User's Manual

7. MUSIC VIA BLUETOOTH – A2DP BLUETOOTH PROTOCOLL

Play music (Play) Briefly press “on”.

Pause function (Pause)

When the player is connected and playing music, press “on” for 2

seconds.

Next track (Skip) When the player is playing music, press “” for 2 about seconds.

Previous track (Rew) When the player is playing music, press “” for 2 about seconds.

Turning off the A2DP Press “on” and keep it pressed for about 4 seconds.

Turning on the A2DP

The A2DP is already active when the system is turned on;

otherwise, press the “on” key briefly.

You can also configure these settings through Smartphone Android, iPhone and iPad thanks

to the dedicated N-Com App.

8. MUSIC VIA CABLE

Connect the mini USB connector of the Multimedia Wire (not included) to the helmet and the other end

to the audio device. A coloured band on the cable indicates the connector to be hooked up to the audio

device.

Turning on the cable

audio

Press the “on” key three times.

Turning off the cable

audio

Press “on” and keep it pressed for about 2 seconds.

9. SATELLITE NAVIGATOR FOR MOTORCYCLES

M5 system is compatible with the most common satellite navigators for motorcycles. For a list of

compatible models and additional details, visit the website www.n-com.it

To pair up a satellite navigator to the M5 system, follow the same procedure illustrated in Chapter 4.2.

GPS Conference Call Function

The Conference function allows you to keep the “Rider-Pillion Passenger” intercom open even while the

satellite navigator is giving instructions, thus preventing the intercom mode to be turned off every time

the navigator gives instructions. However, if you wish to activate the Conference GPS function, simply

turn on the intercom manually during the GPS directions.

Turning on the GPS Conference

function

During the GPS directions, briefly press “n”.

Turning off the GPS Conference

function

During the GPS directions, briefly press “n”.

At the end of the GPS communication, the intercom with the second helmet stays open and the

"Conference" setting is stored for future GPS communications.

N.B.: The GPS Conference function can only be used with the Rider-Pillion Passenger intercom (channel

1) and not with the Bike-to-Bike communication (channels 2-6).