User's Manual

10
3.2. Connecting the battery
Only for Jet helmets or flip - up helmets :
Fig. 15 Fig. 16
Hook up the battery cable (Red+Black) to the connector located on the wiring system
(Fig. 15 ).
Insert the battery in its holder, first positioning the side equipped with the cables
outlet, keeping the cables un derneath the plastic tab (Fig. 16 ).
Fig. 17 Fig. 18
Insert the connectors set in the cable-stop guide located on the side of the battery-
holder (Fig. 17 and 18 ).
Only for full face helmets :
Fig. 19
Position the battery in the right
polystyrene cheek pad housing (Fig.
19 ).