User's Manual

15
Binding your transceiver the first time
1. I nstall a transceiver into your vehicle.
(For this example, install a transceiver into your electric touring car, which will be known to
the Sensor as “Model 1.”)
2. I n the Sensor’s “Manage Models” function menu, go to “Active Model” and select the
appropriate model I D for the vehicle you are going to bind to. (For this example, select “Model
1.”)
3. After putting your model on a stand to prevent runaways, power up the vehicle and
transceiver.
4. Bring the Sensor close to the model. This will help the transceiver and Sensor to “find”
each other more easily.
5. I n the Sensor’s “Manage Models” function menu, select “Rebind.”
6. Using an extended paperclip, depress and hold the transceiver’s “bind” button until the
onboard LED illuminates.
7: Confirm binding on your Sensor by pressing the “OK”as the transceiver VI N number is
displayed.
The binding process is now complete!