User's Manual

Table Of Contents

ONLY FOR HELMET N105 – positioning of wiring and microphone

Positioning the right side wiring and the microphone:

 Lift up the plastic lining of the cheek padding (Fig. 10)

 Insert the microphone into the eyelet (Fig. XX) and position it in the special housing, then

inserting the metal boom in the groove found in the chin guard coupling frame (Fig. XX)

Caution: make sure that the side of the microphone support with the writing “N-Com” is facing

inward.

 Fix the cable inside the helmet and make sure the right fixing clip snaps into its housing (Fig.

XX)

 Reposition the plastic lining of the cheek padding, arranging it behind the two small stop hooks

(Fig. XX)

Positioning the left side wiring:

 Lift up the plastic lining of the cheek padding (Fig. XX)

 Fix the cable inside the helmet and make sure the left fixing clip snaps into its housing (Fig. XX)

 Reposition the plastic lining of the cheek padding, arranging it behind the two small stop hooks

(Fig. XX)

Fig. Fig.