User's Manual

44
Thrott le Speed
Thrott le speed allow s you to limit t he maximum speed
t hat the thrott le servo w ill be driven t o match your
movements on the trigger. There are four parameters
t hat can be adjusted to precisely set up your limit ing.
Throttle Speed determines the percent age of full speed
that is applied to the throttle movements that are
above the t hrott le t rigger sett ing. 100 is maximum
servo movement rate. 1 is minimum rat e. Default is
100 (full speed).
Brake Speed determines the percentage of full speed
t hat is applied t o braking movement s that are above
t he t rigger sett ing. 100 is maximum servo movement
rat e. 1 is minimum rat e. Default is 100 (full speed).
Thrott le Trigger set s t he minimum amount of cont rol
input before the speed limiter becomes active. At 0%,
limit ing is alw ays act ive (input is alw ays > = 0%). At
5 0 % , lim it in g is o n ly act ive if t he t h rot t le is o n h alf w ay
or more.
Brake T rigger set s t he minimum amount of cont rol
input before the speed limiter becomes active. At 0%,
limit ing is alw ays act ive (input is alw ays > = 0%). At
5 0 % , lim it in g is o n ly act ive if t he brake is o n h alf w ay
or more.