User's Manual

39
Adjusting Throttle Dual Rate I ncrement
Use the navigation controls to adjust throttle dual rate increment as follows:
1. Access the top function menu
from the driving screen.
men
u
2. Navigate to the Throttle ( Ch2)
menu
or : then
3. Navigate to DR I ncrement.
or
Value Description
4. Change the value.
or
1-20
Throttle dual rate value changes by set
increment.
Use smaller values for finer dual rate
control.
Use larger values for coarser dual rate
control.
Brake End Point
The brake end point value
adjusts how far the throttle
goes to the BRAKE end with
respect to its full range of
motion to the brake end. End
point adjustment should be
adjusted prior to other
throttle settings, as the brake
end point value affects other
throttle settings.
The brake end point is set
independently of the throttle
end point (which adjusts how
far the throttle moves to the
THROTTLE end).
The brake end point setting should be used to do the following:
• Limit throttle throw to reduce mechanical binding or servo strain that may occur on full
servo throw to the brake end. For example, if the servo is trying to pull a mechanical
brake linkage farther than it is mechanically able.
• Adjust braking range to reduce the full braking force of the vehicle.