. Please follow these simple steps:
(a) Charge your headset. Prior to using the headset, it is
recommendable to charge the battery fully.
(b) Connect the charger to an AC wall outlet and the charge plug
to the headset’s charging socket. When the charge is
completed, remove the charger from the headset and the wall
outlet.
(c) Your headset and Bluetooth-enabled mobile phone should be
no more than 1 meter apart for pairing.
(d) Your headset and mobile phone should be within 10 meters
(max.) during operation - Bluetooth sensing distance.
IMPORTANT:
(a) Charge time: Normal full charge time is 2 hrs. (Approx.).
(b) Charge indication: When the charge is in process, the LED
flashes amber. When the charge is completed, the LED will
be off.
(c) Low voltage indication: You may hear 2 beeps from headset
every 30 seconds with LED flashing amber. It is
recommended to charge the headset immediately to prolong
life of battery and standby time. Under low voltage, if the
battery is not charged within a certain time – 30 seconds
(approx.), the headset will be powered off.
(d) Charging indication will be delayed for a few minutes if the
headset has not been used for a long time or the battery is
drained.
SWITCHING ON YOUR HEADSET
Turning On - Headset in off mode:
(a) Press and hold the MFB on your headset for 3 seconds until you
hear a short beep. The LED will flash blue for 1 second.
(b) Headset will be in standby mode. The LED will flash blue.
Turning Off – The headset in any modes:
(a) Press and hold the MFB for 5 seconds until you hear a long beep.
The LED will flash amber for 1 second.
(b) Headset will be off.
IMPORTANT: Press the MFB each time you turn on the headset
to re-activate the pairing so that the connection between the
headset and the paired mobile handset is resumed. Please refer to
the procedures for “Pairing”.
PAIRING THE HEADSET WITH YOUR MOBILE PHONE
Pairing is the process of linking the headset with your Bluetooth
mobile phone. Before you use the headset with your mobile phone
you must pair the devices.
Please refer to your phone’s user manual for further information on
‘How to Pair’. Typically, you need to make your phone ‘Discover’
the headset by using a “Bluetooth”, “Connect” or “Setup” menu
then selecting an option to “Discover” your headset.
To pair your headset and mobile phone
(a) Place the Bluetooth headset and mobile phone at a distance
of up to 1 meter from one another.
(b) Make sure the headset is in off mode.
(c) Press and hold the MFB for 5 seconds until the headset LED
flashes amber and blue alternately. It is now ready for pairing.
(d) Activate your mobile handset’s Bluetooth accessing function
by referring to your mobile handset user guide for details.
Meanwhile, the handset will search for accessible Bluetooth
Declaration of Conformity.
We declare that product NHSQ4C2MXXX conforms to the
R
&
TTE Dir
ec
ti
ve
1
999/5/
E
C
.
BLUETOOTH
SUPER MINI HEADSET
P/N NHSQ4C2MXXX
USER MANUAL