User's Manual

8
3.2. N-Com App
The N-Com system is pre-set for connection to the “N-Com App”, the Android / iOS
application used to configure and control the N-Com system directly from a Smartphone.
With the N-Com App, you can carry out most of the functions included in the N-Com Wizard program or,
alternatively, it can be used as a wireless Bluetooth keypad.
The N-Com APP can be downloaded free of charge from Google Play or Apple Store.
For additional details, please visit the website www.n-com.it
3.3. Pairing up Bluetooth devices
 Set the system in Setting Mode (Press “BACK” and keep it pressed for 4 seconds, until the red
LED start to flash quickly);
 On the Bluetooth device (smartphone, GPS, lettore Mp3) turn on the search for Bluetooth
devices;
 Select the N-Com device. If a password is requested, enter 0000 (four zeros);
 After a few seconds, the connection between the two devices will be established.
Note: The affiliation is stored in the helmet and in the cell phone and it is not lost when the two devices
are turned off. As a result it needs to be carried out only once.
Automatic Connection
Once the Bluetooth device has been paired up, connection is automatic
when the system is turned on.
Manual Connection
In case connection is not automatically initiated after a few seconds, you
can connect manually from the Bluetooth device or by pressing briefly at
the same time “on” and “n”.
4. MOBILE PHONE
Answering a phone call
Briefly press any key when you hear the incoming call signal.
Voice call (if equipped) Briefly press “on” and “n” at the same time.
Redial last number Press “on” and “n” and keep it pressed for about 2 seconds.
Chiamata Numero Amico
Press “n” and keep it pressed for about 2 seconds.
Hanging up/rejecting a
phone call
Press “on” and keep it pressed for about 2 seconds.
Transferring a call from
helmet to mobile phone
To transfer an ongoing call from the helmet to the mobile phone, press
both “on” and “n” at the same time and keep them pressed for 2 seconds.
Manual connection Briefly press “on” and “n” at the same time.
Manual disconnection Press “” and keep it pressed for about 4 seconds.
Conference call function
When a call comes in on a mobile phone connected via Bluetooth to M5, the Rider-Pillion Passenger
intercom is temporarily turned off. However, if you wish to share the phone call with the other helmet,
simply turn on the intercom manually during the phone call.