User's Manual

B1
13
Conference call function
B1 allows a conference call with Rider and Pillion Passenger.
When a call comes in on a mobile phone connected via Bluetooth to B1, the Rider-Pillion
Passenger intercom is temporarily turned off. However, if you wish to share the phone call
with the other helmet, simply turn on the intercom manually during the phone call (by
briefly pressing “on”).
Caution: this function is available only if the Pillion Passenger helmet is also equipped with
a N-Com system provided with the same function.
7. GPS SATELLITE NAVIGATOR FUNCTIONS
B1 is compatible with the most common satellite navigators for motorcycles.
By connecting the N-Com system to the GPS, all instructions will be transferred to the
helmet.
Every time the navigator communicates instructions, the intercom via Bluetooth with the
Pillion Passenger is cut off and automatically restored at the end of the communication.
Note: If the navigator is pre-set for connection to a Bluetooth mobile phone, you will be
able to receive the phone call audio directly in the helmet through the GPS. In this
case, you can answer the call directly from the navigator.
GPS Conference Call Function
The Conference function allows you to keep the “Rider-Pillion Passenger” intercom open
even while the satellite navigator is giving instructions, thus preventing the intercom mode
to be turned off every time the navigator gives instructions.
Caution: this function is available only if the Pillion Passenger helmet is also equipped with
a N-Com system provided with the same function.
At the end of the GPS communication, the intercom with the second helmet stays open and
the "Conference" setting is stored for future GPS communications.
8. BLUETOOTH A2DP MUSIC PLAYER
You can listen to high quality music by connecting B1 to a device equipped with Bluetooth
A2DP (Advanced Audio Distribution Profile) protocol.
The B1 system is also equipped with Bluetooth AVRCP (Audio Video Remote Control
Profile) protocol, which allows you to stop and resume music reproduction directly from the
helmet (with devices equipped with AVRCP).
Connection to A2DP music
player
The connection is automatic when you turn on the
system. Wait a few seconds for the connection.
Play music (Play) Press the “” button and keep it pressed for 2 seconds.
Pause function (Pause) When the player is connected and playing music, press
“” for 2 seconds.
Next track (Skip) When the player is playing music, press “” for 4 about
seconds.
Stop playing music (Stop)
Press “” for 2 seconds.
Note: The Bluetooth intercom does not work while listening to an A2DP audio source or an
un Mp3 player connected via cable.