User's Manual

65
Failsafes
You can set up the failsafe positions of the servos so that in the event
of loss of signal, the servos go to their set failsafe positions. Default
failsafe positions are centered steering and trim.
Setting Failsafe Modes
Use the navigation controls to set the failsafe modes as follows:
1. Access the top function menu
from the driving screen.
men
u
2. Navigate to the Advanced
menu.
or : then
3. Navigate to the Failsafe
menu.
or : then
4. Navigate to Steering.
or
Value Description
Hold Steering servo holds last known position.
5. Change the steering servo
failsafe setting.
or
Set Steering servo goes to set failsafe position.
6. Navigate to Throttle.
or
Value Description
Hold Throttle servo holds last known position.
7. Change the throttle servo
failsafe setting.
or
Set Throttle servo goes to set failsafe position.
8. Navigate to Shift.
or
Value Description
Hold Shift servo holds last known position.
9. Change the shift servo
failsafe setting.
or
Set Shift servo goes to set failsafe position.