User's Manual

Steering Trim

Steering trim adjusts the

center point of the steering

servo by adjusting the

center point within the

steering servo’s total travel

range. Unlike steering sub-

trim, the steering left and

right end points are

unaffected by steering trim;

by moving the center point

of the steering servo using

trim, the center position

moves closer to one end

point or the other.

Steering trim should be

used only after you have

initially adjusted steering

sub-trim.

Steering (Ch1)

Throttle (Ch2)

Shift (Ch3)

Steering Trim

On the driving screen,

steering trim is represented

by the position of the

pointer on the upper bar.

As you change the steering trim, it is shown graphically on the driving screen trim indicator

bars:

Steering trim is centered in range (value = 0)

Steering trim is offset to the RI GHT (+ ve value)

Steering trim is offset to the LEFT (-ve value)

If you find that you have to use a large amount of steering trim to get the vehicle to

drive straight, you should consider resetting the steering trim to 0 and re-adjusting the

servo horn on the servo output shaft.