User's Manual

BX5

9.1. Navigators on Smartphone (Smart Navi System)

By connecting the M5 system to a Smartphone, all navigator instructions are sent to the helmet through

the A2DP profile. During each navigator communication, the intercom via Bluetooth is automatically cut

off and subsequently restored when the navigator has stopped giving road instructions (SMART NAVI

SYSTEM function).

The Smart Navi System function can be turned off in Setting Mode (see Chapter 15).

10. FM RADIO

Turning on the radio Press the “on” key twice

Turning off the radio Press the “on” key twice.

New station automatic search Press “” and keep it pressed for 2 seconds.

Pre-setting a radio station (max. 6

stations)

Press “” and keep it pressed for 4 seconds.

Changing radio stations (among

the pre-set ones)

Press “” and keep it pressed for 2 seconds.

This function can also be turned on through PC using the “N-Com Wizard”

programme or through the “App N-Com” for Smartphone Android, iPhone, iPad.

11. AUTO ON / OFF FUNCTION

The system does not have to be turned on and off every time you use the motorcycle: thanks to the

triaxial accelerometer, if the helmet does no move for more than 30 seconds, the M5 system goes into

“deep sleep” mode. The system is completely turned on as soon as movement is detected.

If the system is in “deep sleep” mode for more than 7 days, it turns off completely. To turn it back on, the

“on” key need to be pressed.

12. RIDER-PASSENGER INTERCOM

12.1. Rider-Passenger intercom pairing up

 Put both systems in Setting mode (press the “on” key and keep it pressed for 4 seconds, until

the red LED starts to flash quickly);

 Press the “n” key briefly on one of the systems (Channel 1 pairing up).

12.2. Rider-Passenger intercom function

After carrying out the proper pair up procedure, turn on the two helmets. Intercom connection will be

established automatically (this will take a few seconds. Wait until you hear the vocal confirmation

message). If automatic connection is not possible, proceed with the manual connection.

Manual intercom connection With M5 turned on, briefly press “n”.

Manual intercom

disconnection

With M5 turned on, briefly press “n”.