User's Manual

7
Copyright Nolan Systems Inc. 2005
[e-mail]
http://www.nolan-sys.com/
This material may not in whole or part be copied, or communicated to third parties without Nolan Systems prior agreement in
writing.
Nolan Systems – USA
1595 Cleo Springs Dr.
San Jose, Ca. 95131, USA
Tel: [phone] Fax: [phone]
States Indication
Battery is full Amber LED is off
Battery is low Amber LED works
Headset is off Both LEDs are off
Headset is in standby mode, ready to
make/receive calls
Blue LED flash at three-second interval
Headset is in pairing mode Blue and Amber LED flash alternatively
LEDs also indicate certain operations
Operation Indication
Turn on the headset LEDs quick flash 5 times
Turn off the headset LEDs quick flash 5 times
Headset enter pairing mode LEDs quick flash 5 times
Pairing finished LEDs quick flash 5 times
Audio indication
Tones heared through the headset provide an audible indication of a requested action.
Beep Tone Description of the Tone indicates
ON Two ascending beeps Turn on the headset
OFF Two descending beeps Turn off the headset
PAIR Three ascending beeps Enter pairing mode
LND Single long beep Generate the Last number
redial function
RING Melodious beeps Incoming call in ongoing
MUTE Single long beeps Mute/un-mute the microphone
VD Two short beeps Voice dial enabled
CT Single piping Call transfer enabled