User's Manual

B901L
21
13.3. Poor visibility light (mode 3)
The poor visibility light allows you to be more visible in case of fog or limited visibility. If selected, the
LEDs of the system will flash intermittently.
If the emergency brake light is activated during braking, all LEDS will flash more quickly.
14. N-COM INTERCOM (SERIES “900”)
The N-Com B901L system allows communication with other N-Com systems, up to a distance of
about 700 m (in open field, with no obstacles).
Important: The procedure described below refers exclusively to the pairing up and operation between
the B901L and the “900” series N-Com systems.
To pair up to N-Com systems of a range other than the “900” series, please refer to the procedure
described in chapter 15 “Universal Intercom”.
N.B.: The range and quality of the communication may vary significantly depending on the presence
of obstacles, weather conditions, magnetic fields.
N.B.: The range of the communication varies depending on the N-Com systems used.
14.1. Intercom pairing up
 Make sure the B901L is turned off;
 Put the systems in “Configuration” mode: press the “ON” key and keep it pressed for 4
seconds, until the blue LED starts flashing;
 On both systems, press the key “” until you reach the option “ Intercom pair up ”;
 On system A, press the key pertaining to the “pre-setting position” where you wish to save
system B.
Pairing up CHANNEL 1 Briefly press “N”.
Pairing up CHANNEL 2 Press the “N” key twice.
Pairing up CHANNEL 3 Press the “N” key three times.
The Intercom connection with the selected channel is automatically activated at the end of the pair up
procedure.
14.2. Intercom function (one-to-one connection)
To establish an Intercom connection with one of the systems stored in memory, simply press the
command related to the channel where the system was saved.
Connection CHANNEL 1 Briefly press “N”.
Call CHANNEL 2 Press the “N” key twice.
Call CHANNEL 3 Press the “N” key three times.
Disconnection of active intercom Briefly press “N”.