User's Manual

B901L
17
 On your own mobile phone (paired up and connected to the N-Com system), call the phone
number you wish to assign to the selected speed dialling position. The call is interrupted before it
goes through, and the selected number will be saved; at this point you will hear the special voice
announcement confirming the selection (“ Save Speed Dialling 1” / “ Save Speed Dialling 2/ “ Save
Speed Dialling 3” ).
You can also configure these setting through the program “N-Com EASYSET” or
through an Android Smartphone, iPhone, iPad on which the “N-Com EASYSET”
App has been installed.
Using the stored numbers
To access the “Speed Dialling” menu, press at the same time the “ON” and “N” keys (“ Speed Dialling”) ,
then use the keys “” and “” to scroll through the menu items.
Then press the “ON” key to confirm the selection of one of the following items:
 Call Last Number Dialled
 Speed Dialling 1
 Speed Dialling 2
 Speed Dialling 3
 Cancel
If you wish to exit the “Speed Dialling” menu, press the keys “” and “” until you hear the
command “ Cancel ”, then press “ON” to confirm.
N.B.: If no key is pressed within 15 seconds, the system exits the “Speed Dialling” menu.
7.2. Conference call function
When a call comes in on a mobile phone connected via Bluetooth to B901L, the intercom is
temporarily turned off. However, if you wish to share the phone call with the other helmet, simply
turn on the intercom manually during the phone call.
Turning on the phone conference
call function
During the phone call, briefly press “N” (channel 1).
During the phone call, press the “N” key twice (channel 2).
During the phone call, press the “N” key three times (channel 3).
Turning off the phone conference
call function
During the phone call, briefly press “N”.