User's Manual

Changing the dual rate setting has the following visual effect on the driving screen bars:

Full servo range is used.

Lower dual rate value reduces servo range.

Adjusting Shift Servo Dual Rate

Use the navigation controls to adjust shift servo dual rate as follows:

1. Access the top function menu

from the driving screen.

men

2. Navigate to the Shift ( Ch3)

menu.

or : then

3. Navigate to Dual Rate.

Value Description

0 Shift servo range is set to minimum (0% ).

1-99

Shift servo range is set to a percentage of full range.

For example, value “50” gives 50% of full servo

range.

4. Change the value.

100 Shift servo range is set to full (100% )

Dual Rate and End Point Adjustment

Full servo range is determined by the shift servo low and high end point adjustments. The dual

rate value determines the relative servo range between the low and high end points. The

servo will never move beyond the set end point adjustments, no matter what dual rate setting

is applied.

Low End Point

The shift servo low end point

value adjusts the shift servo’s

starting position at reset. This is

intended to be low gear and

goes with the downshift sound

event. The end point

adjustments should be adjusted

prior to other settings.

The low end point is set

independently of the high end

point (which adjusts how far

the shift servo moves to the

HIGH end).