User's Manual

67
Sensor Digital RC Desktop
The innovative Sensor Digital RC Desktop can be used to program the functionality of your
Sensor using your computer. The supplied adaptor cable is used to connect your Sensor to an
available USB port on your computer, allowing your Sensor and the RC Desktop to communicate
and exchange information. The RC Desktop interface has the same menu structure as that
contained within your Sensor; and has been designed to be very easy to use.
Information may be transferred between your Sensor and the RC Desktop so that you can
download your current setting information to your computer, make changes, and then upload
the newer settings. Updating the Sensor firmware is as easy as uploading a file, or using your
Internet connection to retrieve the latest firmware file directly from Nomadio and upload it to
your Sensor in one easy step.
After you start using your Sensor and install your RC Desktop, we strongly recommend that you
perform the registration process so that you can receive special incentives and privileges, and
be kept abreast of the latest Nomadio developments and news. The online registration process
is fast and easy, and requires an I nternet connection.
Minimum System Requirements
Processor: Pentium 3
RAM: 128MB
HDD space: 100MB
CD-ROM: Available CD-ROM drive
Display: VGA or better
Ports: Available USB port (1.1 or 2.0 port
recommended)
OS: Windows 2000, XP
Installing the RC Desktop
1. Install the Nomadio Digital RC Desktop CD into your computer’s CD-ROM drive.
2. If your computer has AutoPlay enabled, the installation wizard begins automatically.
If AutoPlay is not enabled, locate and run the RCDesktopSetup.exe file located in the
root directory on the CD-ROM.